main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina132ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina132ua: viewers · Ray
ina132ua-etched.fit.json ina132ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina132ua-etched.glb ina132ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
ina132ua-etched.step ina132ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
ina132ua.glb Publish 0.1.0 · Ray
ina132ua.kicad_mod Publish 0.1.0 · Ray
ina132ua.kicad_sym Publish 0.1.0 · Ray
ina132ua.lbr ina132ua: factory component page (tier=lcsc) · Ray
ina132ua.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ina132ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
README.md ina132ua: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

INA132UA

Texas Instruments · Differential OpAmps · SOIC-8

INA132UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Ref input Reference input pin. Sets the output voltage reference level; typically tied to ground for bipolar supplies or to mid-supply for single-supply operation. Connects to the internal 40kΩ resistor of the feedback network.
2 -In input Inverting differential input. Connects through an internal 40kΩ resistor to the op amp inverting node. Differential input impedance is 80kΩ typical.
3 +In input Non-inverting differential input. Connects through an internal 40kΩ resistor to the op amp non-inverting node. Differential input impedance is 80kΩ typical.
4 V- power_in Negative supply rail. Connect to -1.35V to -18V for dual-supply operation or to ground (0V) for single-supply operation. Total supply (V+ to V-) must not exceed 36V.
5 Sense input Output sense pin. Normally tied to the Output pin (pin 6) directly; can be used to Kelvin-sense the load or drive a booster stage inside the feedback loop. Connects to the internal 40kΩ feedback resistor network.
6 Output output Amplifier output. Delivers (V+In − V−In) + VRef at unity gain. Output current limit is typically ±12mA continuous; stable driving capacitive loads up to 10,000pF.
7 V+ power_in Positive supply rail. Accepts 2.7V to 36V single-supply or +1.35V to +18V dual-supply. Total supply (V+ to V-) must not exceed 36V.
8 NC unconnected No Internal Connection. Leave floating or tie to any convenient potential; not electrically connected to the die.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • INA132UA
  • INA132UAU
  • INA132UAPA
  • INA132UAP

CAD (KiCad official)

  • Symbol: INA132UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina132ua-etched.step / ina132ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina132ua.step / ina132ua.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (13 pp, sha256 e059058a7fdff4c7, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF