← Commit history
page.json+9−6@@ -32,19 +32,19 @@ "number": "1", "name": "Ref", "type": "input",- "description": "Reference input pin. Sets the output voltage reference level; typically tied to ground for bipolar supplies or to mid-supply for single-supply operation. Connects to the internal 40k\u03a9 resistor of the feedback network."+ "description": "Reference input pin. Sets the output voltage reference level; typically tied to ground for bipolar supplies or to mid-supply for single-supply operation. Connects to the internal 40kΩ resistor of the feedback network." }, { "number": "2", "name": "-In", "type": "input",- "description": "Inverting differential input. Connects through an internal 40k\u03a9 resistor to the op amp inverting node. Differential input impedance is 80k\u03a9 typical."+ "description": "Inverting differential input. Connects through an internal 40kΩ resistor to the op amp inverting node. Differential input impedance is 80kΩ typical." }, { "number": "3", "name": "+In", "type": "input",- "description": "Non-inverting differential input. Connects through an internal 40k\u03a9 resistor to the op amp non-inverting node. Differential input impedance is 80k\u03a9 typical."+ "description": "Non-inverting differential input. Connects through an internal 40kΩ resistor to the op amp non-inverting node. Differential input impedance is 80kΩ typical." }, { "number": "4",@@ -56,13 +56,13 @@ "number": "5", "name": "Sense", "type": "input",- "description": "Output sense pin. Normally tied to the Output pin (pin 6) directly; can be used to Kelvin-sense the load or drive a booster stage inside the feedback loop. Connects to the internal 40k\u03a9 feedback resistor network."+ "description": "Output sense pin. Normally tied to the Output pin (pin 6) directly; can be used to Kelvin-sense the load or drive a booster stage inside the feedback loop. Connects to the internal 40kΩ feedback resistor network." }, { "number": "6", "name": "Output", "type": "output",- "description": "Amplifier output. Delivers (V+In \u2212 V\u2212In) + VRef at unity gain. Output current limit is typically \u00b112mA continuous; stable driving capacitive loads up to 10,000pF."+ "description": "Amplifier output. Delivers (V+In − V−In) + VRef at unity gain. Output current limit is typically ±12mA continuous; stable driving capacitive loads up to 10,000pF." }, { "number": "7",@@ -138,5 +138,8 @@ "docs/ina132ua-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }