← Commit history

ina132ua: factory component page (tier=lcsc)

Ray ·9a8f3f3d2b · ·parent ec97f1e
3 files changed +26−23
README.md+8−8
@@ -8,14 +8,14 @@ INA132UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extrac  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Ref | input | Reference input. Sets the output DC offset; typically tied to ground (dual-supply) or mid-supply (single-supply) via a low-impedance source. Internally connected through a 40kΩ resistor to the op-amp non-inverting input. |-| 2 | -In | input | Inverting differential input. Connected through an internal 40kΩ resistor to the op-amp inverting node. Common-mode range extends to (V-) for single-supply operation. |-| 3 | +In | input | Non-inverting differential input. Connected through an internal 40kΩ resistor to the op-amp non-inverting node. Common-mode range extends to (V-) for single-supply operation. |-| 4 | V- | power_in | Negative supply. Tie to ground for single-supply operation (2.7V to 36V at V+), or to the negative rail for dual-supply operation (down to -18V). Absolute max V+ to V- is 36V. |-| 5 | Sense | input | Sense input for the output-side feedback network. Normally tied to the Output pin (pin 6); can be used to include external gain-setting resistors or to remote-sense the load for Kelvin connection. |-| 6 | Output | output | Amplifier output. Delivers Vout = (V+In - V-In) + VRef with G = 1. Short-circuit current limit typically ±12mA; stable driving load capacitance up to 10,000pF. |-| 7 | V+ | power_in | Positive supply. Single-supply range 2.7V to 36V (referenced to V-), or +1.35V to +18V for dual-supply operation. Recommended bypassing to V- with a local ceramic capacitor. |-| 8 | NC | unconnected | No internal connection. May be left floating or tied to any convenient potential. |+| 1 | Ref | input | Reference input pin. Sets the output voltage reference level; typically tied to ground for bipolar supplies or to mid-supply for single-supply operation. Connects to the internal 40kΩ resistor of the feedback network. |+| 2 | -In | input | Inverting differential input. Connects through an internal 40kΩ resistor to the op amp inverting node. Differential input impedance is 80kΩ typical. |+| 3 | +In | input | Non-inverting differential input. Connects through an internal 40kΩ resistor to the op amp non-inverting node. Differential input impedance is 80kΩ typical. |+| 4 | V- | power_in | Negative supply rail. Connect to -1.35V to -18V for dual-supply operation or to ground (0V) for single-supply operation. Total supply (V+ to V-) must not exceed 36V. |+| 5 | Sense | input | Output sense pin. Normally tied to the Output pin (pin 6) directly; can be used to Kelvin-sense the load or drive a booster stage inside the feedback loop. Connects to the internal 40kΩ feedback resistor network. |+| 6 | Output | output | Amplifier output. Delivers (V+In − V−In) + VRef at unity gain. Output current limit is typically ±12mA continuous; stable driving capacitive loads up to 10,000pF. |+| 7 | V+ | power_in | Positive supply rail. Accepts 2.7V to 36V single-supply or +1.35V to +18V dual-supply. Total supply (V+ to V-) must not exceed 36V. |+| 8 | NC | unconnected | No Internal Connection. Leave floating or tie to any convenient potential; not electrically connected to the die. |  ## Key specifications 
ina132ua.lbr+9−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments Differential OpAmps, SOIC-8</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="INA132UA">+  <description>Texas Instruments Differential OpAmps, SOIC-8</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="INA132UA" prefix="U">-  <description></description>+  <description>Texas Instruments Differential OpAmps, SOIC-8</description>   <gates>     <gate name="G$1" symbol="INA132UA" x="0" y="0"/>   </gates>@@ -120,7 +121,12 @@         <connect gate="G$1" pin="Output" pad="6"/>         <connect gate="G$1" pin="Sense" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="INA132UA" constant="no"/>+          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
page.json+9−12
@@ -32,49 +32,49 @@         "number": "1",         "name": "Ref",         "type": "input",-        "description": "Reference input. Sets the output DC offset; typically tied to ground (dual-supply) or mid-supply (single-supply) via a low-impedance source. Internally connected through a 40kΩ resistor to the op-amp non-inverting input."+        "description": "Reference input pin. Sets the output voltage reference level; typically tied to ground for bipolar supplies or to mid-supply for single-supply operation. Connects to the internal 40k\u03a9 resistor of the feedback network."       },       {         "number": "2",         "name": "-In",         "type": "input",-        "description": "Inverting differential input. Connected through an internal 40kΩ resistor to the op-amp inverting node. Common-mode range extends to (V-) for single-supply operation."+        "description": "Inverting differential input. Connects through an internal 40k\u03a9 resistor to the op amp inverting node. Differential input impedance is 80k\u03a9 typical."       },       {         "number": "3",         "name": "+In",         "type": "input",-        "description": "Non-inverting differential input. Connected through an internal 40kΩ resistor to the op-amp non-inverting node. Common-mode range extends to (V-) for single-supply operation."+        "description": "Non-inverting differential input. Connects through an internal 40k\u03a9 resistor to the op amp non-inverting node. Differential input impedance is 80k\u03a9 typical."       },       {         "number": "4",         "name": "V-",         "type": "power_in",-        "description": "Negative supply. Tie to ground for single-supply operation (2.7V to 36V at V+), or to the negative rail for dual-supply operation (down to -18V). Absolute max V+ to V- is 36V."+        "description": "Negative supply rail. Connect to -1.35V to -18V for dual-supply operation or to ground (0V) for single-supply operation. Total supply (V+ to V-) must not exceed 36V."       },       {         "number": "5",         "name": "Sense",         "type": "input",-        "description": "Sense input for the output-side feedback network. Normally tied to the Output pin (pin 6); can be used to include external gain-setting resistors or to remote-sense the load for Kelvin connection."+        "description": "Output sense pin. Normally tied to the Output pin (pin 6) directly; can be used to Kelvin-sense the load or drive a booster stage inside the feedback loop. Connects to the internal 40k\u03a9 feedback resistor network."       },       {         "number": "6",         "name": "Output",         "type": "output",-        "description": "Amplifier output. Delivers Vout = (V+In - V-In) + VRef with G = 1. Short-circuit current limit typically ±12mA; stable driving load capacitance up to 10,000pF."+        "description": "Amplifier output. Delivers (V+In \u2212 V\u2212In) + VRef at unity gain. Output current limit is typically \u00b112mA continuous; stable driving capacitive loads up to 10,000pF."       },       {         "number": "7",         "name": "V+",         "type": "power_in",-        "description": "Positive supply. Single-supply range 2.7V to 36V (referenced to V-), or +1.35V to +18V for dual-supply operation. Recommended bypassing to V- with a local ceramic capacitor."+        "description": "Positive supply rail. Accepts 2.7V to 36V single-supply or +1.35V to +18V dual-supply. Total supply (V+ to V-) must not exceed 36V."       },       {         "number": "8",         "name": "NC",         "type": "unconnected",-        "description": "No internal connection. May be left floating or tied to any convenient potential."+        "description": "No Internal Connection. Leave floating or tie to any convenient potential; not electrically connected to the die."       }     ],     "provenance": {@@ -138,8 +138,5 @@     "docs/ina132ua-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file