INA106KP

{
  "slug": "ina106kp",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Differential Amplifiers, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ina106kp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina106kp.kicad_sym",
    "ina106kp.kicad_mod",
    "ina106kp.glb",
    "ina106kp.step",
    "ina106kp.lbr",
    "docs/hero.png",
    "docs/ina106kp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina106kp-hero.glb",
    "ina106kp-hero.overlay.json"
  ],
  "component": {
    "mpn": "INA106KP",
    "manufacturer": "Texas Instruments",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Differential Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ina106",
    "parts": {
      "symbol": "ina106kp.kicad_sym",
      "footprint": "ina106kp.kicad_mod",
      "model_3d": "ina106kp-hero.glb",
      "model_3d_plain": "ina106kp.glb",
      "model_3d_step": "ina106kp-etched.step",
      "model_3d_step_plain": "ina106kp.step",
      "lbr": "ina106kp.lbr"
    },
    "distributor_links": {
      "lcsc": "C1347011",
      "digikey": "2156-INA106KP-ND",
      "mouser": "595-INA106KP"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T21:05:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-INA106KP-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-INA106KP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "REF",
        "type": "input",
        "description": "Reference input, connected through a 100kΩ resistor to the op amp non-inverting terminal; the source impedance driving it should be less than 10Ω to maintain good common-mode rejection."
      },
      {
        "number": "2",
        "name": "-IN",
        "type": "input",
        "description": "Negative (inverting) input, connected through a 10kΩ resistor to the op amp inverting terminal; source impedance should be matched with the +IN source to preserve common-mode rejection."
      },
      {
        "number": "3",
        "name": "+IN",
        "type": "input",
        "description": "Positive (non-inverting) input, connected through a 10kΩ resistor to the op amp non-inverting terminal; source impedance should be matched with the -IN source to preserve common-mode rejection."
      },
      {
        "number": "4",
        "name": "V-",
        "type": "power_in",
        "description": "Negative (lowest) supply; recommended supply is ±5V to ±18V in dual supply, or 10V to 36V in single supply with V- at ground."
      },
      {
        "number": "5",
        "name": "SENSE",
        "type": "input",
        "description": "Sense input, connected through a 100kΩ resistor to the op amp inverting terminal."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Amplifier output, which is continuously short-circuit protected to VS/2 and must be kept within the rated output voltage and current range."
      },
      {
        "number": "7",
        "name": "V+",
        "type": "power_in",
        "description": "Positive (highest) supply; absolute maximum supply voltage (V+) - (V-) is 36V."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; the pin can be left floating."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table (Table 4-1) and the figure are a Chinese translation of the TI datasheet; the pin assi; The datasheet does not give an explicit single-supply versus dual-supply pin rule for V-; the descri"
        ],
        "pages_sent": 29,
        "cost_usd": 0.0811,
        "at": "2026-10-11T21:05:42"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ina106",
        "pages": 29,
        "sha256": "58d22ca47333ed82",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina106kp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina106kp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a469744dce7769c31a61123bf4b5fa791c97ba84e76cc01adf715c56c9c5256b",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}