component
INA106KP
Public Made by Adomby adom
Texas Instruments Differential Amplifiers, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA106KP
Texas Instruments · Differential Amplifiers · PDIP-8
INA106KP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input, connected through a 100kΩ resistor to the op amp non-inverting terminal; the source impedance driving it should be less than 10Ω to maintain good common-mode rejection. |
| 2 | -IN | input | Negative (inverting) input, connected through a 10kΩ resistor to the op amp inverting terminal; source impedance should be matched with the +IN source to preserve common-mode rejection. |
| 3 | +IN | input | Positive (non-inverting) input, connected through a 10kΩ resistor to the op amp non-inverting terminal; source impedance should be matched with the -IN source to preserve common-mode rejection. |
| 4 | V- | power_in | Negative (lowest) supply; recommended supply is ±5V to ±18V in dual supply, or 10V to 36V in single supply with V- at ground. |
| 5 | SENSE | input | Sense input, connected through a 100kΩ resistor to the op amp inverting terminal. |
| 6 | OUT | output | Amplifier output, which is continuously short-circuit protected to VS/2 and must be kept within the rated output voltage and current range. |
| 7 | V+ | power_in | Positive (highest) supply; absolute maximum supply voltage (V+) - (V-) is 36V. |
| 8 | NC | unconnected | No internal connection; the pin can be left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
INA106KP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
ina106kp-etched.step/ina106kp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina106kp.step/ina106kp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
58d22ca47333ed82, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).