component
INA103KP
Public Made by Adomby adom
Texas Instruments Instrumentation OpAmps, PDIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242
{
"slug": "ina103kp",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Instrumentation OpAmps, PDIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"amplifiers",
"ina103kp",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ina103kp.kicad_sym",
"ina103kp.kicad_mod",
"ina103kp.glb",
"ina103kp.step",
"ina103kp.lbr",
"docs/hero.png",
"docs/ina103kp-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ina103kp-hero.glb",
"ina103kp-hero.overlay.json",
"ina103kp-etched.glb"
],
"component": {
"mpn": "INA103KP",
"manufacturer": "Texas Instruments",
"package": "PDIP-16",
"pin_count": 16,
"category": "Amplifiers",
"subcategory": "Instrumentation OpAmps",
"datasheet": "https://www.ti.com/lit/ds/symlink/ina103.pdf",
"parts": {
"symbol": "ina103kp.kicad_sym",
"footprint": "ina103kp.kicad_mod",
"model_3d": "ina103kp-hero.glb",
"model_3d_plain": "ina103kp-etched.glb",
"model_3d_step": "ina103kp-etched.step",
"model_3d_step_plain": "ina103kp.step",
"lbr": "ina103kp.lbr"
},
"distributor_links": {
"lcsc": "C1346581",
"digikey": "INA103KP-ND",
"mouser": "595-INA103KP"
},
"distributor_check": {
"checked_at": "2026-10-30T18:34:40Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "INA103KP-ND",
"status": "found"
},
"mouser": {
"pn": "595-INA103KP",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "+Input",
"type": "input",
"description": "Non-inverting input of the balanced differential pair, with differential input impedance of 60 || 2 MΩ || pF and common-mode range of ±11 V minimum (±12 V typical)."
},
{
"number": "2",
"name": "+Gain Sense",
"type": "input",
"description": "Positive gain-sense terminal; an external gain resistor RG is connected between pins 2 and 15 to set gains other than 1 and 100, and connections must be kept short to avoid oscillation."
},
{
"number": "3",
"name": "+Offset Null",
"type": "passive",
"description": "Offset-null terminal used with the external trim circuit of Figure 3 (offset adjust range ±250 mV in that circuit) to null the input offset voltage with zero differential input."
},
{
"number": "4",
"name": "-Offset Null",
"type": "passive",
"description": "Offset-null terminal used together with pin 3 in the external offset trim circuit to null the input offset voltage with zero differential input."
},
{
"number": "5",
"name": "+Gain Drive",
"type": "output",
"description": "Positive gain-drive connection of the input stage that feeds the internal gain-setting network (pin 6 is +RG)."
},
{
"number": "6",
"name": "+RG",
"type": "passive",
"description": "Positive internal gain-resistor connection; for G = 100 V/V pin 14 is connected to pin 6."
},
{
"number": "7",
"name": "Ref",
"type": "input",
"description": "Output reference terminal that should be a low-impedance connection, since a few ohms in series degrades common-mode rejection."
},
{
"number": "8",
"name": "V–",
"type": "power_in",
"description": "Negative power supply; supply range is ±9 V to ±25 V and supplies should be bypassed with 1 µF tantalum capacitors near the device pins."
},
{
"number": "9",
"name": "V+",
"type": "power_in",
"description": "Positive power supply; supply range is ±9 V to ±25 V and supplies should be bypassed with 1 µF tantalum capacitors near the device pins."
},
{
"number": "10",
"name": "Output",
"type": "output",
"description": "Amplifier output with output current of ±40 mA minimum over temperature (TMIN to TMAX) and short-circuit current of ±70 mA; capacitive load stability to 10 nF."
},
{
"number": "11",
"name": "Sense",
"type": "input",
"description": "Output sense terminal, which should be a low-impedance connection and can be taken to the load so that I•R loss is included inside the feedback loop."
},
{
"number": "12",
"name": "–Gain Drive",
"type": "output",
"description": "Negative gain-drive connection of the input stage that feeds the internal gain-setting network (pin 13 is -RG)."
},
{
"number": "13",
"name": "–Gain Sense",
"type": "passive",
"description": "Negative internal gain-resistor connection in the gain-setting network paired with pin 6 (+RG)."
},
{
"number": "14",
"name": "G = 100",
"type": "passive",
"description": "Gain-of-100 select pin; leave open for G = 1 V/V and connect to pin 6 for G = 100 V/V."
},
{
"number": "15",
"name": "-Gain Sense",
"type": "input",
"description": "Negative gain-sense terminal; an external gain resistor RG is connected between pins 2 and 15 to set gains other than 1 and 100, and connections must be kept short to avoid oscillation."
},
{
"number": "16",
"name": "–Input",
"type": "input",
"description": "Inverting input of the balanced differential pair, with differential input impedance of 60 || 2 MΩ || pF and common-mode range of ±11 V minimum (±12 V typical)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin-configuration drawing on page 3 is garbled in text extraction, so the assignment of -Gain Dr; The datasheet does not state the electrical type of the gain-drive pins; 'output' is an inference fr; The offset-null pins are described only through the external trim circuit of Figure 3; no pin-level "
],
"pages_sent": 24,
"cost_usd": 0.0941,
"at": "2026-10-30T18:34:34"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ina103.pdf",
"pages": 24,
"sha256": "9e42ae4b53eaca4c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ina103kp.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
19.177,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ina103kp-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
19.177,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ffec9c74616dafb9e28538b8c56c3bfbf9212fc3c1c0777a1257a580c02b94a5",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}