component

White SMD LED 0603 - Inolux IN-S63BT5UW

Public Made by Adom Basic Part

by adom

0603 SMD White LED · 2.8 V drop @ 5 mA test · 25 mA max

Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
master
in-s63bt5uw / README.md
History Download
John Lauer Pads: square corners, as the datasheet draws them (no added rounding); viewers, lbr, insertion GLB, hero rebuilt from t… 212e82f 18d ago

White SMD LED 0603 - Inolux IN-S63BT5UW

Inolux Corporation IN-S63BT5UW: 0603 SMD White LED, 2.8 V drop @ 5 mA test, 25 mA max. An Adom Basic Part: Adom keeps it on reels for its pick-and-place line, so boards built with it draw on Adom stock.

Key specs

Spec Datasheet
0603 top-view SMD LED in a diffused-lens ('U' lens code), PCB-type moulded package, 1.6 × 0.8 × 0.6 mm p.1, p.9
InGaN white emitter, no dominant wavelength; specified by CIE chromaticity x = 0.27 / y = 0.255 at the 5 mA test current p.3, p.8
Chromaticity binned for white, a full CIE bin table, codes Z1-Z5, A1-A8, B1-B8, C1-C8, D1-D8, E1-E4, AE-AG p.4
The '5' in the part number is Inolux's test-current code, this variant is specified and tested at 5 mA, not the series' default 20 mA ((Blank) = 20 mA, 5 = 5 mA) p.9, p.3
Forward voltage 2.8 V typ at the 5 mA test current p.3
Luminous intensity 320 mcd typ at 5 mA, through the diffused lens over a 120° viewing angle (2θ1/2) p.3, p.8
25 mA max continuous forward current; 100 mA peak at 1/10 duty, 0.1 ms pulse; 5 V max reverse voltage; 75 mW max dissipation p.2
Operating −30 to +85 °C, storage −40 to +90 °C p.2
Moisture sensitive and ESD sensitive (InGaN), ships dry-packed in a sealed moisture-barrier anti-static bag p.2, p.12
Supplied on tape and reel, 4000 pcs per reel (EIA-481-1A conductive black carrier tape) p.10, p.11

Notes for designers

IN-S63BT5UW is the white member of Inolux's IN-S63BT series, a low-profile 0603 top-view indicator LED, and the one variant with a diffused lens, the 'U' in the part number is the lens code. (p.9) The '5' is the Current field of the same numbering scheme: this variant is specified and tested at 5 mA rather than the series' usual 20 mA. (p.9) The die is InGaN, and being white there is no dominant wavelength: the colour is specified as CIE chromaticity x = 0.27 / y = 0.255 (p.3) and binned across a full CIE table (codes Z1-Z5 through AE-AG). (p.4)

At the 5 mA test point it drops 2.8 V typ and returns 320 mcd (p.3), a lot of light for a quarter of the usual current. Do not read that 2.8 V as a 20 mA figure: every guaranteed number in the electrical table for this part is a 5 mA number. (p.3) From a 5 V rail, (5 − 2.8) / 0.005 = 440 Ω lands it on its test point; the datasheet asks for a current-limiting resistor explicitly. (p.13)

The absolute maximums still allow 25 mA continuous and 100 mA pulsed (1/10 duty, 0.1 ms), (p.2) but above 5 mA you are off the characterized map. The diffused lens plus 120° viewing angle (p.3) make it a soft, wide source rather than a spot. Reverse voltage is rated to only 5 V, (p.2) and InGaN chips are static-sensitive devices, ESD precautions apply in design and assembly. (p.2)

Footprint

Redrawn from the datasheet land pattern (the previous pads were off by up to 0.5 mm).

Source: Land pattern from Inolux IN-S63BT series datasheet V1.2, p.1 (Recommended Solder Pattern).

mm Datasheet KiCad standard (LED_0603_1608Metric) Previous This page
Pad length (along the part) 0.6 0.875 0.9 0.6
Pad width 0.9 0.95 1 0.9
Gap between pads 0.8 0.7 0.7 0.8
Centre to centre 1.4 1.575 1.6 1.4
Overall 2 2.45 2.5 2
Corner radius not specified 0.2188 (ratio 0.25) 0.225 (ratio 0.25) square (as drawn)
Corners: square, as the datasheet draws them. The datasheet does not call for rounded corners, so the footprint does not add any.

Polarity: pad 1 = K (cathode, -X), pad 2 = A, matching the symbol (K = pin 1, A = pin 2) and the datasheet's cathode mark; the silkscreen bracket marks the cathode end.

Chip outline

The part's 3D outline in the standard pose (pad 1 toward the viewer), drawn from the STEP by Adom's OpenCascade service; the part number sits where the laser-etched mark is on the 3D model and reads the same way.

Symbol options

The default symbol, IN-S63BT5UW.kicad_sym (the one in the Symbol & Footprint panel), is the plain standard symbol. IN-S63BT5UW-outline.kicad_sym is the same symbol with the part's 3D chip outline drawn beside it, its part number placed and reading as on the 3D model.

Ordering
MPN IN-S63BT5UW
Manufacturer Inolux Corporation
Adom stock Adom Basic Part, stocked on reels for Adom's pick-and-place line; reel counts on pnp-inventory
Other sources adom-parts-search compares Mouser, DigiKey and JLCPCB

Downloads

File What it is
IN-S63BT5UW.kicad_sym KiCad symbol (standard symbol, the page default)
IN-S63BT5UW-outline.kicad_sym KiCad symbol with the 3D chip outline
IN-S63BT5UW.kicad_mod KiCad footprint (datasheet land pattern)
IN-S63BT5UW.step 3D STEP with the part number laser-etched (default)
IN-S63BT5UW-uncoloured.step 3D STEP before the colour and etch passes (the bare KiCad model)
IN-S63BT5UW.glb 3D GLB of the etched model (board use)
IN-S63BT5UW.lbr Fusion 360 / EAGLE library
IN-S63BT5UW.adom-lbr.json adom-lbr part (converts to Altium, KiCad, EAGLE)
IN-S63BT5UW-datasheet.pdf Datasheet (release asset)

Provenance

  • Datasheet: IN-S63BT series, Top View SMD LED 0603 PCB Type, V1.2 revised 10 March 2022, Inolux Corporation. Manufacturer copy. md5 0a3f815d48308fe542a24a4a4ac7f0ce
  • Footprint: Land pattern from Inolux IN-S63BT series datasheet V1.2, p.1 (Recommended Solder Pattern). Pads redrawn on 2026-10-03.
  • 3D model and symbol: unchanged by the footprint pass; the etched STEP adds a flat virtual part-number mark (an identification aid, not the maker's marking).
  • Earlier passes: provenance/ and CHANGES.md.

More