by adom
0402 SMD Red LED · 2.1 V drop · 25 mA max
master
John Lauer
Footprint per the manufacturer's land pattern (kept), derived viewers/lbr/hero rebuilt, lbr-hover on both viewers, READ…
5381890
17d ago
Assembly animation
A small 3D scene of IN-S42ATR on a test board. Static lowers the part onto its pads; Pick & Place shows Adom's pick-and-place nozzle lifting it out of the carrier tape (pocket sizes from the datasheet) and placing it. The board is a thick illustrative slab, not a real stack-up, and the pads in the scene follow this page's footprint.
Open the animation (drag to orbit, scroll to zoom; the buttons switch between Static and Pick & Place).
The scene is docs/assembly.html, which loads IN-S42ATR.insertion.glb from this page.
# Assembly animation
A small 3D scene of IN-S42ATR on a test board. **Static** lowers the part onto its pads; **Pick & Place** shows Adom's pick-and-place nozzle lifting it out of the carrier tape (pocket sizes from the datasheet) and placing it. The board is a thick illustrative slab, not a real stack-up, and the pads in the scene follow this page's footprint.
[Open the animation](https://wiki.adom.inc/adom/in-s42atr/render/docs/assembly.html) (drag to orbit, scroll to zoom; the buttons switch between Static and Pick & Place).
The scene is `docs/assembly.html`, which loads `IN-S42ATR.insertion.glb` from this page.