main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers im241l6s1bauma1: viewers · Ray
im241l6s1bauma1-etched.glb Publish 0.1.0 · Ray
im241l6s1bauma1-etched.step im241l6s1bauma1: factory component page (tier=mfr) · Ray
im241l6s1bauma1-hero.glb im241l6s1bauma1: hero GLB from the etched model (keeps the MPN mark) · Ray
im241l6s1bauma1-hero.overlay.json Publish 0.1.0 · Ray
im241l6s1bauma1.glb Publish 0.1.0 · Ray
im241l6s1bauma1.kicad_mod Publish 0.1.0 · Ray
im241l6s1bauma1.kicad_sym Publish 0.1.0 · Ray
im241l6s1bauma1.lbr Publish 0.1.0 · Ray
im241l6s1bauma1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 24 pins · Ray

IM241L6S1BAUMA1

Infineon Technologies · IGBTs · SOP-23

IM241L6S1BAUMA1 from Infineon Technologies, in a SOP-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Logic ground; the reference for the input logic.
2 VB(U) power_in U-phase high-side floating IC supply, VBS recommended 12.5 V to 17.5 V relative to VS, with undervoltage threshold typ. 11.1 V rising and 10.9 V falling.
3 VDD1 power_in Low-side control supply 1, recommended 13.5 V to 16.5 V (absolute max 20 V) referenced to VSS.
4 HIN(U) input U-phase high-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down.
5 LIN(U) input U-phase low-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down.
6 RFE bidirectional Combined RCIN programmable fault-clear timer, open-drain fault output and enable input, normally pulled to 3.3 V through an RC network; pulling it low disables the IPM.
7 VB(V) power_in V-phase high-side floating IC supply, VBS recommended 12.5 V to 17.5 V relative to VS, with undervoltage threshold typ. 11.1 V rising and 10.9 V falling.
8 VDD2 power_in Low-side control supply 2, recommended 13.5 V to 16.5 V (absolute max 20 V) referenced to VSS.
9 HIN(V) input V-phase high-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down.
10 LIN(V) input V-phase low-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down.
11 VTH output Direct access to the built-in NTC thermistor (47 kΩ typ. at 25°C) referenced to VSS, needing an external pull-up to VDD or +5 V.
12 VB(W) power_in W-phase high-side floating IC supply, VBS recommended 12.5 V to 17.5 V relative to VS, with undervoltage threshold typ. 11.1 V rising and 10.9 V falling.
13 VDD3 power_in Low-side control supply 3, recommended 13.5 V to 16.5 V (absolute max 20 V) referenced to VSS.
14 HIN(W) input W-phase high-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down.
15 LIN(W) input W-phase low-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down.
16 ITRIP input Over-current shutdown input with positive-going threshold typ. 500 mV (475 to 525 mV) and a 500 ns input filter.
17 P power_in Positive bus input voltage for the high-side IGBTs, recommended up to 400 V (450 V max rating, 500 V surge).
18 U/VS(U) passive U-phase output connected to the motor and the U-phase high-side floating supply offset, robust to -50 V transient.
19 NU passive U-phase low-side emitter for phase current measurement, to be connected to VSS with a short connection.
20 NV passive V-phase low-side emitter for phase current measurement, to be connected to VSS with a short connection.
21 V/VS(V) power_in V-phase output connected to the motor and the V-phase high-side floating supply offset, robust to -50 V transient.
22 NW passive W-phase low-side emitter for phase current measurement, to be connected to VSS with a short connection.
23 W/VS(W) passive W-phase output connected to the motor and the W-phase high-side floating supply offset, robust to -50 V transient.
24 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SOP-23
Category Triode/MOS Tube/Transistor
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic 1 input voltage (LIN, HIN) VIH 2.2 V 11
Logic 0 input voltage (LIN, HIN) VIL 0.8 V 11
ITRIP positive going threshold VIT, TH+ 475 500 525 mV 11
VDD and VBS UV positive going threshold VDDUV+, VBSUV+ 10.6 11.1 11.6 V 11
VDD and VBS UV negative going threshold VDDUV-, VBSUV- 10.4 10.9 11.4 V 11
Collector-emitter saturation voltage VCE(Sat) 1.41 1.62 V IC = 2 A, TJ = 25°C 11
Collector-emitter leakage current ICES 1 mA VCE = 600 V 11
Diode forward voltage VF 1.42 1.65 V IC = 2 A, TJ = 25°C 11
Quiescent VBS supply current IQBS 100 µA VHIN = 0 V 11
Quiescent VDD supply current IQDD 3 mA VLIN = 0 V, VHINX = 5 V 11
Input bias current LIN, HIN IIN+ 6.25 12.5 µA VIN = 5 V 11
Input bias current RFE IIN, RFE+ 1 µA VIN, RFE = 5 V 11
Input bias current ITRIP IITRIP+ 5 20 µA VITRIP = 5 V 11
RFE low on resistance RRFE 34 60 Ω 11
RFE low to six switch turn-off propagate delay tEN 430 ns VIN = 0 or 5 V, VRFE = 5 V 12
ITRIP low to six switch turn-off propagate delay tITRIP 1.3 µs VDC = 300 V, No cap. on RFE 12
Matching propagation delay time MT 50 ns External dead time > 500 ns 12
Single IGBT thermal resistance, junction-case RthJC 10.4 K/W Low-side V-phase 9
Single diode thermal resistance, junction-case RthJC, D 11.9 K/W 9
DC link supply voltage P-N VPN 0 300 400 V 10
Low-side supply voltage VDD 13.5 15 16.5 V 10
High-side floating supply voltage VBS 12.5 15 17.5 V VB vs. VS 10
Logic input voltages VIN 0 5 V LIN, HIN, ITRIP, RFE 10
External dead time DT 1 µs between HIN & LIN 10
Voltage between VSS - N VCOMP -5 5 V including surge 10
Minimum input pulse width PWIN(ON), PWIN(OFF) 1 µs 10
Storage temperature TSTG -40 125 °C 8
Operating case temperature TC -40 125 °C Refer to Figure 8 8
Operating junction temperature TJ -40 150 °C 8
Isolation voltage VISO 2000 V 1 min, RMS, f = 60 Hz 8
Maximum blocking voltage VCES 600 V IC = 250 µA 8
DC link supply voltage P-N VPN 450 V Applied between P - N 8
DC link supply voltage (surge) VPN(Surge) 500 V Applied between P - N 8
Collector current IC -6 6 A TC = 25°C, TJ < 150°C 8
Maximum peak collector current ICP -9 9 A TC = 25°C, TJ < 150°C, less than 1 ms 8
Power dissipation per IGBT Ptot 12 W 8
Short circuit withstand time tSC 3 µs VDD = 15 V, VDC ≤ 400 V, TJ ≤ 150°C 8
Module control supply voltage VDD -0.3 20 V Applied between VDD - VSS 8
High-side floating supply voltage VBS -0.3 20 V Applied between VB - VS 8
Input voltage (LIN, HIN, ITRIP, RFE) VIN -0.3 20 V 8
Mounting torque 0.4 0.6 0.8 N∙m M3 screw and washer with thermal grease 14
Backside curvature -50 50 µm Refer to Figure 9 14
NTC resistance at 25°C RNTC 47 kΩ TNTC = 25°C 13
NTC resistance at 125°C RNTC 1.269 1.384 1.505 kΩ TNTC = 125°C 13
NTC B-constant B (25/50) 4050 K 13
ITRIP negative going threshold VIT, TH- 430 mV 11
Bootstrap resistance RBS 200 Ω 11
Input filter time (HIN, LIN) tFIL, IN 300 ns VLIN, HIN = 0 V or 5 V 12

CAD (KiCad official)

  • Symbol: IM241L6S1BAUMA1
  • Footprint: Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm
  • 3D model: SOP-23 (KiCad packages3D, STEP)
  • 3D model files: im241l6s1bauma1-etched.step / im241l6s1bauma1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); im241l6s1bauma1.step / im241l6s1bauma1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (25 pp, sha256 ece90b29b4c56267, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF