3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIM241L6S1BAUMA1
Infineon Technologies · IGBTs · SOP-23
IM241L6S1BAUMA1 from Infineon Technologies, in a SOP-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Logic ground; the reference for the input logic. |
| 2 | VB(U) | power_in | U-phase high-side floating IC supply, VBS recommended 12.5 V to 17.5 V relative to VS, with undervoltage threshold typ. 11.1 V rising and 10.9 V falling. |
| 3 | VDD1 | power_in | Low-side control supply 1, recommended 13.5 V to 16.5 V (absolute max 20 V) referenced to VSS. |
| 4 | HIN(U) | input | U-phase high-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down. |
| 5 | LIN(U) | input | U-phase low-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down. |
| 6 | RFE | bidirectional | Combined RCIN programmable fault-clear timer, open-drain fault output and enable input, normally pulled to 3.3 V through an RC network; pulling it low disables the IPM. |
| 7 | VB(V) | power_in | V-phase high-side floating IC supply, VBS recommended 12.5 V to 17.5 V relative to VS, with undervoltage threshold typ. 11.1 V rising and 10.9 V falling. |
| 8 | VDD2 | power_in | Low-side control supply 2, recommended 13.5 V to 16.5 V (absolute max 20 V) referenced to VSS. |
| 9 | HIN(V) | input | V-phase high-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down. |
| 10 | LIN(V) | input | V-phase low-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down. |
| 11 | VTH | output | Direct access to the built-in NTC thermistor (47 kΩ typ. at 25°C) referenced to VSS, needing an external pull-up to VDD or +5 V. |
| 12 | VB(W) | power_in | W-phase high-side floating IC supply, VBS recommended 12.5 V to 17.5 V relative to VS, with undervoltage threshold typ. 11.1 V rising and 10.9 V falling. |
| 13 | VDD3 | power_in | Low-side control supply 3, recommended 13.5 V to 16.5 V (absolute max 20 V) referenced to VSS. |
| 14 | HIN(W) | input | W-phase high-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down. |
| 15 | LIN(W) | input | W-phase low-side gate driver input, positive logic, VIH min 2.2 V and VIL max 0.8 V, with about 800 kΩ internal pull-down. |
| 16 | ITRIP | input | Over-current shutdown input with positive-going threshold typ. 500 mV (475 to 525 mV) and a 500 ns input filter. |
| 17 | P | power_in | Positive bus input voltage for the high-side IGBTs, recommended up to 400 V (450 V max rating, 500 V surge). |
| 18 | U/VS(U) | passive | U-phase output connected to the motor and the U-phase high-side floating supply offset, robust to -50 V transient. |
| 19 | NU | passive | U-phase low-side emitter for phase current measurement, to be connected to VSS with a short connection. |
| 20 | NV | passive | V-phase low-side emitter for phase current measurement, to be connected to VSS with a short connection. |
| 21 | V/VS(V) | power_in | V-phase output connected to the motor and the V-phase high-side floating supply offset, robust to -50 V transient. |
| 22 | NW | passive | W-phase low-side emitter for phase current measurement, to be connected to VSS with a short connection. |
| 23 | W/VS(W) | passive | W-phase output connected to the motor and the W-phase high-side floating supply offset, robust to -50 V transient. |
| 24 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOP-23 |
| Category | Triode/MOS Tube/Transistor |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 input voltage (LIN, HIN) | VIH | 2.2 | V | 11 | |||
| Logic 0 input voltage (LIN, HIN) | VIL | 0.8 | V | 11 | |||
| ITRIP positive going threshold | VIT, TH+ | 475 | 500 | 525 | mV | 11 | |
| VDD and VBS UV positive going threshold | VDDUV+, VBSUV+ | 10.6 | 11.1 | 11.6 | V | 11 | |
| VDD and VBS UV negative going threshold | VDDUV-, VBSUV- | 10.4 | 10.9 | 11.4 | V | 11 | |
| Collector-emitter saturation voltage | VCE(Sat) | 1.41 | 1.62 | V | IC = 2 A, TJ = 25°C | 11 | |
| Collector-emitter leakage current | ICES | 1 | mA | VCE = 600 V | 11 | ||
| Diode forward voltage | VF | 1.42 | 1.65 | V | IC = 2 A, TJ = 25°C | 11 | |
| Quiescent VBS supply current | IQBS | 100 | µA | VHIN = 0 V | 11 | ||
| Quiescent VDD supply current | IQDD | 3 | mA | VLIN = 0 V, VHINX = 5 V | 11 | ||
| Input bias current LIN, HIN | IIN+ | 6.25 | 12.5 | µA | VIN = 5 V | 11 | |
| Input bias current RFE | IIN, RFE+ | 1 | µA | VIN, RFE = 5 V | 11 | ||
| Input bias current ITRIP | IITRIP+ | 5 | 20 | µA | VITRIP = 5 V | 11 | |
| RFE low on resistance | RRFE | 34 | 60 | Ω | 11 | ||
| RFE low to six switch turn-off propagate delay | tEN | 430 | ns | VIN = 0 or 5 V, VRFE = 5 V | 12 | ||
| ITRIP low to six switch turn-off propagate delay | tITRIP | 1.3 | µs | VDC = 300 V, No cap. on RFE | 12 | ||
| Matching propagation delay time | MT | 50 | ns | External dead time > 500 ns | 12 | ||
| Single IGBT thermal resistance, junction-case | RthJC | 10.4 | K/W | Low-side V-phase | 9 | ||
| Single diode thermal resistance, junction-case | RthJC, D | 11.9 | K/W | 9 | |||
| DC link supply voltage P-N | VPN | 0 | 300 | 400 | V | 10 | |
| Low-side supply voltage | VDD | 13.5 | 15 | 16.5 | V | 10 | |
| High-side floating supply voltage | VBS | 12.5 | 15 | 17.5 | V | VB vs. VS | 10 |
| Logic input voltages | VIN | 0 | 5 | V | LIN, HIN, ITRIP, RFE | 10 | |
| External dead time | DT | 1 | µs | between HIN & LIN | 10 | ||
| Voltage between VSS - N | VCOMP | -5 | 5 | V | including surge | 10 | |
| Minimum input pulse width | PWIN(ON), PWIN(OFF) | 1 | µs | 10 | |||
| Storage temperature | TSTG | -40 | 125 | °C | 8 | ||
| Operating case temperature | TC | -40 | 125 | °C | Refer to Figure 8 | 8 | |
| Operating junction temperature | TJ | -40 | 150 | °C | 8 | ||
| Isolation voltage | VISO | 2000 | V | 1 min, RMS, f = 60 Hz | 8 | ||
| Maximum blocking voltage | VCES | 600 | V | IC = 250 µA | 8 | ||
| DC link supply voltage P-N | VPN | 450 | V | Applied between P - N | 8 | ||
| DC link supply voltage (surge) | VPN(Surge) | 500 | V | Applied between P - N | 8 | ||
| Collector current | IC | -6 | 6 | A | TC = 25°C, TJ < 150°C | 8 | |
| Maximum peak collector current | ICP | -9 | 9 | A | TC = 25°C, TJ < 150°C, less than 1 ms | 8 | |
| Power dissipation per IGBT | Ptot | 12 | W | 8 | |||
| Short circuit withstand time | tSC | 3 | µs | VDD = 15 V, VDC ≤ 400 V, TJ ≤ 150°C | 8 | ||
| Module control supply voltage | VDD | -0.3 | 20 | V | Applied between VDD - VSS | 8 | |
| High-side floating supply voltage | VBS | -0.3 | 20 | V | Applied between VB - VS | 8 | |
| Input voltage (LIN, HIN, ITRIP, RFE) | VIN | -0.3 | 20 | V | 8 | ||
| Mounting torque | 0.4 | 0.6 | 0.8 | N∙m | M3 screw and washer with thermal grease | 14 | |
| Backside curvature | -50 | 50 | µm | Refer to Figure 9 | 14 | ||
| NTC resistance at 25°C | RNTC | 47 | kΩ | TNTC = 25°C | 13 | ||
| NTC resistance at 125°C | RNTC | 1.269 | 1.384 | 1.505 | kΩ | TNTC = 125°C | 13 |
| NTC B-constant | B (25/50) | 4050 | K | 13 | |||
| ITRIP negative going threshold | VIT, TH- | 430 | mV | 11 | |||
| Bootstrap resistance | RBS | 200 | Ω | 11 | |||
| Input filter time (HIN, LIN) | tFIL, IN | 300 | ns | VLIN, HIN = 0 V or 5 V | 12 |
CAD (KiCad official)
- Symbol:
IM241L6S1BAUMA1 - Footprint:
Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm - 3D model: SOP-23 (KiCad packages3D, STEP)
- 3D model files:
im241l6s1bauma1-etched.step/im241l6s1bauma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);im241l6s1bauma1.step/im241l6s1bauma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (25 pp, sha256
ece90b29b4c56267, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).