component
IKCM15H60GA
Public Made by Adomby adom
Infineon Technologies Motor Driver ICs, DIP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289
{
"slug": "ikcm15h60ga",
"version": "0.1.0",
"type": "component",
"description": "Infineon Technologies Motor Driver ICs, DIP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"ikcm15h60ga",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ikcm15h60ga.kicad_sym",
"ikcm15h60ga.kicad_mod",
"ikcm15h60ga.glb",
"ikcm15h60ga.step",
"ikcm15h60ga.lbr",
"docs/hero.png",
"docs/ikcm15h60ga-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ikcm15h60ga-hero.glb",
"ikcm15h60ga-hero.overlay.json",
"ikcm15h60ga-etched.glb"
],
"component": {
"mpn": "IKCM15H60GA",
"manufacturer": "Infineon Technologies",
"package": "DIP-24",
"pin_count": 24,
"category": "Power Management ICs",
"subcategory": "Motor Driver ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/4f00803cf27501e80cd7726aa7858e91.pdf",
"parts": {
"symbol": "ikcm15h60ga.kicad_sym",
"footprint": "ikcm15h60ga.kicad_mod",
"model_3d": "ikcm15h60ga-hero.glb",
"model_3d_plain": "ikcm15h60ga-etched.glb",
"model_3d_step": "ikcm15h60ga-etched.step",
"model_3d_step_plain": "ikcm15h60ga.step",
"lbr": "ikcm15h60ga.lbr"
},
"distributor_links": {
"lcsc": "C536157",
"mouser": "641-IKCM15H60GA"
},
"distributor_check": {
"checked_at": "2026-11-02T17:32:09Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": "641-IKCM15H60GA",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VS(U)",
"type": "power_in",
"description": "U-phase high side floating IC supply offset voltage, which the datasheet says withstands negative voltage of -50V transiently relative to VSS."
},
{
"number": "2",
"name": "VB(U)",
"type": "power_in",
"description": "U-phase high side floating IC supply voltage, with a recommended VBS range of 13.5V to 18.5V referenced to VS."
},
{
"number": "3",
"name": "VS(V)",
"type": "power_in",
"description": "V-phase high side floating IC supply offset voltage, which the datasheet says withstands negative voltage of -50V transiently relative to VSS."
},
{
"number": "4",
"name": "VB(V)",
"type": "power_in",
"description": "V-phase high side floating IC supply voltage, with a recommended VBS range of 13.5V to 18.5V referenced to VS."
},
{
"number": "5",
"name": "VS(W)",
"type": "power_in",
"description": "W-phase high side floating IC supply offset voltage, which the datasheet says withstands negative voltage of -50V transiently relative to VSS."
},
{
"number": "6",
"name": "VB(W)",
"type": "power_in",
"description": "W-phase high side floating IC supply voltage, with a recommended VBS range of 13.5V to 18.5V referenced to VS."
},
{
"number": "7",
"name": "HIN(U)",
"type": "input",
"description": "U-phase high side gate driver input with positive logic, LSTTL and CMOS compatible down to 3.3V outputs, and a 5V maximum recommended input voltage."
},
{
"number": "8",
"name": "HIN(V)",
"type": "input",
"description": "V-phase high side gate driver input with positive logic, LSTTL and CMOS compatible down to 3.3V outputs, and a 5V maximum recommended input voltage."
},
{
"number": "9",
"name": "HIN(W)",
"type": "input",
"description": "W-phase high side gate driver input with positive logic, LSTTL and CMOS compatible down to 3.3V outputs, and a 5V maximum recommended input voltage."
},
{
"number": "10",
"name": "LIN(U)",
"type": "input",
"description": "U-phase low side gate driver input with positive logic, LSTTL and CMOS compatible down to 3.3V outputs, and a 5V maximum recommended input voltage."
},
{
"number": "11",
"name": "LIN(V)",
"type": "input",
"description": "V-phase low side gate driver input with positive logic, LSTTL and CMOS compatible down to 3.3V outputs, and a 5V maximum recommended input voltage."
},
{
"number": "12",
"name": "LIN(W)",
"type": "input",
"description": "W-phase low side gate driver input with positive logic, LSTTL and CMOS compatible down to 3.3V outputs, and a 5V maximum recommended input voltage."
},
{
"number": "13",
"name": "VDD",
"type": "power_in",
"description": "Low side control supply powering both the input logic and the output power stage, with a recommended range of 14.5V to 18.5V and under-voltage shutdown below 10.4V typical."
},
{
"number": "14",
"name": "VFO",
"type": "output",
"description": "Fault output and direct NTC temperature monitor that is open drain and requires an external pull-up resistor, indicating under-voltage at VDD or an ITRIP over-current trip."
},
{
"number": "15",
"name": "ITRIP",
"type": "input",
"description": "Over current shutdown input with a comparator threshold of typ. 0.47V referenced to VSS, a 0 to 5V recommended input range and a typical 530ns input noise filter."
},
{
"number": "16",
"name": "VSS",
"type": "power_in",
"description": "Low side control negative supply and logic reference, with VSS to N voltage limited to -5V to 5V including surge."
},
{
"number": "17",
"name": "NW",
"type": "passive",
"description": "W-phase low side emitter made available for phase current measurement, to be kept as short as possible to VSS."
},
{
"number": "18",
"name": "NV",
"type": "passive",
"description": "V-phase low side emitter made available for phase current measurement, to be kept as short as possible to VSS."
},
{
"number": "19",
"name": "NU",
"type": "passive",
"description": "U-phase low side emitter made available for phase current measurement, to be kept as short as possible to VSS."
},
{
"number": "20",
"name": "W",
"type": "output",
"description": "Motor W-phase output connected to the high side emitter and low side collector of the W leg, rated for up to 15A output current."
},
{
"number": "21",
"name": "V",
"type": "power_in",
"description": "Motor V-phase output connected to the high side emitter and low side collector of the V leg, rated for up to 15A output current."
},
{
"number": "22",
"name": "U",
"type": "output",
"description": "Motor U-phase output connected to the high side emitter and low side collector of the U leg, rated for up to 15A output current."
},
{
"number": "23",
"name": "P",
"type": "power_in",
"description": "Positive DC bus input to the high side IGBTs, with the datasheet stating the bus voltage must not exceed 450V (VPN maximum)."
},
{
"number": "24",
"name": "NC",
"type": "unconnected",
"description": "No connection; the datasheet specifies this pin is not connected internally."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet text describes a 24-pin Dual In-Line molded module but never prints the designation DI"
],
"pages_sent": 17,
"cost_usd": 0.0266,
"at": "2026-11-02T17:31:54"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/4f00803cf27501e80cd7726aa7858e91.pdf",
"pages": 17,
"sha256": "6bc4fa980fdababb",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 24,
"described": 24,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ikcm15h60ga.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
31.75,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "305ecc33779421c4eaa38993d80432e50eb6e02cae0807055a4a07ffcb2f0d2b",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ikcm15h60ga-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
31.75,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "565b7ab28752ba8b659737c576711183b6efd67f95c8f72ef7ea8655de4b99cd",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}