Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IKCM10L60GA

Infineon Technologies · Intelligent Power Modules (IPM) · DIP-24

IKCM10L60GA from Infineon Technologies, in a DIP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS(U) power_in U-phase high side floating IC supply offset voltage, robust against -50V transient negative voltage with respect to VSS.
2 VB(U) power_in U-phase high side floating IC supply voltage, supplied by integrated bootstrap circuit with VBS recommended 13.5V to 18.5V.
3 VS(V) power_in V-phase high side floating IC supply offset voltage, robust against -50V transient negative voltage with respect to VSS.
4 VB(V) power_in V-phase high side floating IC supply voltage, supplied by integrated bootstrap circuit with VBS recommended 13.5V to 18.5V.
5 VS(W) power_in W-phase high side floating IC supply offset voltage, robust against -50V transient negative voltage with respect to VSS.
6 VB(W) power_in W-phase high side floating IC supply voltage, supplied by integrated bootstrap circuit with VBS recommended 13.5V to 18.5V.
7 HIN(U) input U-phase high side gate driver input, positive logic, Schmitt-trigger with internal ~5k pull-down, LSTTL/CMOS compatible down to 3.3V.
8 HIN(V) input V-phase high side gate driver input, positive logic, Schmitt-trigger with internal ~5k pull-down, LSTTL/CMOS compatible down to 3.3V.
9 HIN(W) input W-phase high side gate driver input, positive logic, Schmitt-trigger with internal ~5k pull-down, LSTTL/CMOS compatible down to 3.3V.
10 LIN(U) input U-phase low side gate driver input, positive logic, Schmitt-trigger with internal ~5k pull-down, input pulse width not recommended below 1µs.
11 LIN(V) input V-phase low side gate driver input, positive logic, Schmitt-trigger with internal ~5k pull-down, input pulse width not recommended below 1µs.
12 LIN(W) input W-phase low side gate driver input, positive logic, Schmitt-trigger with internal ~5k pull-down, input pulse width not recommended below 1µs.
13 VDD power_in Low side control supply powering input logic and output stage, recommended 14.0V to 18.5V (typ 16V), UV lockout at typ 10.4V falling.
14 VFO bidirectional Open-drain fault output indicating VDD undervoltage or ITRIP overcurrent, also gives direct access to the NTC thermistor referenced to VSS, requires external pull-up.
15 ITRIP input Over current shutdown input with typ 0.47V comparator threshold referenced to VSS, typ 530ns noise filter, shuts down all outputs.
16 VSS power_in Low side control negative supply and ground reference for input logic, VSS to N within ±5V including surge.
17 NW passive W-phase low side IGBT emitter (open emitter) available for phase current measurement, keep connection to VSS short.
18 NV passive V-phase low side IGBT emitter (open emitter) available for phase current measurement, keep connection to VSS short.
19 NU passive U-phase low side IGBT emitter (open emitter) available for phase current measurement, keep connection to VSS short.
20 W passive Motor W-phase output, high side emitter and low side collector.
21 V power_in Motor V-phase output, high side emitter and low side collector.
22 U passive Motor U-phase output, high side emitter and low side collector.
23 P power_in Positive bus input voltage connected to high side IGBTs, bus voltage must not exceed 450V.
24 NC unconnected No connection.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package DIP-24
Category Triode/MOS Tube/Transistor
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature range Tstg -40 125 °C 7
Isolation test voltage VISOL 2000 V RMS, f = 60Hz, t = 1min 7
Operating case temperature range TC -40 125 °C Refer to Figure 6 7
Max. blocking voltage VCES 600 V IC = 250µA 7
DC link supply voltage of P-N VPN 450 V Applied between P-N 7
DC link supply voltage (surge) of P-N VPN(surge) 500 V Applied between P-N 7
Output current IC -10 10 A TC = 25°C, TJ < 150°C 7
Output current IC -6 6 A TC = 80°C, TJ < 150°C 7
Maximum peak output current IC(peak) -20 20 A less than 1ms 7
Short circuit withstand time tSC 5 µs VDC ≤ 400V, TJ = 150°C 7
Power dissipation per IGBT Ptot 25.2 W 7
Operating junction temperature range TJ -40 150 °C 7
Single IGBT thermal resistance, junction-case RthJC 4.96 K/W 7
Single diode thermal resistance, junction-case RthJCD 6.88 K/W 7
Module supply voltage VDD -1 20 V 7
High side floating supply voltage (VB vs. VS) VBS -1 20 V 7
Input voltage LIN, HIN VIN -1 10 V 7
Input voltage ITRIP VITRIP -1 10 V 7
Switching frequency fPWM 20 kHz 7
DC link supply voltage of P-N VPN 0 400 V 8
High side floating supply voltage (VB vs. VS) VBS 13.5 18.5 V 8
Low side supply voltage VDD 14 16 18.5 V 8
Control supply variation ΔVBS, ΔVDD -1 1 V/µs 8
Logic input voltages LIN, HIN VIN 0 5 V 8
Logic input voltage ITRIP VITRIP 0 5 V 8
Between VSS - N (including surge) VSS -5 5 V 8
Collector-Emitter saturation voltage VCE(sat) 1.55 2.05 V IC = 6A, TJ = 25°C 9
Collector-Emitter saturation voltage VCE(sat) 1.85 V IC = 6A, TJ = 150°C 9
Diode forward voltage VF 1.75 2.5 V IF= 6A, TJ = 25°C 9
Diode forward voltage VF 1.78 V IF= 6A, TJ = 150°C 9
Collector-Emitter leakage current ICES 1 mA VCE = 600V 9
Logic "1" input voltage (LIN, HIN) VIH 2.1 2.5 V 9
Logic "0" input voltage (LIN, HIN) VIL 0.7 0.9 V 9
ITRIP positive going threshold VIT,TH+ 400 470 540 mV 9
ITRIP input hysteresis VIT,HYS 40 70 mV 9
VDD and VBS supply under voltage positive going threshold VDDUV+, VBSUV+ 10.8 12.1 13 V 9
VDD and VBS supply under voltage negative going threshold VDDUV-, VBSUV- 9.5 10.4 11.2 V 9
VDD and VBS supply under voltage lockout hysteresis VDDUVH, VBSUVH 1 1.7 V 9
Input clamp voltage (HIN, LIN, ITRIP) VINCLAMP 9 10.1 12.5 V Iin=4mA 9
Quiescent VBx supply current IQBS 300 500 µA VBx only, HIN = 0V 9
Quiescent VDD supply current IQDD 370 900 µA VDD only, LIN = 0V, HINX = 5V 9
Input bias current IIN+ 1 1.5 mA VIN = 5V 9
ITRIP input bias current IITRIP+ 65 150 µA VITRIP = 5V 9
Fault clear time after ITRIP-fault tFLTCLR 40 65 200 µs VITRIP = 1V 10
Deadtime between low side and high side DTPWM 1 µs 10
Repetitive peak reverse voltage VRRM 600 V 10
Mounting torque 0.59 0.69 0.78 Nm M3 screw and washer 11
Flatness -50 100 µm Refer to Figure 8 11
Input bias current IIN- 2 µA VIN = 0V 9
VFO input bias current IFO 60 µA VFO = 5V, VITRIP = 0V 9
VFO output voltage VFO 0.5 V IFO = 10mA, VITRIP = 1V 9
Thermistor resistance RNTC 85 kΩ TNTC = 25°C 11
B-constant of NTC B(25/100) 4092 K 11

CAD (KiCad official)

  • Symbol: IKCM10L60GA
  • Footprint: Package_DIP:DIP-24_W7.62mm
  • 3D model: DIP-24 (KiCad packages3D, STEP)
  • 3D model files: ikcm10l60ga-etched.step / ikcm10l60ga-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ikcm10l60ga.step / ikcm10l60ga.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (17 pp, sha256 1b145c0a67eb3494, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF