main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers iim-42652: viewers · Ray
iim-42652-etched.glb iim-42652: factory component page (tier=mfr) · Ray
iim-42652-etched.step iim-42652: factory component page (tier=mfr) · Ray
iim-42652-hero.glb iim-42652: hero GLB from the etched model (keeps the MPN mark) · Ray
iim-42652-hero.overlay.json iim-42652: hero GLB from the etched model (keeps the MPN mark) · Ray
iim-42652.glb Publish 0.1.0 · Ray
iim-42652.kicad_mod Publish 0.1.0 · Ray
iim-42652.kicad_sym Publish 0.1.0 · Ray
iim-42652.lbr Publish 0.1.0 · Ray
iim-42652.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

IIM-42652

TDK · Accelerometers · LGA-14(2.5x3)

IIM-42652 from TDK, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AP_SDO / AP_AD0 bidirectional AP_SDO is the AP SPI serial data output (4-wire mode) and AP_AD0 is the AP I3C/I2C slave address LSB; pull-up/pull-down disabled by default, enabled via PIN1_PU_EN / PIN1_PD_EN (register 0x0Eh, Bank 3), never both at once.
2 RESV unconnected Reserved: no connect or connect to GND; pull-up disabled by default and can be enabled with PIN2_PU_EN (register 0x06h, Bank 3).
3 RESV unconnected Reserved: no connect or connect to GND; pull-up disabled by default and can be enabled with PIN3_PU_EN (register 0x06h, Bank 3).
4 INT1 / INT output INT1 is Interrupt 1 (push-pull or open drain) and INT carries all interrupts mapped to pin 4; pull-down disabled by default, enabled with PIN4_PD_EN (register 0x06h, Bank 3).
5 VDDIO power_in IO power supply voltage, operating range 1.71V to 3.6V, with a 10 nF X7R bypass capacitor (C3).
6 GND power_in Power supply ground.
7 RESV passive Reserved: connect to GND; pull-up disabled by default and can be enabled/disabled with PIN7_PU_EN (register 0x06h, Bank 3).
8 VDD power_in Power supply voltage, operating range 1.71V to 3.6V, with 0.1 µF (C1) and 2.2 µF (C2) X7R bypass capacitors.
9 INT2 / FSYNC / CLKIN bidirectional INT2 is Interrupt 2 (push-pull or open drain), FSYNC is the frame sync input (connect to GND if not used), CLKIN is the external clock input (31 kHz to 50 kHz); pull-down disabled by default, enabled with PIN9_PD_EN (register 0x06h, Bank 3).
10 RESV unconnected Reserved: no connect or connect to GND; pull-up enabled by default and controlled by PIN10_PU_EN (register 0x06h, Bank 3).
11 RESV unconnected Reserved: no connect or connect to GND; pull-up enabled by default and controlled by PIN11_PU_EN (register 0x06h, Bank 3).
12 AP_CS input AP SPI chip select (SPI interface); connect to VDDIO if using the AP I3C/I2C interface; pull-up enabled by default, controlled by PIN12_PU_EN / PIN12_PD_EN (register 0x0Eh, Bank 3).
13 AP_SCL / AP_SCLK input AP_SCL is the AP I3C/I2C serial clock and AP_SCLK is the AP SPI serial clock; pull-up/pull-down disabled by default, controlled by PIN13_PU_EN / PIN13_PD_EN (register 0x0Eh, Bank 3).
14 AP_SDA / AP_SDIO / AP_SDI bidirectional AP_SDA is the AP I3C/I2C serial data, AP_SDIO is SPI serial data I/O (3-wire mode) and AP_SDI is SPI serial data input (4-wire mode); pull-up/pull-down disabled by default, controlled by PIN14_PU_EN / PIN14_PD_EN (register 0x0Eh, Bank 3).

Key specifications

Parameter Value
Manufacturer TDK
Package LGA-14(2.5x3)
Category Sensors
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD VDD 1.71 1.8 3.6 V 13
Supply Voltage VDDIO VDDIO 1.71 1.8 3.6 V 13
Specified Temperature Range -40 105 °C Performance parameters are not applicable beyond Specified Temperature Range 13
Gyro Sensitivity Scale Factor Initial Tolerance -0.5 0.5 % 25°C 11
Gyro Sensitivity Scale Factor Variation Over Temperature -0.005 0.005 %/ºC -40°C to +105°C 11
Gyro Nonlinearity -0.1 0.1 % Best fit straight line; 25°C 11
Gyro Cross-Axis Sensitivity -1.25 1.25 % 11
Initial ZRO Tolerance -0.5 0.5 º/s Board-level, 25°C 11
ZRO Variation vs. Temperature -0.02 0.02 º/s/ºC -40°C to +105°C 11
Gyroscope Mechanical Frequencies 25 27 29 KHz 11
Accel Sensitivity Scale Factor Initial Tolerance -0.5 0.5 % Component-level 12
Accel Sensitivity Change vs. Temperature -0.005 0.005 %/ºC -40°C to +105°C 12
Accel Nonlinearity -0.1 0.1 % Best Fit Straight Line, ±2g 12
Accel Cross-Axis Sensitivity -1 1 % 12
Accel Zero-G Initial Tolerance -20 20 mg Board-level, all axes 12
Zero-G Level Change vs. Temperature -0.15 0.15 mg/ºC -40°C to +105°C 12
Supply Ramp Time 0.01 3 ms Monotonic ramp. Ramp rate is 10% to 90% of the final value 14
Temperature Sensor Operating Range -40 105 °C Ambient 14
Room Temperature Offset -5 5 °C 25°C 14
Temperature Sensor ODR With Filter 25 8000 Hz 14
INT Pulse Width tINT 8 100 µs int_tpulse_duration= 0, 1 (100us, 8us ) 14
Internal Clock Initial Tolerance -3 3 % CLKSEL=`2b00 or gyro inactive; 25°C 14
Internal Clock Initial Tolerance (gyro active) -1.5 1.5 % CLK_SEL=`2b01 and gyro active; 25°C 14
Internal Clock Variation over Temperature -3 3 % CLK_SEL=`2b00 or gyro inactive; -40°C to +85°C 14
Internal Clock Variation over Temperature (gyro active) -2 2 % CLK_SEL=`2b01 and gyro active; -40oC to +85oC 14
I2C Output Low Voltage VOL 0 0.4 V 3 mA sink current 14
INT Low-Level Output Voltage VOL.INT 0.1 V OPEN=1, 0.3 mA sink Current 14
Output Fall Time tof 300 ns Cb bus capacitance in pf 14
Input Capacitance CI 10 pF 14
Input Leakage Current 100 nA 14
Power Supply Noise 10 mV peak-peak Up to 10 kHz 14
Start-up time for register read/write 1 ms From power-up 14
Gyroscope Start-Up Time 30 ms Time from gyro enable to gyro drive ready 11
Accelerometer Startup Time 10 ms From sleep mode to valid data 12
I2C SCL Clock Frequency fSCL 1 MHz 15
SPI SCLK Clock Frequency fSPC 24 MHz Default 16
RTC Clock Frequency FRTC 31 32 50 kHz Default 18
Supply Current, 6-Axis Gyro + Accel, Low-Noise Mode 0.67 mA Low-Noise Mode 13
Supply Current, 3-Axis Accelerometer, Low-Noise Mode 0.28 mA Low-Noise Mode 13
Supply Current, 3-Axis Gyroscope, Low-Noise Mode 0.58 mA Low-Noise Mode 13
Full-Chip Sleep Mode Current 7.5 µA At 25°C 13
Gyro Rate Noise Spectral Density 0.0038 º/s /√Hz @ 10 Hz 11
Accel Power Spectral Density 70 µg/√Hz @ 10 Hz 12
Supply Voltage VDD abs max VDD -0.5 4 V 19
Supply Voltage VDDIO abs max VDDIO -0.5 4 V 19
Operating Temperature Range -40 105 °C 19
Storage Temperature Range -40 125 °C 19
ESD HBM 2 kV HBM 19
ESD CDM 500 V CDM 19

CAD (KiCad official)

  • Symbol: IIM-42652
  • Footprint: Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm
  • 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
  • 3D model files: iim-42652-etched.step / iim-42652-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iim-42652.step / iim-42652.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TDK datasheet (120 pp, sha256 f66d4a6372bcf518, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF