3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIIM-42652
TDK · Accelerometers · LGA-14(2.5x3)
IIM-42652 from TDK, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AP_SDO / AP_AD0 | bidirectional | AP_SDO is the AP SPI serial data output (4-wire mode) and AP_AD0 is the AP I3C/I2C slave address LSB; pull-up/pull-down disabled by default, enabled via PIN1_PU_EN / PIN1_PD_EN (register 0x0Eh, Bank 3), never both at once. |
| 2 | RESV | unconnected | Reserved: no connect or connect to GND; pull-up disabled by default and can be enabled with PIN2_PU_EN (register 0x06h, Bank 3). |
| 3 | RESV | unconnected | Reserved: no connect or connect to GND; pull-up disabled by default and can be enabled with PIN3_PU_EN (register 0x06h, Bank 3). |
| 4 | INT1 / INT | output | INT1 is Interrupt 1 (push-pull or open drain) and INT carries all interrupts mapped to pin 4; pull-down disabled by default, enabled with PIN4_PD_EN (register 0x06h, Bank 3). |
| 5 | VDDIO | power_in | IO power supply voltage, operating range 1.71V to 3.6V, with a 10 nF X7R bypass capacitor (C3). |
| 6 | GND | power_in | Power supply ground. |
| 7 | RESV | passive | Reserved: connect to GND; pull-up disabled by default and can be enabled/disabled with PIN7_PU_EN (register 0x06h, Bank 3). |
| 8 | VDD | power_in | Power supply voltage, operating range 1.71V to 3.6V, with 0.1 µF (C1) and 2.2 µF (C2) X7R bypass capacitors. |
| 9 | INT2 / FSYNC / CLKIN | bidirectional | INT2 is Interrupt 2 (push-pull or open drain), FSYNC is the frame sync input (connect to GND if not used), CLKIN is the external clock input (31 kHz to 50 kHz); pull-down disabled by default, enabled with PIN9_PD_EN (register 0x06h, Bank 3). |
| 10 | RESV | unconnected | Reserved: no connect or connect to GND; pull-up enabled by default and controlled by PIN10_PU_EN (register 0x06h, Bank 3). |
| 11 | RESV | unconnected | Reserved: no connect or connect to GND; pull-up enabled by default and controlled by PIN11_PU_EN (register 0x06h, Bank 3). |
| 12 | AP_CS | input | AP SPI chip select (SPI interface); connect to VDDIO if using the AP I3C/I2C interface; pull-up enabled by default, controlled by PIN12_PU_EN / PIN12_PD_EN (register 0x0Eh, Bank 3). |
| 13 | AP_SCL / AP_SCLK | input | AP_SCL is the AP I3C/I2C serial clock and AP_SCLK is the AP SPI serial clock; pull-up/pull-down disabled by default, controlled by PIN13_PU_EN / PIN13_PD_EN (register 0x0Eh, Bank 3). |
| 14 | AP_SDA / AP_SDIO / AP_SDI | bidirectional | AP_SDA is the AP I3C/I2C serial data, AP_SDIO is SPI serial data I/O (3-wire mode) and AP_SDI is SPI serial data input (4-wire mode); pull-up/pull-down disabled by default, controlled by PIN14_PU_EN / PIN14_PD_EN (register 0x0Eh, Bank 3). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TDK |
| Package | LGA-14(2.5x3) |
| Category | Sensors |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage VDD | VDD | 1.71 | 1.8 | 3.6 | V | 13 | |
| Supply Voltage VDDIO | VDDIO | 1.71 | 1.8 | 3.6 | V | 13 | |
| Specified Temperature Range | -40 | 105 | °C | Performance parameters are not applicable beyond Specified Temperature Range | 13 | ||
| Gyro Sensitivity Scale Factor Initial Tolerance | -0.5 | 0.5 | % | 25°C | 11 | ||
| Gyro Sensitivity Scale Factor Variation Over Temperature | -0.005 | 0.005 | %/ºC | -40°C to +105°C | 11 | ||
| Gyro Nonlinearity | -0.1 | 0.1 | % | Best fit straight line; 25°C | 11 | ||
| Gyro Cross-Axis Sensitivity | -1.25 | 1.25 | % | 11 | |||
| Initial ZRO Tolerance | -0.5 | 0.5 | º/s | Board-level, 25°C | 11 | ||
| ZRO Variation vs. Temperature | -0.02 | 0.02 | º/s/ºC | -40°C to +105°C | 11 | ||
| Gyroscope Mechanical Frequencies | 25 | 27 | 29 | KHz | 11 | ||
| Accel Sensitivity Scale Factor Initial Tolerance | -0.5 | 0.5 | % | Component-level | 12 | ||
| Accel Sensitivity Change vs. Temperature | -0.005 | 0.005 | %/ºC | -40°C to +105°C | 12 | ||
| Accel Nonlinearity | -0.1 | 0.1 | % | Best Fit Straight Line, ±2g | 12 | ||
| Accel Cross-Axis Sensitivity | -1 | 1 | % | 12 | |||
| Accel Zero-G Initial Tolerance | -20 | 20 | mg | Board-level, all axes | 12 | ||
| Zero-G Level Change vs. Temperature | -0.15 | 0.15 | mg/ºC | -40°C to +105°C | 12 | ||
| Supply Ramp Time | 0.01 | 3 | ms | Monotonic ramp. Ramp rate is 10% to 90% of the final value | 14 | ||
| Temperature Sensor Operating Range | -40 | 105 | °C | Ambient | 14 | ||
| Room Temperature Offset | -5 | 5 | °C | 25°C | 14 | ||
| Temperature Sensor ODR With Filter | 25 | 8000 | Hz | 14 | |||
| INT Pulse Width | tINT | 8 | 100 | µs | int_tpulse_duration= 0, 1 (100us, 8us ) | 14 | |
| Internal Clock Initial Tolerance | -3 | 3 | % | CLKSEL=`2b00 or gyro inactive; 25°C | 14 | ||
| Internal Clock Initial Tolerance (gyro active) | -1.5 | 1.5 | % | CLK_SEL=`2b01 and gyro active; 25°C | 14 | ||
| Internal Clock Variation over Temperature | -3 | 3 | % | CLK_SEL=`2b00 or gyro inactive; -40°C to +85°C | 14 | ||
| Internal Clock Variation over Temperature (gyro active) | -2 | 2 | % | CLK_SEL=`2b01 and gyro active; -40oC to +85oC | 14 | ||
| I2C Output Low Voltage | VOL | 0 | 0.4 | V | 3 mA sink current | 14 | |
| INT Low-Level Output Voltage | VOL.INT | 0.1 | V | OPEN=1, 0.3 mA sink Current | 14 | ||
| Output Fall Time | tof | 300 | ns | Cb bus capacitance in pf | 14 | ||
| Input Capacitance | CI | 10 | pF | 14 | |||
| Input Leakage Current | 100 | nA | 14 | ||||
| Power Supply Noise | 10 | mV peak-peak | Up to 10 kHz | 14 | |||
| Start-up time for register read/write | 1 | ms | From power-up | 14 | |||
| Gyroscope Start-Up Time | 30 | ms | Time from gyro enable to gyro drive ready | 11 | |||
| Accelerometer Startup Time | 10 | ms | From sleep mode to valid data | 12 | |||
| I2C SCL Clock Frequency | fSCL | 1 | MHz | 15 | |||
| SPI SCLK Clock Frequency | fSPC | 24 | MHz | Default | 16 | ||
| RTC Clock Frequency | FRTC | 31 | 32 | 50 | kHz | Default | 18 |
| Supply Current, 6-Axis Gyro + Accel, Low-Noise Mode | 0.67 | mA | Low-Noise Mode | 13 | |||
| Supply Current, 3-Axis Accelerometer, Low-Noise Mode | 0.28 | mA | Low-Noise Mode | 13 | |||
| Supply Current, 3-Axis Gyroscope, Low-Noise Mode | 0.58 | mA | Low-Noise Mode | 13 | |||
| Full-Chip Sleep Mode Current | 7.5 | µA | At 25°C | 13 | |||
| Gyro Rate Noise Spectral Density | 0.0038 | º/s /√Hz | @ 10 Hz | 11 | |||
| Accel Power Spectral Density | 70 | µg/√Hz | @ 10 Hz | 12 | |||
| Supply Voltage VDD abs max | VDD | -0.5 | 4 | V | 19 | ||
| Supply Voltage VDDIO abs max | VDDIO | -0.5 | 4 | V | 19 | ||
| Operating Temperature Range | -40 | 105 | °C | 19 | |||
| Storage Temperature Range | -40 | 125 | °C | 19 | |||
| ESD HBM | 2 | kV | HBM | 19 | |||
| ESD CDM | 500 | V | CDM | 19 |
CAD (KiCad official)
- Symbol:
IIM-42652 - Footprint:
Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm - 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
- 3D model files:
iim-42652-etched.step/iim-42652-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iim-42652.step/iim-42652.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TDK datasheet (120 pp, sha256
f66d4a6372bcf518, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).