main
Ray
Publish 0.1.0
39486fc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226
{
"slug": "icm7555n",
"version": "0.1.0",
"type": "component",
"description": "HGSEMI Timers / Counters, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"clock-timing",
"icm7555n",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"icm7555n.kicad_sym",
"icm7555n.kicad_mod",
"icm7555n.glb",
"icm7555n.step",
"icm7555n.lbr",
"docs/hero.png",
"docs/icm7555n-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"icm7555n-hero.glb",
"icm7555n-hero.overlay.json",
"icm7555n-etched.glb"
],
"component": {
"mpn": "ICM7555N",
"manufacturer": "HGSEMI",
"package": "DIP-8",
"pin_count": 8,
"category": "Clock/Timing",
"subcategory": "Timers / Counters",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ec2ce94f7f6446de35076e3d51997e7e.pdf",
"parts": {
"symbol": "icm7555n.kicad_sym",
"footprint": "icm7555n.kicad_mod",
"model_3d": "icm7555n-hero.glb",
"model_3d_plain": "icm7555n-etched.glb",
"model_3d_step": "icm7555n-etched.step",
"model_3d_step_plain": "icm7555n.step",
"lbr": "icm7555n.lbr"
},
"distributor_links": {
"lcsc": "C7432184"
},
"distributor_check": {
"checked_at": "2026-11-05T04:24:40Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground pin; all voltages are measured relative to this pin unless otherwise specified."
},
{
"number": "2",
"name": "TRIGGER",
"type": "input",
"description": "Trigger input; output goes high and the discharge switch turns off when the trigger voltage falls below 1/3 VCC (trigger current 10 pA max at VCC=5V)."
},
{
"number": "3",
"name": "OUTPUT",
"type": "output",
"description": "Timer output, compatible with TTL and CMOS logic at 5V (VOL 0.4V max at 3.2mA sink, VOH 4.0V min at -2mA source at VCC=5V)."
},
{
"number": "4",
"name": "RESET",
"type": "input",
"description": "Active-low reset input; a low level forces the output low and turns the discharge switch on (reset voltage 0.4V min, 0.7V typ, 1.2V max at VCC=5V)."
},
{
"number": "5",
"name": "CONTROL VOLTAGE",
"type": "input",
"description": "Control voltage input that sets the comparator thresholds (3.33V typ at VCC=5V, 10V typ at VCC=15V)."
},
{
"number": "6",
"name": "THRESHOLD",
"type": "input",
"description": "Threshold input; with trigger above 1/3 VCC, the output goes low and the discharge switch turns on when the threshold voltage exceeds 2/3 VCC (threshold current 10 pA max at VCC=5V)."
},
{
"number": "7",
"name": "DISCHARGE",
"type": "passive",
"description": "Open-drain discharge output switch that discharges the timing capacitor (saturation voltage 400 mV max at VCC=5V, IDIS=10mA)."
},
{
"number": "8",
"name": "VDD",
"type": "power_in",
"description": "Positive supply pin, recommended 4.5V to 15V with an absolute maximum of 15V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text+vision",
"consensus_model": "claude-opus-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"vision extraction: provenance cannot be text-verified; needs consensus"
],
"pages_sent": 11,
"cost_usd": 0.1609,
"at": "2026-11-05T04:24:32"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/ec2ce94f7f6446de35076e3d51997e7e.pdf",
"pages": 11,
"sha256": "e95f11bad730cc7b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "icm7555n.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
9.27,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "icm7555n-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
9.27,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "01403ea2e1489f16d244cc7ed9814452f0f54ebe3af508adfe76335ddcc449ca",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DIP-8",
"source_page": 8,
"D": {
"nom_mm": 9.25,
"range_mm": [
9.0,
9.5
]
},
"E1": {
"nom_mm": 6.39,
"range_mm": [
6.1,
6.68
]
},
"e": {
"nom_mm": 2.54,
"range_mm": [
null,
null
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "icm7555n.step",
"verdict": "SKIP",
"reasons": [
"the datasheet dimensions give no height or body size to compare"
],
"by": "factory/package_fit.py"
}
}
}
}