main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers icm7555n: viewers · Ray
icm7555n-etched.glb Publish 0.1.0 · Ray
icm7555n-etched.step icm7555n: factory component page (tier=lcsc) · Ray
icm7555n-hero.glb icm7555n: hero GLB from the etched model (keeps the MPN mark) · Ray
icm7555n-hero.overlay.json Publish 0.1.0 · Ray
icm7555n.glb Publish 0.1.0 · Ray
icm7555n.kicad_mod Publish 0.1.0 · Ray
icm7555n.kicad_sym Publish 0.1.0 · Ray
icm7555n.lbr Publish 0.1.0 · Ray
icm7555n.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

ICM7555N

HGSEMI · Timers / Counters · DIP-8

ICM7555N from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin; all voltages are measured relative to this pin unless otherwise specified.
2 TRIGGER input Trigger input; output goes high and the discharge switch turns off when the trigger voltage falls below 1/3 VCC (trigger current 10 pA max at VCC=5V).
3 OUTPUT output Timer output, compatible with TTL and CMOS logic at 5V (VOL 0.4V max at 3.2mA sink, VOH 4.0V min at -2mA source at VCC=5V).
4 RESET input Active-low reset input; a low level forces the output low and turns the discharge switch on (reset voltage 0.4V min, 0.7V typ, 1.2V max at VCC=5V).
5 CONTROL VOLTAGE input Control voltage input that sets the comparator thresholds (3.33V typ at VCC=5V, 10V typ at VCC=15V).
6 THRESHOLD input Threshold input; with trigger above 1/3 VCC, the output goes low and the discharge switch turns on when the threshold voltage exceeds 2/3 VCC (threshold current 10 pA max at VCC=5V).
7 DISCHARGE passive Open-drain discharge output switch that discharges the timing capacitor (saturation voltage 400 mV max at VCC=5V, IDIS=10mA).
8 VDD power_in Positive supply pin, recommended 4.5V to 15V with an absolute maximum of 15V.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-8
Category Clock/Timing
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply current (VCC=5V) Is 30 50 uA VCC=5V 4
Supply current (VCC=10V) Is 60 100 uA VCC=10V 4
Supply current (VCC=15V) Is 90 150 uA VCC=15V 4
Control voltage (VCC=5V) VCTRL 3.28 3.33 3.38 V VCC=5V 4
Control voltage (VCC=10V) VCTRL 6.6 6.66 6.7 V VCC=10V 4
Control voltage (VCC=15V) VCTRL 9.95 10 10.15 V VCC=15V 4
Discharge saturation voltage VDIS 100 400 mV VCC=5V, IDIS=10mA 4
Output voltage low (VCC=5V) VOL 0.1 0.4 V VCC=5V, Io=3.2mA 4
Output voltage low (VCC=15V) VOL 0.1 0.4 V VCC=15V, Io=3.2mA 4
Output voltage high (VCC=5V) VOH 4 4.5 V VCC=5V, Io=-2mA 4
Output voltage high (VCC=15V) VOH 14.5 14.75 V VCC=15V, Io=-2mA 4
Trigger voltage (VCC=5V) VTRIG 1.55 1.66 1.7 V VCC=5V 4
Trigger voltage (VCC=10V) VTRIG 3.23 3.33 3.38 V VCC=10V 4
Trigger voltage (VCC=15V) VTRIG 4.95 5 5.05 V VCC=15V 4
Trigger current ITRIG 10 pA VCC=5V 4
Reset voltage VRES 0.4 0.7 1.2 V VCC=5V 4
Reset current IRES 10 pA VCC=5V 4
Threshold current ITHRESH 10 pA VCC=5V 4
Discharge pin leakage current IDIS 1 100 nA VCC=12V 4
Output rise time tR 35 40 75 ns VCC=5V, RL=10MΩ, CL=10pF 4
Output fall time tF 35 40 75 ns VCC=5V, RL=10MΩ, CL=10pF 4
Maximum frequency Fmax 500 KHz 4
Supply voltage (absolute maximum) Vcc 15 V 3
Operating temperature range Toper -40 85 ℃ 3
Junction temperature Tj 150 ℃ 3
Storage temperature range Tstg -50 150 ℃ 3
Lead temperature (soldering) TLEAD 260 ℃ 10 s soldering 3
Supply voltage (recommended operating) Vcc 4.5 15 V TA=25℃ 3
Maximum input voltage (Vth, Vtrig, VCTRL, Vreset) Vth,Vtrig,VCTRL,Vreset -0.3 V 3

CAD (KiCad official)

  • Symbol: ICM7555N
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: icm7555n-etched.step / icm7555n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); icm7555n.step / icm7555n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (11 pp, sha256 e95f11bad730cc7b, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF