main
Ray
Publish 0.1.0
24dfd48
ICM7555ESA+T
Maxim Integrated · Timers / Clock Oscillators · SOIC-8
ICM7555ESA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, the supply return for the timer. |
| 2 | TRIGGER | input | Trigger input; a negative pulse below 1/3 V+ sets the output high and starts the timing cycle, with trigger current of 10 pA typical at V+ = 5V. |
| 3 | OUTPUT | output | CMOS output that can drive CMOS and TTL loads, sinking 3.2mA at 0.4V max low and sourcing 1-2mA high. |
| 4 | RESET | input | Active-low reset that dominates all other inputs and forces output low and discharge on, with trip voltage of 0.4V to 1.0V typical 0.7V. |
| 5 | CONTROL VOLTAGE | input | Control voltage input that sets the THRESHOLD and TRIGGER comparator trip levels (0.66 V+ typical) and needs no decoupling capacitor. |
| 6 | THRESHOLD | input | Threshold comparator input that resets the timer when it rises above 2/3 V+, with 10 pA typical input current at V+ = 5V. |
| 7 | DISCHARGE | passive | Open discharge switch output that discharges the timing capacitor, with 0.4V max at 3.2mA sink and V+ = 5V. |
| 8 | V+ | power_in | Positive supply, 2V to 18V (2V to 16.5V in the Maxim Advantage specification). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | RTC/Clock Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 18 | V | 2 | ||||
| Output Current | 100 | mA | 2 | ||||
| Power Dissipation | 200 | mW | ICM7555 (Note 2) | 2 | |||
| Power Dissipation at +125°C | 20 | mW | at +125°C (Note 2) | 3 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 60s | 2 | |||
| Junction Temperature | 135 | °C | should not exceed (Note 2) | 2 | |||
| Power Dissipation Derating Factor | 2 | mW/°C | ICM7555, approximately (Note 2) | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | ICM7555ESA per ordering information | 1 |
CAD (KiCad official)
- Symbol:
ICM7555ESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
icm7555esa-t-etched.step/icm7555esa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icm7555esa-t.step/icm7555esa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (11 pp, sha256
30fd218015c11427, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ICM7555ESA+T
**Maxim Integrated** · Timers / Clock Oscillators · SOIC-8
ICM7555ESA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, the supply return for the timer. |
| 2 | TRIGGER | input | Trigger input; a negative pulse below 1/3 V+ sets the output high and starts the timing cycle, with trigger current of 10 pA typical at V+ = 5V. |
| 3 | OUTPUT | output | CMOS output that can drive CMOS and TTL loads, sinking 3.2mA at 0.4V max low and sourcing 1-2mA high. |
| 4 | RESET | input | Active-low reset that dominates all other inputs and forces output low and discharge on, with trip voltage of 0.4V to 1.0V typical 0.7V. |
| 5 | CONTROL VOLTAGE | input | Control voltage input that sets the THRESHOLD and TRIGGER comparator trip levels (0.66 V+ typical) and needs no decoupling capacitor. |
| 6 | THRESHOLD | input | Threshold comparator input that resets the timer when it rises above 2/3 V+, with 10 pA typical input current at V+ = 5V. |
| 7 | DISCHARGE | passive | Open discharge switch output that discharges the timing capacitor, with 0.4V max at 3.2mA sink and V+ = 5V. |
| 8 | V+ | power_in | Positive supply, 2V to 18V (2V to 16.5V in the Maxim Advantage specification). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | RTC/Clock Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | | | | 18 | V | | 2 |
| Output Current | | | | 100 | mA | | 2 |
| Power Dissipation | | | | 200 | mW | ICM7555 (Note 2) | 2 |
| Power Dissipation at +125°C | | | | 20 | mW | at +125°C (Note 2) | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | soldering, 60s | 2 |
| Junction Temperature | | | | 135 | °C | should not exceed (Note 2) | 2 |
| Power Dissipation Derating Factor | | | 2 | | mW/°C | ICM7555, approximately (Note 2) | 2 |
| Operating Temperature Range | TA | -40 | | 85 | °C | ICM7555ESA per ordering information | 1 |
## CAD (KiCad official)
- Symbol: `ICM7555ESA+T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `icm7555esa-t-etched.step` / `icm7555esa-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `icm7555esa-t.step` / `icm7555esa-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/icm7555-icm7556.pdf) (11 pp, sha256 `30fd218015c11427`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/icm7555esa-t-datasheet.pdf)