Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ICM7555ESA+T

Maxim Integrated · Timers / Clock Oscillators · SOIC-8

ICM7555ESA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin, the supply return for the timer.
2 TRIGGER input Trigger input; a negative pulse below 1/3 V+ sets the output high and starts the timing cycle, with trigger current of 10 pA typical at V+ = 5V.
3 OUTPUT output CMOS output that can drive CMOS and TTL loads, sinking 3.2mA at 0.4V max low and sourcing 1-2mA high.
4 RESET input Active-low reset that dominates all other inputs and forces output low and discharge on, with trip voltage of 0.4V to 1.0V typical 0.7V.
5 CONTROL VOLTAGE input Control voltage input that sets the THRESHOLD and TRIGGER comparator trip levels (0.66 V+ typical) and needs no decoupling capacitor.
6 THRESHOLD input Threshold comparator input that resets the timer when it rises above 2/3 V+, with 10 pA typical input current at V+ = 5V.
7 DISCHARGE passive Open discharge switch output that discharges the timing capacitor, with 0.4V max at 3.2mA sink and V+ = 5V.
8 V+ power_in Positive supply, 2V to 18V (2V to 16.5V in the Maxim Advantage specification).

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOIC-8
Category RTC/Clock Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage 18 V 2
Output Current 100 mA 2
Power Dissipation 200 mW ICM7555 (Note 2) 2
Power Dissipation at +125°C 20 mW at +125°C (Note 2) 3
Storage Temperature -65 150 °C 2
Lead Temperature 300 °C soldering, 60s 2
Junction Temperature 135 °C should not exceed (Note 2) 2
Power Dissipation Derating Factor 2 mW/°C ICM7555, approximately (Note 2) 2
Operating Temperature Range TA -40 85 °C ICM7555ESA per ordering information 1

CAD (KiCad official)

  • Symbol: ICM7555ESA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: icm7555esa-t-etched.step / icm7555esa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); icm7555esa-t.step / icm7555esa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (11 pp, sha256 30fd218015c11427, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF