main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers icm-42670-p: viewers · Ray
icm-42670-p-etched.glb icm-42670-p: factory component page (tier=mfr) · Ray
icm-42670-p-etched.step icm-42670-p: factory component page (tier=mfr) · Ray
icm-42670-p-hero.glb icm-42670-p: hero GLB from the etched model (keeps the MPN mark) · Ray
icm-42670-p-hero.overlay.json icm-42670-p: hero GLB from the etched model (keeps the MPN mark) · Ray
icm-42670-p.glb Publish 0.1.0 · Ray
icm-42670-p.kicad_mod Publish 0.1.0 · Ray
icm-42670-p.kicad_sym Publish 0.1.0 · Ray
icm-42670-p.lbr Publish 0.1.0 · Ray
icm-42670-p.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

ICM-42670-P

TDK InvenSense · Accelerometers · LGA-14(2.5x3)

ICM-42670-P from TDK InvenSense, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AP_SDO / AP_AD0 output AP_SDO is the AP SPI serial data output in 4-wire mode, and AP_AD0 is the AP I3CSM / I2C slave address LSB.
2 RESV unconnected Reserved pin: no connect, or connect to GND or VDDIO.
3 RESV unconnected Reserved pin: no connect, or connect to GND or VDDIO.
4 INT1 / INT output INT1 is interrupt 1 and can be push-pull or open drain; when used as INT, all interrupts are mapped to this pin.
5 VDDIO power_in IO power supply voltage, operating range 1.71V to 3.6V.
6 GND power_in Power supply ground.
7 FSYNC input Frame sync input; connect to GND if FSYNC is not used.
8 VDD power_in Power supply voltage, operating range 1.71V to 3.6V.
9 INT2 output INT2 is interrupt 2 and can be push-pull or open drain.
10 RESV unconnected Reserved pin: no connect, or connect to GND or VDDIO.
11 RESV unconnected Reserved pin: no connect, or connect to GND or VDDIO.
12 AP_CS input AP SPI chip select; connect to VDDIO when using the AP I3CSM / I2C interface.
13 AP_SCL / AP_SCLK input AP_SCL is the AP I3CSM / I2C serial clock, and AP_SCLK is the AP SPI serial clock.
14 AP_SDA / AP_SDIO / AP_SDI bidirectional AP_SDA is the AP I3CSM / I2C serial data, AP_SDIO is the AP SPI serial data I/O in 3-wire mode, and AP_SDI is the AP SPI serial data input in 4-wire mode.

Key specifications

Parameter Value
Manufacturer TDK InvenSense
Package LGA-14(2.5x3)
Category Sensors
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Sensitivity Scale Factor Initial Tolerance -1 1 % 25°C 10
Sensitivity Scale Factor Variation Over Temperature -0.007 0.007 %/ºC -40°C to +85°C; Board-Level 10
Nonlinearity (gyroscope) -0.1 0.1 % Best fit straight line; 25°C; Board-Level 10
Cross-Axis Sensitivity (gyroscope) -2 2 % Board-level 10
Initial ZRO Tolerance -1 1 º/s 25°C 10
ZRO Variation vs. Temperature -0.015 0.015 º/s/ºC -40°C to +85°C; Board-Level 10
Gyroscope Mechanical Frequencies 25 28 30 kHz 10
Low Pass Filter Response (gyroscope) 16 180 Hz 10
Output Data Rate (gyroscope) 12.5 1600 Hz 10
Sensitivity Scale Factor Initial Tolerance (accelerometer) -1 1 % 25°C 11
Sensitivity Change vs. Temperature -0.01 0.01 %/ºC -40°C to +85°C; Board-Level 11
Nonlinearity (accelerometer) -0.1 0.1 % Best Fit Straight Line, ±2g; Board-Level 11
Cross-Axis Sensitivity (accelerometer) -1 1 % Board-level 11
Zero-G Initial Tolerance -25 25 mg 25°C 11
Zero-G Level Change vs. Temperature -0.15 0.15 mg/ºC -40°C to +85°C; Board-Level 11
Low Pass Filter Response (accelerometer) 16 180 Hz 11
Output Data Rate (accelerometer) 1.5625 1600 Hz 11
VDD VDD 1.71 1.8 3.6 V 12
VDDIO VDDIO 1.71 1.8 3.6 V 12
Specified Temperature Range -40 85 °C 12
Supply Ramp Time 0.1 3 ms Valid power-on RESET 13
Temperature Sensor Operating Range -40 85 °C Ambient 13
ODR With Filter (temperature sensor) 1.5625 1600 Hz With Filter 13
Room Temperature Offset -3 3 °C 25°C 13
Sensitivity Trimmed 125 126.9 129 LSB/°C Trimmed 13
Sensitivity for FIFO data 1.95 1.983 2.01 LSB/°C Trimmed 13
VOL.INT, INT Low-Level Output Voltage VOL.INT 0.1 V OPEN=1, 0.3 mA sink current 13
INT Pulse Width tINT 8 100 µs int_tpulse_duration= 0, 1 (100us, 8us) 13
Input Capacitance CI 10 pF 13
VOL, LOW-Level Output Voltage (I2C) VOL 0 0.4 V 3 mA sink current 13
Output Fall Time (I2C) tof 300 ns from VIHmax to VILmax; Cb bus capacitance in pF 13
Clock Frequency Initial Tolerance -3 3 % CLKSEL=2b00 or gyro inactive; 25°C 13
Clock Frequency Initial Tolerance -1 1 % CLKSEL=2b01 and gyro active; 25°C 13
Frequency Variation over Temperature -3 3 % CLKSEL=2b00 or gyro inactive; -40°C to +85°C 13
Frequency Variation over Temperature -1 1 % CLKSEL=2b01 and gyro active; -40°C to +85°C 13
fSCL, SCL Clock Frequency fSCL 1 MHz I2C fast-mode plus 14
fSPC, SCLK Clock Frequency fSPC 24 MHz Default 15
Supply Voltage VDD VDD -0.5 4 V 17
Supply Voltage VDDIO VDDIO -0.5 4 V 17
Acceleration (Any Axis, unpowered) 20000 g 0.2 ms 17
Operating Temperature Range -40 85 °C 17
Storage Temperature Range -40 125 °C 17
Electrostatic Discharge Protection (HBM) 2 kV HBM 17
Electrostatic Discharge Protection (CDM) 500 V CDM 17
Latch-up -100 100 mA JEDEC Class II, 125°C 17

CAD (KiCad official)

  • Symbol: ICM-42670-P
  • Footprint: Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm
  • 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
  • 3D model files: icm-42670-p-etched.step / icm-42670-p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); icm-42670-p.step / icm-42670-p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TDK InvenSense datasheet (103 pp, sha256 8716d8187abf2f89, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF