main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs icm-20600: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers icm-20600: viewers · Ray
icm-20600-etched.fit.json icm-20600: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
icm-20600-etched.glb icm-20600: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
icm-20600-etched.step icm-20600: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
icm-20600.glb Publish 0.1.0 · Ray
icm-20600.kicad_mod Publish 0.1.0 · Ray
icm-20600.kicad_sym Publish 0.1.0 · Ray
icm-20600.lbr Publish 0.1.0 · Ray
icm-20600.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json icm-20600: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md icm-20600: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ICM-20600

TDK InvenSense · Attitude Sensor/Gyroscope · LGA-14(2.5x3)

ICM-20600 from TDK InvenSense, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AD0/SDO bidirectional In I2C mode, sets the LSB of the 7-bit I2C slave address (AD0). In SPI mode, functions as the SPI serial data output (SDO) from the device to the host.
2 NC unconnected No connect. Leave floating or tie as recommended by application schematic.
3 NC unconnected No connect. Leave floating or tie as recommended by application schematic.
4 INT1 output Programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain, active-high or active-low, and level or pulse behavior via user registers.
5 VDDIO power_in Digital I/O supply voltage. Sets the logic levels for the I2C/SPI interface and other digital pins. Operating range 1.71 V to 3.45 V DC; bypass with 10 nF X7R capacitor to GND.
6 GND power_in Power supply ground reference for the device.
7 RESV passive Reserved pin. Must be connected to ground per the application schematic.
8 VDD power_in Main analog power supply voltage for the MEMS sensors and internal LDOs. Operating range 1.71 V to 3.45 V DC; bypass with 0.1 µF and 2.2 µF X7R capacitors to GND.
9 INT2 output Secondary programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain via user registers.
10 FSYNC/NC input Frame synchronization digital input used to timestamp or trigger sensor samples from an external source. May be left as No Connect if unused.
11 REGOUT passive Internal LDO regulator filter capacitor connection. Requires an external 0.1 µF X7R decoupling capacitor to GND. Do not drive externally.
12 nCS input SPI chip select input, active low. In SPI mode selects the device for a serial transaction. State at power-up also latches the interface mode (SPI vs. I2C).
13 SCL/SCLK input I2C serial clock (SCL) input in I2C mode, or SPI serial clock (SCLK) input in SPI mode.
14 SDA/SDI bidirectional I2C serial data (SDA, open-drain bidirectional) in I2C mode, or SPI serial data input (SDI/MOSI) in SPI mode.

Key specifications

Parameter Value
Manufacturer TDK InvenSense
Package LGA-14(2.5x3)
Category Sensor
Pins 14

CAD (KiCad official)

  • Symbol: ICM-20600
  • Footprint: Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm
  • 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
  • 3D model files: icm-20600-etched.step / icm-20600-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); icm-20600.step / icm-20600.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TDK InvenSense datasheet (57 pp, sha256 88b79a954490afe6, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF