component
ICM-20600
Public Made by Adomby adom
TDK InvenSense Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownICM-20600
TDK InvenSense · Attitude Sensor/Gyroscope · LGA-14(2.5x3)
ICM-20600 from TDK InvenSense, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AD0/SDO | bidirectional | In I2C mode, sets the LSB of the 7-bit I2C slave address (AD0). In SPI mode, functions as the SPI serial data output (SDO) from the device to the host. |
| 2 | NC | unconnected | No connect. Leave floating or tie as recommended by application schematic. |
| 3 | NC | unconnected | No connect. Leave floating or tie as recommended by application schematic. |
| 4 | INT1 | output | Programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain, active-high or active-low, and level or pulse behavior via user registers. |
| 5 | VDDIO | power_in | Digital I/O supply voltage. Sets the logic levels for the I2C/SPI interface and other digital pins. Operating range 1.71 V to 3.45 V DC; bypass with 10 nF X7R capacitor to GND. |
| 6 | GND | power_in | Power supply ground reference for the device. |
| 7 | RESV | passive | Reserved pin. Must be connected to ground per the application schematic. |
| 8 | VDD | power_in | Main analog power supply voltage for the MEMS sensors and internal LDOs. Operating range 1.71 V to 3.45 V DC; bypass with 0.1 µF and 2.2 µF X7R capacitors to GND. |
| 9 | INT2 | output | Secondary programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain via user registers. |
| 10 | FSYNC/NC | input | Frame synchronization digital input used to timestamp or trigger sensor samples from an external source. May be left as No Connect if unused. |
| 11 | REGOUT | passive | Internal LDO regulator filter capacitor connection. Requires an external 0.1 µF X7R decoupling capacitor to GND. Do not drive externally. |
| 12 | nCS | input | SPI chip select input, active low. In SPI mode selects the device for a serial transaction. State at power-up also latches the interface mode (SPI vs. I2C). |
| 13 | SCL/SCLK | input | I2C serial clock (SCL) input in I2C mode, or SPI serial clock (SCLK) input in SPI mode. |
| 14 | SDA/SDI | bidirectional | I2C serial data (SDA, open-drain bidirectional) in I2C mode, or SPI serial data input (SDI/MOSI) in SPI mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TDK InvenSense |
| Package | LGA-14(2.5x3) |
| Category | Sensor |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
ICM-20600 - Footprint:
Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm - 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
- 3D model files:
icm-20600-etched.step/icm-20600-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icm-20600.step/icm-20600.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TDK InvenSense datasheet (57 pp, sha256
88b79a954490afe6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).