← Commit history
page.json+153−8@@ -1,13 +1,163 @@ {+ "schema_version": 1,+ "type": "component", "slug": "icm-20600",+ "title": "ICM-20600",+ "brief": "TDK InvenSense Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "TDK InvenSense Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "sensor", "icm-20600" ],+ "component": {+ "mpn": "ICM-20600",+ "manufacturer": "TDK InvenSense",+ "package": "LGA-14(2.5x3)",+ "pin_count": 14,+ "category": "Sensor",+ "subcategory": "Attitude Sensor/Gyroscope",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/4b18da1bfa8947e88257938a9cfa6938.pdf",+ "parts": {+ "symbol": "icm-20600.kicad_sym",+ "footprint": "icm-20600.kicad_mod",+ "model_3d": "icm-20600.glb",+ "model_3d_step": "icm-20600.step",+ "lbr": "icm-20600.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "AD0/SDO",+ "type": "bidirectional",+ "description": "In I2C mode, sets the LSB of the 7-bit I2C slave address (AD0). In SPI mode, functions as the SPI serial data output (SDO) from the device to the host."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie as recommended by application schematic."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie as recommended by application schematic."+ },+ {+ "number": "4",+ "name": "INT1",+ "type": "output",+ "description": "Programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain, active-high or active-low, and level or pulse behavior via user registers."+ },+ {+ "number": "5",+ "name": "VDDIO",+ "type": "power_in",+ "description": "Digital I/O supply voltage. Sets the logic levels for the I2C/SPI interface and other digital pins. Operating range 1.71 V to 3.45 V DC; bypass with 10 nF X7R capacitor to GND."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Power supply ground reference for the device."+ },+ {+ "number": "7",+ "name": "RESV",+ "type": "passive",+ "description": "Reserved pin. Must be connected to ground per the application schematic."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Main analog power supply voltage for the MEMS sensors and internal LDOs. Operating range 1.71 V to 3.45 V DC; bypass with 0.1 \u00b5F and 2.2 \u00b5F X7R capacitors to GND."+ },+ {+ "number": "9",+ "name": "INT2",+ "type": "output",+ "description": "Secondary programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain via user registers."+ },+ {+ "number": "10",+ "name": "FSYNC/NC",+ "type": "input",+ "description": "Frame synchronization digital input used to timestamp or trigger sensor samples from an external source. May be left as No Connect if unused."+ },+ {+ "number": "11",+ "name": "REGOUT",+ "type": "passive",+ "description": "Internal LDO regulator filter capacitor connection. Requires an external 0.1 \u00b5F X7R decoupling capacitor to GND. Do not drive externally."+ },+ {+ "number": "12",+ "name": "nCS",+ "type": "input",+ "description": "SPI chip select input, active low. In SPI mode selects the device for a serial transaction. State at power-up also latches the interface mode (SPI vs. I2C)."+ },+ {+ "number": "13",+ "name": "SCL/SCLK",+ "type": "input",+ "description": "I2C serial clock (SCL) input in I2C mode, or SPI serial clock (SCLK) input in SPI mode."+ },+ {+ "number": "14",+ "name": "SDA/SDI",+ "type": "bidirectional",+ "description": "I2C serial data (SDA, open-drain bidirectional) in I2C mode, or SPI serial data input (SDI/MOSI) in SPI mode."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/4b18da1bfa8947e88257938a9cfa6938.pdf",+ "pages": 57,+ "sha256": "88b79a954490afe6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "TDK InvenSense",+ "Package": "LGA-14(2.5x3)",+ "Category": "Sensor",+ "Pins": "14"+ }+ },+ "variants": [],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "icm-20600"+ ],+ "discovery_pitch": "ICM-20600 (TDK InvenSense) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +175,5 @@ "docs/icm-20600-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }