← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# ICM-20600++**TDK InvenSense** · Attitude Sensor/Gyroscope · LGA-14(2.5x3)++ICM-20600 from TDK InvenSense, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AD0/SDO | bidirectional | In I2C mode, sets the LSB of the 7-bit I2C slave address (AD0). In SPI mode, functions as the SPI serial data output (SDO) from the device to the host. |+| 2 | NC | unconnected | No connect. Leave floating or tie as recommended by application schematic. |+| 3 | NC | unconnected | No connect. Leave floating or tie as recommended by application schematic. |+| 4 | INT1 | output | Programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain, active-high or active-low, and level or pulse behavior via user registers. |+| 5 | VDDIO | power_in | Digital I/O supply voltage. Sets the logic levels for the I2C/SPI interface and other digital pins. Operating range 1.71 V to 3.45 V DC; bypass with 10 nF X7R capacitor to GND. |+| 6 | GND | power_in | Power supply ground reference for the device. |+| 7 | RESV | passive | Reserved pin. Must be connected to ground per the application schematic. |+| 8 | VDD | power_in | Main analog power supply voltage for the MEMS sensors and internal LDOs. Operating range 1.71 V to 3.45 V DC; bypass with 0.1 µF and 2.2 µF X7R capacitors to GND. |+| 9 | INT2 | output | Secondary programmable interrupt digital output. Configurable as totem-pole (push-pull) or open-drain via user registers. |+| 10 | FSYNC/NC | input | Frame synchronization digital input used to timestamp or trigger sensor samples from an external source. May be left as No Connect if unused. |+| 11 | REGOUT | passive | Internal LDO regulator filter capacitor connection. Requires an external 0.1 µF X7R decoupling capacitor to GND. Do not drive externally. |+| 12 | nCS | input | SPI chip select input, active low. In SPI mode selects the device for a serial transaction. State at power-up also latches the interface mode (SPI vs. I2C). |+| 13 | SCL/SCLK | input | I2C serial clock (SCL) input in I2C mode, or SPI serial clock (SCLK) input in SPI mode. |+| 14 | SDA/SDI | bidirectional | I2C serial data (SDA, open-drain bidirectional) in I2C mode, or SPI serial data input (SDI/MOSI) in SPI mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TDK InvenSense |+| Package | LGA-14(2.5x3) |+| Category | Sensor |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `ICM-20600`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TDK InvenSense datasheet](docs/icm-20600-datasheet.pdf) (57 pp, sha256 `88b79a954490afe6`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/icm-20600-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "icm-20600",+ "version": "0.1.0",+ "type": "component",+ "description": "TDK InvenSense Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensor",+ "icm-20600"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "icm-20600.kicad_sym",+ "icm-20600.kicad_mod",+ "icm-20600.glb",+ "icm-20600.step",+ "icm-20600.lbr",+ "docs/hero.png",+ "docs/icm-20600-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}