ICE3PCS01G

{
 "schema": "adom.pads/1",
 "slug": "ice3pcs01g",
 "footprint": "SOIC-14_3.9x8.7mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -3.81
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "BOFO",
   "type": "output",
   "description": "Boost Follower setting. An external DC voltage on this pin indicates the PWM output power level; used to select the boost follower low step. Set with an external resistor divider (R_BOFO1..2, ~200 kΩ).",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "ISENSE",
   "type": "input",
   "description": "Current Sense Input. Senses the voltage drop across the external shunt resistor R_SHUNT for average current control loop and peak current limitation. A series resistor R_CS (~50 Ω) is recommended in series to limit inrush current into the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "SGND",
   "type": "power_in",
   "description": "Signal Ground. Ground reference of the IC signal-level circuitry; kept separate from the power/gate switching ground (PGND).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "ICOMP",
   "type": "output",
   "description": "Current Loop Compensation. Low-pass filter/compensation node for the current control loop; external capacitor C_ICOMP (~4.7 nF/25 V) to SGND integrates the OTA6 output and averages the current sense signal. Internally shorted to 5 V in standby.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "FREQ",
   "type": "input",
   "description": "Switching Frequency Setting. Set the operating frequency (21 kHz to 100 kHz) via a resistor R_FREQ to SGND (e.g. 67 kΩ → ~65 kHz). Also serves as the external synchronization input when driven by an external pulse >2.5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "VB_OK",
   "type": "output",
   "description": "Bulk Voltage OK signal. Internally pulled up to 5 V once the bulk voltage exceeds 95% of the rated level; pulled to ground when VSENSE falls below the VBTHL_EN threshold. Can be used to enable the downstream PWM IC or an inrush relay.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "VBTHL_EN",
   "type": "input",
   "description": "PFC Enable Function / VB_OK turn-off threshold. An external reference sets the VB_OK signal turn-off threshold. Pulling this pin below 0.5 V shuts down the IC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VREF",
   "type": "power_out",
   "description": "Voltage Reference. 5 V internal regulator output with minimum 5 mA sourcing capability; bypass with ~100 nF/25 V to SGND.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "BOP",
   "type": "input",
   "description": "Brownout Protection. Monitors the AC input voltage for brownout protection and line-range selection via an external RC divider from the rectified AC (BOP threshold >1.25 V for start-up).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "OVP",
   "type": "input",
   "description": "Over Voltage Protection. Additional resistive divider from bulk voltage to SGND sets the secondary over-voltage protection threshold to ensure safe system operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "VSENSE",
   "type": "input",
   "description": "Bulk Voltage Sense. Connected via a resistive divider to the boost output bulk voltage; feeds the sigma-delta ADC (2.5 V internal reference, 3.55 kHz sampling) used for voltage regulation, over-voltage and open-loop protection.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "VCC",
   "type": "power_in",
   "description": "IC Supply Voltage. Main supply for the IC section, up to 25 V. UVLO turn-on at 12.0 V (with VSENSE >0.5 V and BOP >1.25 V); turn-off below 11 V. Typical operating current 6.7 mA, standby ~1.4 mA.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "GATE",
   "type": "output",
   "description": "Gate Drive Output for the external PFC boost MOSFET. Gate drive voltage is clamped at 15 V (typical); series resistor R_GATE ~3.3 Ω recommended.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "PGND",
   "type": "power_in",
   "description": "Power Ground / Gate Switching Ground. Return path for the gate driver current; kept separate from SGND for noise isolation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}