ICE1HS01G1XUMA1

{
  "slug": "ice1hs01g1xuma1",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Buffer/Driver/Transceiver, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic ics",
    "ice1hs01g1xuma1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ice1hs01g1xuma1.kicad_sym",
    "ice1hs01g1xuma1.kicad_mod",
    "ice1hs01g1xuma1.glb",
    "ice1hs01g1xuma1.step",
    "ice1hs01g1xuma1.lbr",
    "docs/hero.png",
    "docs/ice1hs01g1xuma1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ice1hs01g1xuma1-hero.glb",
    "ice1hs01g1xuma1-hero.overlay.json",
    "ice1hs01g1xuma1-etched.glb"
  ],
  "component": {
    "mpn": "ICE1HS01G1XUMA1",
    "manufacturer": "Infineon Technologies",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Logic ICs",
    "subcategory": "Buffer/Driver/Transceiver",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/2614f954bb7fe5487de0d7c5d76f1ff1.pdf",
    "parts": {
      "symbol": "ice1hs01g1xuma1.kicad_sym",
      "footprint": "ice1hs01g1xuma1.kicad_mod",
      "model_3d": "ice1hs01g1xuma1-hero.glb",
      "model_3d_plain": "ice1hs01g1xuma1-etched.glb",
      "model_3d_step": "ice1hs01g1xuma1-etched.step",
      "model_3d_step_plain": "ice1hs01g1xuma1.step",
      "lbr": "ice1hs01g1xuma1.lbr"
    },
    "distributor_links": {
      "lcsc": "C3753584",
      "digikey": "ICE1HS01G1XUMA1TR-ND",
      "mouser": "726-ICE1HS01G1XUMA1"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T12:24:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ICE1HS01G1XUMA1TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "726-ICE1HS01G1XUMA1",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FMIN",
        "type": "passive",
        "description": "A resistor to ground sets the current out of this pin (pin held at 1.5V), which determines the minimum switching frequency and also the maximum and soft-start frequencies; max source current 2.5 mA, voltage -0.3 to 5 V."
      },
      {
        "number": "2",
        "name": "CS",
        "type": "input",
        "description": "Current sense input with two comparators: above about 0.8V (VCSL) the switching frequency is raised, above about 1.63V (VCSH) the IC latches off; voltage -0.3 to 5 V."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Feedback input from the optocoupler collector with internal pull-up RFB (20 kohm typ.) that adjusts switching frequency over 0.9V to 3.9V and triggers overload/open-loop protection above VFBH (4.5V); voltage -0.3 to 5 V."
      },
      {
        "number": "4",
        "name": "VINS",
        "type": "input",
        "description": "Mains input voltage sense via resistive divider with turn-on threshold of 1.25V typ. and hysteresis current Ihys (12 uA typ.), and a capacitor here sets the restart time after overload protection; voltage -0.3 to 5 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "IC common ground, reference for all voltages."
      },
      {
        "number": "6",
        "name": "LG",
        "type": "output",
        "description": "Low-side power MOSFET gate driver output with 50% duty cycle and 380 ns dead time, voltage -0.3 to 18 V."
      },
      {
        "number": "7",
        "name": "HG",
        "type": "output",
        "description": "High-side power MOSFET gate driver output with 50% duty cycle and 380 ns dead time, voltage -0.3 to 18 V."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "IC supply voltage with turn-on threshold of 12V typ., turn-off about 11V, operating range 10.2V to 18V, absolute maximum 20.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering code ICE1HS01G-1 is listed in the datasheet only in PG-DSO-8 (matches the SOIC-8 hint).; Pin types are inferred from the functional descriptions. FMIN is a resistor-programmed reference out"
        ],
        "pages_sent": 19,
        "cost_usd": 0.1453,
        "at": "2026-10-23T12:24:24"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/2614f954bb7fe5487de0d7c5d76f1ff1.pdf",
        "pages": 19,
        "sha256": "5b7c8a46b5f53a49",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ice1hs01g1xuma1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ice1hs01g1xuma1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "971e6ab3520fd2896ad3993094e4cfc088695d96fb95ecb484d23e556d2c8617",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}