main
Ray
Publish 0.1.0
8bd0442
IAM-20680HP
TDK InvenSense · Attitude Sensors · LGA-16(3x3)
IAM-20680HP from TDK InvenSense, in a LGA-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDIO | power_in | Digital I/O supply voltage, specified from 1.71 V to 3.6 V. |
| 2 | SCL/SPC | input | I2C serial clock (SCL) or SPI serial clock (SPC); I2C lines are open drain with pull-up resistors (e.g. 10 kΩ) required, and input voltage is limited to -0.5 V to VDDIO + 0.5 V. |
| 3 | SDA/SDI | bidirectional | I2C serial data (SDA, open drain, pull-up required) or SPI serial data input (SDI); input voltage is limited to -0.5 V to VDDIO + 0.5 V. |
| 4 | SA0/SDO | bidirectional | I2C slave address LSB (SA0, selects b1101000 when low and b1101001 when high) or SPI serial data output (SDO). |
| 5 | CS | input | Chip select: 0 selects SPI mode and 1 selects I2C mode. |
| 6 | INT | output | Interrupt digital output, configurable as totem pole or open-drain. |
| 7 | RESV | unconnected | Reserved; do not connect. |
| 8 | FSYNC | input | Optional synchronization digital input; connect to GND if unused, with input voltage limited to -0.5 V to VDDIO + 0.5 V. |
| 9 | RESV | passive | Reserved; connect to GND. |
| 10 | RESV | passive | Reserved; connect to GND. |
| 11 | RESV | passive | Reserved; connect to GND. |
| 12 | RESV | passive | Reserved; connect to GND. |
| 13 | GND | power_in | Ground; connect to GND. |
| 14 | REGOUT | passive | Regulator filter capacitor connection; the BOM specifies a 0.47 µF X7R ±10% capacitor, and REGOUT is rated -0.5 V to 2 V. |
| 15 | RESV | passive | Reserved; connect to GND. |
| 16 | VDD | power_in | Power supply, operating range 1.71 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TDK InvenSense |
| Package | LGA-16(3x3) |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nonlinearity (gyroscope) | -0.1 | 0.1 | % | Best fit straight line; 25°C | 9 | ||
| Cross-Axis Sensitivity (gyroscope) | -5 | 5 | % | 25°C | 9 | ||
| Initial ZRO Tolerance (gyroscope) | -0.8 | dps | 25°C | 9 | |||
| ZRO Variation Over Temperature (gyroscope) | -1 | 1 | dps | -40°C to +85°C | 9 | ||
| Gyroscope Mechanical Frequencies | 25 | 27 | 29 | KHz | 9 | ||
| Gyroscope Low Pass Filter Response Programmable Range | 5 | 250 | Hz | Programmable range | 9 | ||
| Gyroscope Output Data Rate | 4 | 8000 | Hz | Programmable, Normal (Filtered) mode | 9 | ||
| Nonlinearity (accelerometer) | -0.25 | 0.25 | % | Best Fit Straight Line for 2g, 25°C | 10 | ||
| Cross-Axis Sensitivity (accelerometer) | -5 | 5 | % | 25°C | 10 | ||
| Initial Zero-G Tolerance | -50 | 50 | mg | All axes, 25°C | 10 | ||
| Zero-G Level Change vs. Temperature | -50 | 50 | mg | -40°C to +85°C | 10 | ||
| Accelerometer Low Pass Filter Response Programmable Range | 5 | 218 | Hz | Programmable range | 10 | ||
| Accelerometer Output Data Rate, Low power (duty-cycled) | 0.24 | 500 | Hz | Low power (duty-cycled) | 10 | ||
| Accelerometer Output Data Rate, Low noise (active) | 4 | 4000 | Hz | Low noise (active) | 10 | ||
| Supply Voltage VDD | VDD | 1.71 | 1.8 | 3.6 | V | 11 | |
| Supply Voltage VDDIO | VDDIO | 1.71 | 1.8 | 3.6 | V | 11 | |
| Specified Temperature Range | -40 | 85 | °C | Performance parameters not applicable beyond Specified Temperature Range | 11 | ||
| Supply Ramp Time (TRAMP) | TRAMP | 0.01 | 100 | ms | Monotonic ramp; 10% to 90% of final value | 12 | |
| Temperature Sensor Operating Range (Ambient) | -40 | 85 | °C | Ambient | 12 | ||
| Power-On Reset Supply Ramp Time (TRAMP) | TRAMP | 0.01 | 100 | ms | Valid power-on RESET | 12 | |
| Start-up time for register read/write | 11 | 100 | ms | From power-up | 12 | ||
| Digital Input Capacitance (FSYNC, SA0, SPC, SDI, CS) | CI | 10 | pF | 12 | |||
| VOL.INT, INT Low-Level Output Voltage | VOL.INT | 0.1 | V | OPEN=1, 0.3mA sink current | 12 | ||
| I2C VOL, LOW-Level Output Voltage | VOL | 0 | 0.4 | V | 3 mA sink current | 12 | |
| I2C Output Fall Time (tof) | tof | 300 | ns | Cb bus capacitance in pF; 20+0.1Cb | 12 | ||
| I2C VIL, LOW Level Input Voltage | VIL | -0.5 | V | 12 | |||
| Clock Frequency Initial Tolerance (gyro inactive) | -5 | 5 | % | CLK_SEL=0, 6 or gyro inactive; 25°C | 13 | ||
| Clock Frequency Initial Tolerance (gyro active) | -1 | 1 | % | CLK_SEL=1,2,3,4,5 and gyro active; 25°C | 13 | ||
| Clock Frequency Variation over Temperature (gyro inactive) | -10 | 10 | % | CLK_SEL=0,6 or gyro inactive | 13 | ||
| Clock Frequency Variation over Temperature (gyro active) | -1 | 1 | % | CLK_SEL=1,2,3,4,5 and gyro active | 13 | ||
| SPI Operating Frequency, Low Speed Characterization | -10 | 10 | % | Nominal 100 kHz; all registers read/write | 13 | ||
| Supply Voltage, VDD (absolute maximum) | VDD | -0.5 | 4 | V | 16 | ||
| Supply Voltage, VDDIO (absolute maximum) | VDDIO | -0.5 | 4 | V | 16 | ||
| REGOUT (absolute maximum) | REGOUT | -0.5 | 2 | V | 16 | ||
| Input Voltage Level (SA0, FSYNC, SCL, SDA) | -0.5 | V | Upper limit printed as VDDIO + 0.5 V | 16 | |||
| Acceleration (unpowered) | 10000 | g | Any axis, unpowered, 0.2 ms | 16 | |||
| Operating Temperature Range (absolute maximum) | -40 | 85 | °C | 16 | |||
| Storage Temperature Range | -40 | 125 | °C | 16 | |||
| Electrostatic Discharge (HBM) | 2 | kV | HBM | 16 | |||
| Electrostatic Discharge (MM) | 250 | V | MM | 16 | |||
| Latch-up | -100 | 100 | mA | JEDEC Class II (2), 125°C | 16 | ||
| Junction-to-ambient thermal resistance | θJA | 84.58 | °C/W | Junction-to-ambient | 16 | ||
| Junction-to-top characterization parameter | ψJT | 7 | °C/W | Junction-to-top | 16 |
CAD (KiCad official)
- Symbol:
IAM-20680HP - Footprint:
Package_LGA:LGA-16_3x3mm_P0.5mm - 3D model: LGA-16(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
iam-20680hp-etched.step/iam-20680hp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iam-20680hp.step/iam-20680hp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TDK InvenSense datasheet (52 pp, sha256
5ad58c71352bfcad, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# IAM-20680HP
**TDK InvenSense** · Attitude Sensors · LGA-16(3x3)
IAM-20680HP from TDK InvenSense, in a LGA-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDIO | power_in | Digital I/O supply voltage, specified from 1.71 V to 3.6 V. |
| 2 | SCL/SPC | input | I2C serial clock (SCL) or SPI serial clock (SPC); I2C lines are open drain with pull-up resistors (e.g. 10 kΩ) required, and input voltage is limited to -0.5 V to VDDIO + 0.5 V. |
| 3 | SDA/SDI | bidirectional | I2C serial data (SDA, open drain, pull-up required) or SPI serial data input (SDI); input voltage is limited to -0.5 V to VDDIO + 0.5 V. |
| 4 | SA0/SDO | bidirectional | I2C slave address LSB (SA0, selects b1101000 when low and b1101001 when high) or SPI serial data output (SDO). |
| 5 | CS | input | Chip select: 0 selects SPI mode and 1 selects I2C mode. |
| 6 | INT | output | Interrupt digital output, configurable as totem pole or open-drain. |
| 7 | RESV | unconnected | Reserved; do not connect. |
| 8 | FSYNC | input | Optional synchronization digital input; connect to GND if unused, with input voltage limited to -0.5 V to VDDIO + 0.5 V. |
| 9 | RESV | passive | Reserved; connect to GND. |
| 10 | RESV | passive | Reserved; connect to GND. |
| 11 | RESV | passive | Reserved; connect to GND. |
| 12 | RESV | passive | Reserved; connect to GND. |
| 13 | GND | power_in | Ground; connect to GND. |
| 14 | REGOUT | passive | Regulator filter capacitor connection; the BOM specifies a 0.47 µF X7R ±10% capacitor, and REGOUT is rated -0.5 V to 2 V. |
| 15 | RESV | passive | Reserved; connect to GND. |
| 16 | VDD | power_in | Power supply, operating range 1.71 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TDK InvenSense |
| Package | LGA-16(3x3) |
| Category | Sensors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nonlinearity (gyroscope) | | -0.1 | | 0.1 | % | Best fit straight line; 25°C | 9 |
| Cross-Axis Sensitivity (gyroscope) | | -5 | | 5 | % | 25°C | 9 |
| Initial ZRO Tolerance (gyroscope) | | -0.8 | | | dps | 25°C | 9 |
| ZRO Variation Over Temperature (gyroscope) | | -1 | | 1 | dps | -40°C to +85°C | 9 |
| Gyroscope Mechanical Frequencies | | 25 | 27 | 29 | KHz | | 9 |
| Gyroscope Low Pass Filter Response Programmable Range | | 5 | | 250 | Hz | Programmable range | 9 |
| Gyroscope Output Data Rate | | 4 | | 8000 | Hz | Programmable, Normal (Filtered) mode | 9 |
| Nonlinearity (accelerometer) | | -0.25 | | 0.25 | % | Best Fit Straight Line for 2g, 25°C | 10 |
| Cross-Axis Sensitivity (accelerometer) | | -5 | | 5 | % | 25°C | 10 |
| Initial Zero-G Tolerance | | -50 | | 50 | mg | All axes, 25°C | 10 |
| Zero-G Level Change vs. Temperature | | -50 | | 50 | mg | -40°C to +85°C | 10 |
| Accelerometer Low Pass Filter Response Programmable Range | | 5 | | 218 | Hz | Programmable range | 10 |
| Accelerometer Output Data Rate, Low power (duty-cycled) | | 0.24 | | 500 | Hz | Low power (duty-cycled) | 10 |
| Accelerometer Output Data Rate, Low noise (active) | | 4 | | 4000 | Hz | Low noise (active) | 10 |
| Supply Voltage VDD | VDD | 1.71 | 1.8 | 3.6 | V | | 11 |
| Supply Voltage VDDIO | VDDIO | 1.71 | 1.8 | 3.6 | V | | 11 |
| Specified Temperature Range | | -40 | | 85 | °C | Performance parameters not applicable beyond Specified Temperature Range | 11 |
| Supply Ramp Time (TRAMP) | TRAMP | 0.01 | | 100 | ms | Monotonic ramp; 10% to 90% of final value | 12 |
| Temperature Sensor Operating Range (Ambient) | | -40 | | 85 | °C | Ambient | 12 |
| Power-On Reset Supply Ramp Time (TRAMP) | TRAMP | 0.01 | | 100 | ms | Valid power-on RESET | 12 |
| Start-up time for register read/write | | 11 | | 100 | ms | From power-up | 12 |
| Digital Input Capacitance (FSYNC, SA0, SPC, SDI, CS) | CI | | | 10 | pF | | 12 |
| VOL.INT, INT Low-Level Output Voltage | VOL.INT | | | 0.1 | V | OPEN=1, 0.3mA sink current | 12 |
| I2C VOL, LOW-Level Output Voltage | VOL | 0 | | 0.4 | V | 3 mA sink current | 12 |
| I2C Output Fall Time (tof) | tof | | | 300 | ns | Cb bus capacitance in pF; 20+0.1Cb | 12 |
| I2C VIL, LOW Level Input Voltage | VIL | -0.5 | | | V | | 12 |
| Clock Frequency Initial Tolerance (gyro inactive) | | -5 | | 5 | % | CLK_SEL=0, 6 or gyro inactive; 25°C | 13 |
| Clock Frequency Initial Tolerance (gyro active) | | -1 | | 1 | % | CLK_SEL=1,2,3,4,5 and gyro active; 25°C | 13 |
| Clock Frequency Variation over Temperature (gyro inactive) | | -10 | | 10 | % | CLK_SEL=0,6 or gyro inactive | 13 |
| Clock Frequency Variation over Temperature (gyro active) | | -1 | | 1 | % | CLK_SEL=1,2,3,4,5 and gyro active | 13 |
| SPI Operating Frequency, Low Speed Characterization | | -10 | | 10 | % | Nominal 100 kHz; all registers read/write | 13 |
| Supply Voltage, VDD (absolute maximum) | VDD | -0.5 | | 4 | V | | 16 |
| Supply Voltage, VDDIO (absolute maximum) | VDDIO | -0.5 | | 4 | V | | 16 |
| REGOUT (absolute maximum) | REGOUT | -0.5 | | 2 | V | | 16 |
| Input Voltage Level (SA0, FSYNC, SCL, SDA) | | -0.5 | | | V | Upper limit printed as VDDIO + 0.5 V | 16 |
| Acceleration (unpowered) | | | | 10000 | g | Any axis, unpowered, 0.2 ms | 16 |
| Operating Temperature Range (absolute maximum) | | -40 | | 85 | °C | | 16 |
| Storage Temperature Range | | -40 | | 125 | °C | | 16 |
| Electrostatic Discharge (HBM) | | | | 2 | kV | HBM | 16 |
| Electrostatic Discharge (MM) | | | | 250 | V | MM | 16 |
| Latch-up | | -100 | | 100 | mA | JEDEC Class II (2), 125°C | 16 |
| Junction-to-ambient thermal resistance | θJA | | 84.58 | | °C/W | Junction-to-ambient | 16 |
| Junction-to-top characterization parameter | ψJT | | 7 | | °C/W | Junction-to-top | 16 |
## CAD (KiCad official)
- Symbol: `IAM-20680HP`
- Footprint: `Package_LGA:LGA-16_3x3mm_P0.5mm`
- 3D model: LGA-16(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `iam-20680hp-etched.step` / `iam-20680hp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iam-20680hp.step` / `iam-20680hp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TDK InvenSense datasheet](docs/iam-20680hp-datasheet.pdf) (52 pp, sha256 `5ad58c71352bfcad`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/iam-20680hp-datasheet.pdf)