main
Ray
Publish 0.1.0
9f0b3dd
HX82C251-P
ZHHXDZ · CAN Transceivers · DIP-8
HX82C251-P from ZHHXDZ, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | input | Transmit data input: a low level drives CANH/CANL dominant and a high level or float leaves the bus recessive, with VIH of 2 V to VCC+0.3 V and VIL of -0.3 V to 0.8 V, and D has an internal pull-up to VCC so the bus stays recessive when D is unpowered. |
| 2 | GND | power_in | Ground supply. |
| 3 | VCC | power_in | Supply voltage, VCC = 5 V ±10% (4.5 V to 5.5 V), as stated in the absolute maximum ratings and operating voltage range. |
| 4 | R | output | Receive data output that reads out data from the bus lines to the CAN controller, with VOH of 4 V to 4.6 V at IO = -2 mA and VOL of 0.2 V to 0.4 V at IO = 2 mA. |
| 5 | Vref | power_in | Common-mode stabilization output, which holds 0.3VCC to 0.7VCC for -500 µA < Io < 500 µA. |
| 6 | CANL | bidirectional | LOW-level CAN bus line, with bus-side port voltage limited to -60 V to +60 V. |
| 7 | CANH | bidirectional | HIGH-level CAN bus line, with bus-side port voltage limited to -60 V to +60 V. |
| 8 | Rs | input | High-speed and standby mode selection: grounding Rs selects high-speed mode, while leaving it unconnected or applying a high level selects standby mode, with the Rs pin limited to -0.3 V to VCC+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | DIP-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 4.5 | 5.5 | V | 2 | ||
| D, R, Rs MCU side port voltage | -0.3 | V | max printed as VCC+0.3 | 2 | |||
| Bus-side port voltage (CANL, CANH, Vref) | -60 | 60 | V | 2 | |||
| Transient voltage, pin 6, 7 | Vtr | -200 | 200 | V | 2 | ||
| storage temperature | -55 | 150 | ℃ | 2 | |||
| ambient temperature | -40 | 85 | ℃ | 2 | |||
| Welding temperature range | 300 | ℃ | 2 | ||||
| CANH output voltage (dominant) | VOH(D) | 2.9 | 3.4 | 4.5 | V | VI=0V,Rs=0V,RL=60Ω,F1、2 | 2 |
| CANL output voltage (dominant) | VOL(D) | 0.8 | 1.5 | V | 2 | ||
| Bus output differential voltage (implicit) | VO(R) | 2 | 2.5 | 3 | V | VI=3V,Rs=0V,RL=60Ω,F1、2 | 2 |
| Bus output differential voltage (dominant) | VOD(D) | 1.5 | 3 | V | VI=0V,Rs=0V,RL=60Ω,F1、2 | 2 | |
| Bus output differential voltage (implicit) | VOD(R) | -0.012 | 0.012 | V | VI=3V,S=0V,F1、2 | 2 | |
| Bus output differential voltage (implicit), no load | VOD(R) | -0.5 | 0.05 | V | VI=3V,Rs=0V,NO LOAD | 2 | |
| Dominant output voltage symmetry | Vdom(TX)sym | -400 | 400 | mV | Vdom(TX)sym=VCC- VCANH VCANL | 2 | |
| Output voltage symmetry | VTXsym | 0.9 | 1.1 | VCC | VTXsym=VCANH+VCANL; printed as 0.9VCC / 1.1VCC | 2 | |
| Common mode output voltage | VOC | 2 | 2.5 | 3 | V | Rs=0V,F8 | 2 |
| CANH short-circuit output current | IOS | -105 | -72 | mA | CANH=-12V,CANL=open,F11 | 2 | |
| CANH short-circuit output current | IOS | 0.36 | 1 | mA | CANH=12V,CANL=open,F11 | 2 | |
| CANL short-circuit output current | IOS | -1 | 0.5 | mA | CANL=-12V,CANH=open,F11 | 2 | |
| CANL short-circuit output current | IOS | 71 | 105 | mA | CANL=12V,CANH=open,F11 | 2 | |
| Hidden output current | IO(R) | -2 | 2.5 | mA | -27V<CANH<32V, 0<VCC<5.25V | 2 | |
| Transmission delay (low to high) | tPLH | 25 | 65 | 120 | ns | Rs=0V,F4 | 2 |
| Transmission delay (high to low) | tPHL | 25 | 45 | 90 | ns | 2 | |
| Explicit timeout | tdom | 300 | 450 | 700 | μs | F10 | 2 |
| Bus wake-up time | tBUS | 0.7 | 5 | μs | 2 | ||
| Positive input threshold | VIT+ | 800 | 900 | mV | S=0V,F5 | 3 | |
| Negative input threshold | VIT- | 500 | 650 | mV | 3 | ||
| Comparator threshold hysteresis interval | VHYS | 100 | 125 | mV | 3 | ||
| High level output voltage | VOH | 4 | 4.6 | V | IO=-2mA,F6 | 3 | |
| Low level output voltage | VOL | 0.2 | 0.4 | V | IO=2Ma,F6 | 3 | |
| CANH, CANL input resistance | RIN | 15 | 30 | 40 | KΩ | D=3V,Rs=0V | 3 |
| CANH, CANL differential input resistors | RID | 30 | 80 | KΩ | 3 | ||
| RI(CANH), RIN(CANL) mismatches | RImatch | -3 | 3 | % | CANH=CANL | 3 | |
| Common mode voltage range | VCOM | -12 | 12 | V | 3 | ||
| Propagation delay (low to high) | tPLH | 60 | 100 | 130 | ns | Rs=0V or VCC,F6 | 3 |
| Propagation delay (high to low) | tPHL | 45 | 70 | 90 | ns | 3 | |
| Loop delay 1, driver input to receiver output, implicit to explicit | Td(LOOP1) | 90 | 190 | ns | Rs=0V,F9 | 3 | |
| Loop delay 2, driver input to receiver output, explicit to implicit | Td(LOOP2) | 90 | 190 | ns | 3 | ||
| Over temperature shutdown | Tj(sd) | 155 | 165 | 180 | ℃ | 3 | |
| Common mode stabilised output voltage | VO | 0.3 | 0.7 | VCC | -500uA<Io<500uA; printed as 0.3VCC / 0.7VCC | 3 | |
| IO(Rs) leakage current | IO(Rs) | -5 | 5 | μA | Rs=2V,-12V<VO<12V | 3 | |
| D port high level input current | IIH(D) | -2 | 2 | μA | VI=VCC | 3 | |
| D port low level input current | IIL(D) | -50 | -10 | μA | VI=0 | 3 | |
| Input high level limit | VIH | 2 | V | max printed as VCC+0.3 | 3 | ||
| Input low level limit | VIL | -0.3 | 0.8 | V | 3 | ||
| Silent mode power consumption | ICC | 5 | 12 | μA | Rs=VCC,VI=VCC | 3 | |
| Dominant power consumption | 50 | 70 | mA | VI=0V,S=0V,LOAD=60Ω | 3 | ||
| Implicit power consumption | 6 | 10 | mA | VI=VCC,S=0V,NO LOAD | 3 | ||
| Explicit and implicit common mode output voltage difference | △VOC | 30 | mV | 2 | |||
| Enable time from listen mode to dominant | tEN | 10 | μs | F7 | 2 | ||
| Differential output rise delay time | tr | 25 | ns | 2 | |||
| Differential output fall delay time | tf | 50 | ns | 2 | |||
| Bus input current at power down | I(OFF) | 5 | μA | CANH or CANL=5V, Other pin=0V | 3 | ||
| CANH, CANL input capacitance to ground | CI | 13 | pF | 3 | |||
| CANH, CANL differential input capacitors | CID | 5 | pF | 3 | |||
| R signal rise time | tr | 8 | ns | 3 | |||
| R signal fall time | tf | 8 | ns | 3 | |||
| Current in D when VCC=0V | IO(off) | 1 | μA | VCC=0V,D=5V | 3 |
CAD (KiCad official)
- Symbol:
HX82C251-P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
hx82c251-p-etched.step/hx82c251-p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx82c251-p.step/hx82c251-p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (9 pp, sha256
e22d9c888e329735, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX82C251-P
**ZHHXDZ** · CAN Transceivers · DIP-8
HX82C251-P from ZHHXDZ, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | input | Transmit data input: a low level drives CANH/CANL dominant and a high level or float leaves the bus recessive, with VIH of 2 V to VCC+0.3 V and VIL of -0.3 V to 0.8 V, and D has an internal pull-up to VCC so the bus stays recessive when D is unpowered. |
| 2 | GND | power_in | Ground supply. |
| 3 | VCC | power_in | Supply voltage, VCC = 5 V ±10% (4.5 V to 5.5 V), as stated in the absolute maximum ratings and operating voltage range. |
| 4 | R | output | Receive data output that reads out data from the bus lines to the CAN controller, with VOH of 4 V to 4.6 V at IO = -2 mA and VOL of 0.2 V to 0.4 V at IO = 2 mA. |
| 5 | Vref | power_in | Common-mode stabilization output, which holds 0.3VCC to 0.7VCC for -500 µA < Io < 500 µA. |
| 6 | CANL | bidirectional | LOW-level CAN bus line, with bus-side port voltage limited to -60 V to +60 V. |
| 7 | CANH | bidirectional | HIGH-level CAN bus line, with bus-side port voltage limited to -60 V to +60 V. |
| 8 | Rs | input | High-speed and standby mode selection: grounding Rs selects high-speed mode, while leaving it unconnected or applying a high level selects standby mode, with the Rs pin limited to -0.3 V to VCC+0.3 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | DIP-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 4.5 | | 5.5 | V | | 2 |
| D, R, Rs MCU side port voltage | | -0.3 | | | V | max printed as VCC+0.3 | 2 |
| Bus-side port voltage (CANL, CANH, Vref) | | -60 | | 60 | V | | 2 |
| Transient voltage, pin 6, 7 | Vtr | -200 | | 200 | V | | 2 |
| storage temperature | | -55 | | 150 | ℃ | | 2 |
| ambient temperature | | -40 | | 85 | ℃ | | 2 |
| Welding temperature range | | | | 300 | ℃ | | 2 |
| CANH output voltage (dominant) | VOH(D) | 2.9 | 3.4 | 4.5 | V | VI=0V,Rs=0V,RL=60Ω,F1、2 | 2 |
| CANL output voltage (dominant) | VOL(D) | 0.8 | | 1.5 | V | | 2 |
| Bus output differential voltage (implicit) | VO(R) | 2 | 2.5 | 3 | V | VI=3V,Rs=0V,RL=60Ω,F1、2 | 2 |
| Bus output differential voltage (dominant) | VOD(D) | 1.5 | | 3 | V | VI=0V,Rs=0V,RL=60Ω,F1、2 | 2 |
| Bus output differential voltage (implicit) | VOD(R) | -0.012 | | 0.012 | V | VI=3V,S=0V,F1、2 | 2 |
| Bus output differential voltage (implicit), no load | VOD(R) | -0.5 | | 0.05 | V | VI=3V,Rs=0V,NO LOAD | 2 |
| Dominant output voltage symmetry | Vdom(TX)sym | -400 | | 400 | mV | Vdom(TX)sym=VCC- VCANH VCANL | 2 |
| Output voltage symmetry | VTXsym | 0.9 | | 1.1 | VCC | VTXsym=VCANH+VCANL; printed as 0.9VCC / 1.1VCC | 2 |
| Common mode output voltage | VOC | 2 | 2.5 | 3 | V | Rs=0V,F8 | 2 |
| CANH short-circuit output current | IOS | -105 | | -72 | mA | CANH=-12V,CANL=open,F11 | 2 |
| CANH short-circuit output current | IOS | 0.36 | | 1 | mA | CANH=12V,CANL=open,F11 | 2 |
| CANL short-circuit output current | IOS | -1 | | 0.5 | mA | CANL=-12V,CANH=open,F11 | 2 |
| CANL short-circuit output current | IOS | 71 | | 105 | mA | CANL=12V,CANH=open,F11 | 2 |
| Hidden output current | IO(R) | -2 | | 2.5 | mA | -27V<CANH<32V, 0<VCC<5.25V | 2 |
| Transmission delay (low to high) | tPLH | 25 | 65 | 120 | ns | Rs=0V,F4 | 2 |
| Transmission delay (high to low) | tPHL | 25 | 45 | 90 | ns | | 2 |
| Explicit timeout | tdom | 300 | 450 | 700 | μs | F10 | 2 |
| Bus wake-up time | tBUS | 0.7 | | 5 | μs | | 2 |
| Positive input threshold | VIT+ | 800 | | 900 | mV | S=0V,F5 | 3 |
| Negative input threshold | VIT- | 500 | | 650 | mV | | 3 |
| Comparator threshold hysteresis interval | VHYS | 100 | | 125 | mV | | 3 |
| High level output voltage | VOH | 4 | | 4.6 | V | IO=-2mA,F6 | 3 |
| Low level output voltage | VOL | 0.2 | | 0.4 | V | IO=2Ma,F6 | 3 |
| CANH, CANL input resistance | RIN | 15 | 30 | 40 | KΩ | D=3V,Rs=0V | 3 |
| CANH, CANL differential input resistors | RID | 30 | | 80 | KΩ | | 3 |
| RI(CANH), RIN(CANL) mismatches | RImatch | -3 | | 3 | % | CANH=CANL | 3 |
| Common mode voltage range | VCOM | -12 | | 12 | V | | 3 |
| Propagation delay (low to high) | tPLH | 60 | 100 | 130 | ns | Rs=0V or VCC,F6 | 3 |
| Propagation delay (high to low) | tPHL | 45 | 70 | 90 | ns | | 3 |
| Loop delay 1, driver input to receiver output, implicit to explicit | Td(LOOP1) | 90 | | 190 | ns | Rs=0V,F9 | 3 |
| Loop delay 2, driver input to receiver output, explicit to implicit | Td(LOOP2) | 90 | | 190 | ns | | 3 |
| Over temperature shutdown | Tj(sd) | 155 | 165 | 180 | ℃ | | 3 |
| Common mode stabilised output voltage | VO | 0.3 | | 0.7 | VCC | -500uA<Io<500uA; printed as 0.3VCC / 0.7VCC | 3 |
| IO(Rs) leakage current | IO(Rs) | -5 | | 5 | μA | Rs=2V,-12V<VO<12V | 3 |
| D port high level input current | IIH(D) | -2 | | 2 | μA | VI=VCC | 3 |
| D port low level input current | IIL(D) | -50 | | -10 | μA | VI=0 | 3 |
| Input high level limit | VIH | 2 | | | V | max printed as VCC+0.3 | 3 |
| Input low level limit | VIL | -0.3 | | 0.8 | V | | 3 |
| Silent mode power consumption | ICC | 5 | | 12 | μA | Rs=VCC,VI=VCC | 3 |
| Dominant power consumption | | 50 | | 70 | mA | VI=0V,S=0V,LOAD=60Ω | 3 |
| Implicit power consumption | | 6 | | 10 | mA | VI=VCC,S=0V,NO LOAD | 3 |
| Explicit and implicit common mode output voltage difference | △VOC | | 30 | | mV | | 2 |
| Enable time from listen mode to dominant | tEN | | 10 | | μs | F7 | 2 |
| Differential output rise delay time | tr | | 25 | | ns | | 2 |
| Differential output fall delay time | tf | | 50 | | ns | | 2 |
| Bus input current at power down | I(OFF) | | 5 | | μA | CANH or CANL=5V, Other pin=0V | 3 |
| CANH, CANL input capacitance to ground | CI | | 13 | | pF | | 3 |
| CANH, CANL differential input capacitors | CID | | 5 | | pF | | 3 |
| R signal rise time | tr | | 8 | | ns | | 3 |
| R signal fall time | tf | | 8 | | ns | | 3 |
| Current in D when VCC=0V | IO(off) | | 1 | | μA | VCC=0V,D=5V | 3 |
## CAD (KiCad official)
- Symbol: `HX82C251-P`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `hx82c251-p-etched.step` / `hx82c251-p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx82c251-p.step` / `hx82c251-p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ZHHXDZ datasheet](docs/hx82c251-p-datasheet.pdf) (9 pp, sha256 `e22d9c888e329735`, retrieved 2026-11-05, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx82c251-p-datasheet.pdf)