Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX82C251-P

ZHHXDZ · CAN Transceivers · DIP-8

HX82C251-P from ZHHXDZ, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D input Transmit data input: a low level drives CANH/CANL dominant and a high level or float leaves the bus recessive, with VIH of 2 V to VCC+0.3 V and VIL of -0.3 V to 0.8 V, and D has an internal pull-up to VCC so the bus stays recessive when D is unpowered.
2 GND power_in Ground supply.
3 VCC power_in Supply voltage, VCC = 5 V ±10% (4.5 V to 5.5 V), as stated in the absolute maximum ratings and operating voltage range.
4 R output Receive data output that reads out data from the bus lines to the CAN controller, with VOH of 4 V to 4.6 V at IO = -2 mA and VOL of 0.2 V to 0.4 V at IO = 2 mA.
5 Vref power_in Common-mode stabilization output, which holds 0.3VCC to 0.7VCC for -500 µA < Io < 500 µA.
6 CANL bidirectional LOW-level CAN bus line, with bus-side port voltage limited to -60 V to +60 V.
7 CANH bidirectional HIGH-level CAN bus line, with bus-side port voltage limited to -60 V to +60 V.
8 Rs input High-speed and standby mode selection: grounding Rs selects high-speed mode, while leaving it unconnected or applying a high level selects standby mode, with the Rs pin limited to -0.3 V to VCC+0.3 V.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package DIP-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC 4.5 5.5 V 2
D, R, Rs MCU side port voltage -0.3 V max printed as VCC+0.3 2
Bus-side port voltage (CANL, CANH, Vref) -60 60 V 2
Transient voltage, pin 6, 7 Vtr -200 200 V 2
storage temperature -55 150 ℃ 2
ambient temperature -40 85 ℃ 2
Welding temperature range 300 ℃ 2
CANH output voltage (dominant) VOH(D) 2.9 3.4 4.5 V VI=0V,Rs=0V,RL=60Ω,F1、2 2
CANL output voltage (dominant) VOL(D) 0.8 1.5 V 2
Bus output differential voltage (implicit) VO(R) 2 2.5 3 V VI=3V,Rs=0V,RL=60Ω,F1、2 2
Bus output differential voltage (dominant) VOD(D) 1.5 3 V VI=0V,Rs=0V,RL=60Ω,F1、2 2
Bus output differential voltage (implicit) VOD(R) -0.012 0.012 V VI=3V,S=0V,F1、2 2
Bus output differential voltage (implicit), no load VOD(R) -0.5 0.05 V VI=3V,Rs=0V,NO LOAD 2
Dominant output voltage symmetry Vdom(TX)sym -400 400 mV Vdom(TX)sym=VCC- VCANH VCANL 2
Output voltage symmetry VTXsym 0.9 1.1 VCC VTXsym=VCANH+VCANL; printed as 0.9VCC / 1.1VCC 2
Common mode output voltage VOC 2 2.5 3 V Rs=0V,F8 2
CANH short-circuit output current IOS -105 -72 mA CANH=-12V,CANL=open,F11 2
CANH short-circuit output current IOS 0.36 1 mA CANH=12V,CANL=open,F11 2
CANL short-circuit output current IOS -1 0.5 mA CANL=-12V,CANH=open,F11 2
CANL short-circuit output current IOS 71 105 mA CANL=12V,CANH=open,F11 2
Hidden output current IO(R) -2 2.5 mA -27V<CANH<32V, 0<VCC<5.25V 2
Transmission delay (low to high) tPLH 25 65 120 ns Rs=0V,F4 2
Transmission delay (high to low) tPHL 25 45 90 ns 2
Explicit timeout tdom 300 450 700 μs F10 2
Bus wake-up time tBUS 0.7 5 μs 2
Positive input threshold VIT+ 800 900 mV S=0V,F5 3
Negative input threshold VIT- 500 650 mV 3
Comparator threshold hysteresis interval VHYS 100 125 mV 3
High level output voltage VOH 4 4.6 V IO=-2mA,F6 3
Low level output voltage VOL 0.2 0.4 V IO=2Ma,F6 3
CANH, CANL input resistance RIN 15 30 40 KΩ D=3V,Rs=0V 3
CANH, CANL differential input resistors RID 30 80 KΩ 3
RI(CANH), RIN(CANL) mismatches RImatch -3 3 % CANH=CANL 3
Common mode voltage range VCOM -12 12 V 3
Propagation delay (low to high) tPLH 60 100 130 ns Rs=0V or VCC,F6 3
Propagation delay (high to low) tPHL 45 70 90 ns 3
Loop delay 1, driver input to receiver output, implicit to explicit Td(LOOP1) 90 190 ns Rs=0V,F9 3
Loop delay 2, driver input to receiver output, explicit to implicit Td(LOOP2) 90 190 ns 3
Over temperature shutdown Tj(sd) 155 165 180 ℃ 3
Common mode stabilised output voltage VO 0.3 0.7 VCC -500uA<Io<500uA; printed as 0.3VCC / 0.7VCC 3
IO(Rs) leakage current IO(Rs) -5 5 μA Rs=2V,-12V<VO<12V 3
D port high level input current IIH(D) -2 2 μA VI=VCC 3
D port low level input current IIL(D) -50 -10 μA VI=0 3
Input high level limit VIH 2 V max printed as VCC+0.3 3
Input low level limit VIL -0.3 0.8 V 3
Silent mode power consumption ICC 5 12 μA Rs=VCC,VI=VCC 3
Dominant power consumption 50 70 mA VI=0V,S=0V,LOAD=60Ω 3
Implicit power consumption 6 10 mA VI=VCC,S=0V,NO LOAD 3
Explicit and implicit common mode output voltage difference △VOC 30 mV 2
Enable time from listen mode to dominant tEN 10 μs F7 2
Differential output rise delay time tr 25 ns 2
Differential output fall delay time tf 50 ns 2
Bus input current at power down I(OFF) 5 μA CANH or CANL=5V, Other pin=0V 3
CANH, CANL input capacitance to ground CI 13 pF 3
CANH, CANL differential input capacitors CID 5 pF 3
R signal rise time tr 8 ns 3
R signal fall time tf 8 ns 3
Current in D when VCC=0V IO(off) 1 μA VCC=0V,D=5V 3

CAD (KiCad official)

  • Symbol: HX82C251-P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hx82c251-p-etched.step / hx82c251-p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx82c251-p.step / hx82c251-p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (9 pp, sha256 e22d9c888e329735, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF