HX65HVD230-S

{
  "slug": "hx65hvd230-s",
  "version": "0.1.0",
  "type": "component",
  "description": "ZHHXDZ CAN Transceivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "hx65hvd230-s",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hx65hvd230-s.kicad_sym",
    "hx65hvd230-s.kicad_mod",
    "hx65hvd230-s.glb",
    "hx65hvd230-s.step",
    "hx65hvd230-s.lbr",
    "docs/hero.png",
    "docs/hx65hvd230-s-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hx65hvd230-s-hero.glb",
    "hx65hvd230-s-hero.overlay.json",
    "hx65hvd230-s-etched.glb"
  ],
  "component": {
    "mpn": "HX65HVD230-S",
    "manufacturer": "ZHHXDZ",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "CAN Transceivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9b6c2762a10cd1abc9a0a99a8c80e980.pdf",
    "parts": {
      "symbol": "hx65hvd230-s.kicad_sym",
      "footprint": "hx65hvd230-s.kicad_mod",
      "model_3d": "hx65hvd230-s-hero.glb",
      "model_3d_plain": "hx65hvd230-s-etched.glb",
      "model_3d_step": "hx65hvd230-s-etched.step",
      "model_3d_step_plain": "hx65hvd230-s.step",
      "lbr": "hx65hvd230-s.lbr"
    },
    "distributor_links": {
      "lcsc": "C48618307"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T15:33:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "D",
        "type": "input",
        "description": "CAN transmit data input (also called TXD, driver input): low for dominant bus state and high for recessive bus state. The datasheet limits MCU-side port voltage to -0.5 V to VCC+0.5 V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for the transceiver; all voltages are referenced to this pin."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Transceiver 3.3 V supply pin; operating range is 3 V to 3.6 V and the absolute maximum rating is -0.3 V to +6 V."
      },
      {
        "number": "4",
        "name": "R",
        "type": "output",
        "description": "CAN receive data output (also called RXD, driver output): low for dominant bus state and high for recessive bus state. The MCU-side port voltage is limited to -0.5 V to VCC+0.5 V and the receiver output current to -11 mA to +11 mA."
      },
      {
        "number": "5",
        "name": "Vref",
        "type": "power_out",
        "description": "Vcc/2 reference voltage output; it stays within 0.45VCC to 0.55VCC for -5 µA < Iref < 5 µA and within 0.4VCC to 0.6VCC for -50 µA < Iref < 50 µA."
      },
      {
        "number": "6",
        "name": "CANL",
        "type": "bidirectional",
        "description": "Low-level CAN bus line; the bus-side input voltage is limited to -18 V to 18 V, and pins 6 and 7 withstand transients of -25 V to +25 V (100 Ω test, see Figure 9)."
      },
      {
        "number": "7",
        "name": "CANH",
        "type": "bidirectional",
        "description": "High-level CAN bus line; the bus-side input voltage is limited to -18 V to 18 V, and pins 6 and 7 withstand transients of -25 V to +25 V (100 Ω test, see Figure 9)."
      },
      {
        "number": "8",
        "name": "RS",
        "type": "input",
        "description": "Mode select pin: strongly pulled to GND selects high-speed mode, strongly pulled to VCC selects standby (low-power) mode, and a 10 kΩ to 100 kΩ resistor to GND selects slope-control mode; standby is entered when the voltage exceeds 0.75 VCC."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives the SOP-8 pinout and lists HX65HVD230-S as an SOP-8 part (ordering table, page 1; Pin 5 (Vref) is classified as power_out and pins 6 and 7 as bidirectional; the datasheet describes t; The datasheet does not state a dedicated pin type for the bus line pins' ERC class; CANL and CANH ar"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0482,
        "at": "2026-10-18T15:31:09"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/9b6c2762a10cd1abc9a0a99a8c80e980.pdf",
        "pages": 12,
        "sha256": "0bd38b46ace059fc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hx65hvd230-s.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hx65hvd230-s-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "95469744732c1d8ccae66be5605ea8436b00388743650837d4427fcccd8c5f89",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}