main
Ray
Publish 0.1.0
6fe7692
HX24LC04BDRG
HANSCHIP semiconductor · EEPROM · SOP-8
HX24LC04BDRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin; the datasheet pin table gives no function for it. |
| 2 | E1 | input | Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating. |
| 3 | E2 | input | Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating. |
| 4 | GND | power_in | Ground reference for the power supply, to be connected to system ground. |
| 5 | SDA | bidirectional | Serial data pin, open-drain bidirectional, used to transfer data to and from the device. |
| 6 | SCL | input | Serial clock input; command and input data on SDA are latched on the rising edge of SCL and output data is clocked out on the falling edge. |
| 7 | WP | input | Write protect input; connected to supply it makes the whole memory read-only, connected to GND enables writes, and it is internally pulled down to GND if left floating. |
| 8 | VCC | power_in | Device power supply, 1.7V to 5.5V; operation at invalid VCC voltages may give spurious results. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature with power applied | TA | -40 | 105 | °C | with power applied | 18 | |
| Storage temperature | TSTG | -65 | 150 | °C | 18 | ||
| Supply voltage | VCC | -0.5 | 6 | V | 18 | ||
| Voltage on input pins | VIN | -0.5 | 6 | V | 18 | ||
| Electrostatic pulse (human body model) | VESD | 6000 | V | human body model | 18 | ||
| Supply Voltage | VCC | 1.7 | 5.5 | V | Operating range TA = -40°C to +105°C | 18 | |
| Supply Current (Read) | ICC1 | 0.1 | mA | VCC= 1.7V, Read at 1MHz | 18 | ||
| Supply Current (Read) | ICC1 | 0.4 | mA | VCC= 5.5V, Read at 400 kHz | 18 | ||
| Supply Current (Read) | ICC1 | 0.5 | mA | VCC= 5.5V, Read at 1MHz | 18 | ||
| Supply Current (Write) | ICC2 | 1 | mA | VCC= 5.5V, Write at 400 kHz | 18 | ||
| Standby Current | ISB | 1 | μA | VCC = 1.7V, VIN = VCC or GND | 18 | ||
| Input Leakage Current | ILI | 1 | μA | VIN = VCC or GND | 18 | ||
| Output Leakage Current | ILO | 1 | μA | VOUT = VCC or GND | 18 | ||
| Low-Level Output Voltage | VOL1 | 0.4 | V | VCC> 2V, IOL= 3mA | 18 | ||
| Low-Level Output Voltage | VOL2 | 0.2 | V | VCC≤2V, IOL= 2mA | 18 | ||
| Power-On Reset Time | tPOR | 10 | ms | 6 | |||
| Power-On Reset Voltage | VPOR | 1.5 | V | 6 | |||
| Brown-out Reset Voltage | VBOR | 0.8 | V | 6 | |||
| Time from Power-On to First Command | tINIT | 10 | ms | 6 | |||
| Warm Power Cycle Off Time | tPOFF | 1 | ms | 6 | |||
| Clock Frequency, SCL (Fast) | fSCL | 400 | kHz | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Clock Frequency, SCL (High Speed) | fSCL | 1000 | kHz | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Clock Pulse Width Low (Fast) | tLOW | 1300 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Clock Pulse Width Low (High Speed) | tLOW | 600 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Clock Pulse Width High (Fast) | tHIGH | 600 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Clock Pulse Width High (High Speed) | tHIGH | 260 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| SDA Rise Time (Fast) | tR | 300 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| SDA Rise Time (High Speed) | tR | 300 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| SDA(Out) Fall Time (Fast) | tF | 300 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| SDA(Out) Fall Time (High Speed) | tF | 100 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Start Hold Time (Fast) | tHD.STA | 600 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Start Hold Time (High Speed) | tHD.STA | 250 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Start Setup Time (Fast) | tSU.STA | 600 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Start Setup Time (High Speed) | tSU.STA | 250 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Stop Setup Time (Fast) | tSU.STO | 600 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Stop Setup Time (High Speed) | tSU.STO | 250 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Bus Free Time between Stop and Next Start (Fast) | tBUF | 1300 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Bus Free Time between Stop and Next Start (High Speed) | tBUF | 500 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Data In Hold Time (Fast) | tHD.DI | 0 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Data In Hold Time (High Speed) | tHD.DI | 0 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Data In Setup Time (Fast) | tSU.DAT | 100 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Data In Setup Time (High Speed) | tSU.DAT | 50 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Data Out Hold Time (Fast) | tHD.DAT | 50 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Data Out Hold Time (High Speed) | tHD.DAT | 50 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| SCL Low to Data Out Valid (Fast) | tAA | 100 | 900 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | |
| SCL Low to Data Out Valid (High Speed) | tAA | 50 | 500 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | |
| WP Pin Setup Time (Fast) | tSU.WP | 1200 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| WP Pin Setup Time (High Speed) | tSU.WP | 600 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| WP Pin Hold Time (Fast) | tHD.WP | 1200 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| WP Pin Hold Time (High Speed) | tHD.WP | 600 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Write Cycle Time (Fast) | tWR | 5 | ms | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Write Cycle Time (High Speed) | tWR | 5 | ms | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Noise Suppression Time (Fast) | tI | 50 | ns | Fast column; VCC = 1.7V to 5.5V | 19 | ||
| Noise Suppression Time (High Speed) | tI | 50 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 | ||
| Input/output Capacitance (SDA) | CI/O | 8 | pF | VI/O = 0V | 20 | ||
| Input Capacitance (other pins) | CIN | 6 | pF | VIN = 0V | 20 | ||
| Data Retention | DR | 200 | year | TA = +25°C | 20 |
CAD (KiCad official)
- Symbol:
HX24LC04BDRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx24lc04bdrg-etched.step/hx24lc04bdrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx24lc04bdrg.step/hx24lc04bdrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (25 pp, sha256
facb7da4679f13a4, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX24LC04BDRG
**HANSCHIP semiconductor** · EEPROM · SOP-8
HX24LC04BDRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin; the datasheet pin table gives no function for it. |
| 2 | E1 | input | Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating. |
| 3 | E2 | input | Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating. |
| 4 | GND | power_in | Ground reference for the power supply, to be connected to system ground. |
| 5 | SDA | bidirectional | Serial data pin, open-drain bidirectional, used to transfer data to and from the device. |
| 6 | SCL | input | Serial clock input; command and input data on SDA are latched on the rising edge of SCL and output data is clocked out on the falling edge. |
| 7 | WP | input | Write protect input; connected to supply it makes the whole memory read-only, connected to GND enables writes, and it is internally pulled down to GND if left floating. |
| 8 | VCC | power_in | Device power supply, 1.7V to 5.5V; operation at invalid VCC voltages may give spurious results. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature with power applied | TA | -40 | | 105 | °C | with power applied | 18 |
| Storage temperature | TSTG | -65 | | 150 | °C | | 18 |
| Supply voltage | VCC | -0.5 | | 6 | V | | 18 |
| Voltage on input pins | VIN | -0.5 | | 6 | V | | 18 |
| Electrostatic pulse (human body model) | VESD | | | 6000 | V | human body model | 18 |
| Supply Voltage | VCC | 1.7 | | 5.5 | V | Operating range TA = -40°C to +105°C | 18 |
| Supply Current (Read) | ICC1 | | | 0.1 | mA | VCC= 1.7V, Read at 1MHz | 18 |
| Supply Current (Read) | ICC1 | | | 0.4 | mA | VCC= 5.5V, Read at 400 kHz | 18 |
| Supply Current (Read) | ICC1 | | | 0.5 | mA | VCC= 5.5V, Read at 1MHz | 18 |
| Supply Current (Write) | ICC2 | | | 1 | mA | VCC= 5.5V, Write at 400 kHz | 18 |
| Standby Current | ISB | | | 1 | μA | VCC = 1.7V, VIN = VCC or GND | 18 |
| Input Leakage Current | ILI | | | 1 | μA | VIN = VCC or GND | 18 |
| Output Leakage Current | ILO | | | 1 | μA | VOUT = VCC or GND | 18 |
| Low-Level Output Voltage | VOL1 | | | 0.4 | V | VCC> 2V, IOL= 3mA | 18 |
| Low-Level Output Voltage | VOL2 | | | 0.2 | V | VCC≤2V, IOL= 2mA | 18 |
| Power-On Reset Time | tPOR | | | 10 | ms | | 6 |
| Power-On Reset Voltage | VPOR | | | 1.5 | V | | 6 |
| Brown-out Reset Voltage | VBOR | 0.8 | | | V | | 6 |
| Time from Power-On to First Command | tINIT | 10 | | | ms | | 6 |
| Warm Power Cycle Off Time | tPOFF | 1 | | | ms | | 6 |
| Clock Frequency, SCL (Fast) | fSCL | | | 400 | kHz | Fast column; VCC = 1.7V to 5.5V | 19 |
| Clock Frequency, SCL (High Speed) | fSCL | | | 1000 | kHz | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Clock Pulse Width Low (Fast) | tLOW | 1300 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Clock Pulse Width Low (High Speed) | tLOW | 600 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Clock Pulse Width High (Fast) | tHIGH | 600 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Clock Pulse Width High (High Speed) | tHIGH | 260 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| SDA Rise Time (Fast) | tR | | | 300 | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| SDA Rise Time (High Speed) | tR | | | 300 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| SDA(Out) Fall Time (Fast) | tF | | | 300 | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| SDA(Out) Fall Time (High Speed) | tF | | | 100 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Start Hold Time (Fast) | tHD.STA | 600 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Start Hold Time (High Speed) | tHD.STA | 250 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Start Setup Time (Fast) | tSU.STA | 600 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Start Setup Time (High Speed) | tSU.STA | 250 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Stop Setup Time (Fast) | tSU.STO | 600 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Stop Setup Time (High Speed) | tSU.STO | 250 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Bus Free Time between Stop and Next Start (Fast) | tBUF | 1300 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Bus Free Time between Stop and Next Start (High Speed) | tBUF | 500 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Data In Hold Time (Fast) | tHD.DI | 0 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Data In Hold Time (High Speed) | tHD.DI | 0 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Data In Setup Time (Fast) | tSU.DAT | 100 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Data In Setup Time (High Speed) | tSU.DAT | 50 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Data Out Hold Time (Fast) | tHD.DAT | 50 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Data Out Hold Time (High Speed) | tHD.DAT | 50 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| SCL Low to Data Out Valid (Fast) | tAA | 100 | | 900 | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| SCL Low to Data Out Valid (High Speed) | tAA | 50 | | 500 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| WP Pin Setup Time (Fast) | tSU.WP | 1200 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| WP Pin Setup Time (High Speed) | tSU.WP | 600 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| WP Pin Hold Time (Fast) | tHD.WP | 1200 | | | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| WP Pin Hold Time (High Speed) | tHD.WP | 600 | | | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Write Cycle Time (Fast) | tWR | | | 5 | ms | Fast column; VCC = 1.7V to 5.5V | 19 |
| Write Cycle Time (High Speed) | tWR | | | 5 | ms | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Noise Suppression Time (Fast) | tI | | | 50 | ns | Fast column; VCC = 1.7V to 5.5V | 19 |
| Noise Suppression Time (High Speed) | tI | | | 50 | ns | High Speed column; VCC = 1.7V to 5.5V | 19 |
| Input/output Capacitance (SDA) | CI/O | | | 8 | pF | VI/O = 0V | 20 |
| Input Capacitance (other pins) | CIN | | | 6 | pF | VIN = 0V | 20 |
| Data Retention | DR | 200 | | | year | TA = +25°C | 20 |
## CAD (KiCad official)
- Symbol: `HX24LC04BDRG`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hx24lc04bdrg-etched.step` / `hx24lc04bdrg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx24lc04bdrg.step` / `hx24lc04bdrg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](docs/hx24lc04bdrg-datasheet.pdf) (25 pp, sha256 `facb7da4679f13a4`, retrieved 2026-11-04, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx24lc04bdrg-datasheet.pdf)