Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX24LC04BDRG

HANSCHIP semiconductor · EEPROM · SOP-8

HX24LC04BDRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect pin; the datasheet pin table gives no function for it.
2 E1 input Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating.
3 E2 input Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating.
4 GND power_in Ground reference for the power supply, to be connected to system ground.
5 SDA bidirectional Serial data pin, open-drain bidirectional, used to transfer data to and from the device.
6 SCL input Serial clock input; command and input data on SDA are latched on the rising edge of SCL and output data is clocked out on the falling edge.
7 WP input Write protect input; connected to supply it makes the whole memory read-only, connected to GND enables writes, and it is internally pulled down to GND if left floating.
8 VCC power_in Device power supply, 1.7V to 5.5V; operation at invalid VCC voltages may give spurious results.

Key specifications

Parameter Value
Manufacturer HANSCHIP semiconductor
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature with power applied TA -40 105 °C with power applied 18
Storage temperature TSTG -65 150 °C 18
Supply voltage VCC -0.5 6 V 18
Voltage on input pins VIN -0.5 6 V 18
Electrostatic pulse (human body model) VESD 6000 V human body model 18
Supply Voltage VCC 1.7 5.5 V Operating range TA = -40°C to +105°C 18
Supply Current (Read) ICC1 0.1 mA VCC= 1.7V, Read at 1MHz 18
Supply Current (Read) ICC1 0.4 mA VCC= 5.5V, Read at 400 kHz 18
Supply Current (Read) ICC1 0.5 mA VCC= 5.5V, Read at 1MHz 18
Supply Current (Write) ICC2 1 mA VCC= 5.5V, Write at 400 kHz 18
Standby Current ISB 1 μA VCC = 1.7V, VIN = VCC or GND 18
Input Leakage Current ILI 1 μA VIN = VCC or GND 18
Output Leakage Current ILO 1 μA VOUT = VCC or GND 18
Low-Level Output Voltage VOL1 0.4 V VCC> 2V, IOL= 3mA 18
Low-Level Output Voltage VOL2 0.2 V VCC≤2V, IOL= 2mA 18
Power-On Reset Time tPOR 10 ms 6
Power-On Reset Voltage VPOR 1.5 V 6
Brown-out Reset Voltage VBOR 0.8 V 6
Time from Power-On to First Command tINIT 10 ms 6
Warm Power Cycle Off Time tPOFF 1 ms 6
Clock Frequency, SCL (Fast) fSCL 400 kHz Fast column; VCC = 1.7V to 5.5V 19
Clock Frequency, SCL (High Speed) fSCL 1000 kHz High Speed column; VCC = 1.7V to 5.5V 19
Clock Pulse Width Low (Fast) tLOW 1300 ns Fast column; VCC = 1.7V to 5.5V 19
Clock Pulse Width Low (High Speed) tLOW 600 ns High Speed column; VCC = 1.7V to 5.5V 19
Clock Pulse Width High (Fast) tHIGH 600 ns Fast column; VCC = 1.7V to 5.5V 19
Clock Pulse Width High (High Speed) tHIGH 260 ns High Speed column; VCC = 1.7V to 5.5V 19
SDA Rise Time (Fast) tR 300 ns Fast column; VCC = 1.7V to 5.5V 19
SDA Rise Time (High Speed) tR 300 ns High Speed column; VCC = 1.7V to 5.5V 19
SDA(Out) Fall Time (Fast) tF 300 ns Fast column; VCC = 1.7V to 5.5V 19
SDA(Out) Fall Time (High Speed) tF 100 ns High Speed column; VCC = 1.7V to 5.5V 19
Start Hold Time (Fast) tHD.STA 600 ns Fast column; VCC = 1.7V to 5.5V 19
Start Hold Time (High Speed) tHD.STA 250 ns High Speed column; VCC = 1.7V to 5.5V 19
Start Setup Time (Fast) tSU.STA 600 ns Fast column; VCC = 1.7V to 5.5V 19
Start Setup Time (High Speed) tSU.STA 250 ns High Speed column; VCC = 1.7V to 5.5V 19
Stop Setup Time (Fast) tSU.STO 600 ns Fast column; VCC = 1.7V to 5.5V 19
Stop Setup Time (High Speed) tSU.STO 250 ns High Speed column; VCC = 1.7V to 5.5V 19
Bus Free Time between Stop and Next Start (Fast) tBUF 1300 ns Fast column; VCC = 1.7V to 5.5V 19
Bus Free Time between Stop and Next Start (High Speed) tBUF 500 ns High Speed column; VCC = 1.7V to 5.5V 19
Data In Hold Time (Fast) tHD.DI 0 ns Fast column; VCC = 1.7V to 5.5V 19
Data In Hold Time (High Speed) tHD.DI 0 ns High Speed column; VCC = 1.7V to 5.5V 19
Data In Setup Time (Fast) tSU.DAT 100 ns Fast column; VCC = 1.7V to 5.5V 19
Data In Setup Time (High Speed) tSU.DAT 50 ns High Speed column; VCC = 1.7V to 5.5V 19
Data Out Hold Time (Fast) tHD.DAT 50 ns Fast column; VCC = 1.7V to 5.5V 19
Data Out Hold Time (High Speed) tHD.DAT 50 ns High Speed column; VCC = 1.7V to 5.5V 19
SCL Low to Data Out Valid (Fast) tAA 100 900 ns Fast column; VCC = 1.7V to 5.5V 19
SCL Low to Data Out Valid (High Speed) tAA 50 500 ns High Speed column; VCC = 1.7V to 5.5V 19
WP Pin Setup Time (Fast) tSU.WP 1200 ns Fast column; VCC = 1.7V to 5.5V 19
WP Pin Setup Time (High Speed) tSU.WP 600 ns High Speed column; VCC = 1.7V to 5.5V 19
WP Pin Hold Time (Fast) tHD.WP 1200 ns Fast column; VCC = 1.7V to 5.5V 19
WP Pin Hold Time (High Speed) tHD.WP 600 ns High Speed column; VCC = 1.7V to 5.5V 19
Write Cycle Time (Fast) tWR 5 ms Fast column; VCC = 1.7V to 5.5V 19
Write Cycle Time (High Speed) tWR 5 ms High Speed column; VCC = 1.7V to 5.5V 19
Noise Suppression Time (Fast) tI 50 ns Fast column; VCC = 1.7V to 5.5V 19
Noise Suppression Time (High Speed) tI 50 ns High Speed column; VCC = 1.7V to 5.5V 19
Input/output Capacitance (SDA) CI/O 8 pF VI/O = 0V 20
Input Capacitance (other pins) CIN 6 pF VIN = 0V 20
Data Retention DR 200 year TA = +25°C 20

CAD (KiCad official)

  • Symbol: HX24LC04BDRG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx24lc04bdrg-etched.step / hx24lc04bdrg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx24lc04bdrg.step / hx24lc04bdrg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HANSCHIP semiconductor datasheet (25 pp, sha256 facb7da4679f13a4, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF