main
Ray
hx24c64drg: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ea32066
HX24C64DRG
HANSCHIP semiconductor · EEPROM · SOP-8
HX24C64DRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Hard-wired by the user to set one of up to eight unique device addresses on a shared two-wire bus. Compared against A0 bit in the device address word. |
| 2 | A1 | input | Device address input bit 1. Hard-wired to set part of the 3-bit device address that identifies this EEPROM on a multi-drop two-wire bus. |
| 3 | A2 | input | Device address input bit 2. Hard-wired to set part of the 3-bit device address. Up to eight HX24C64 devices may share one two-wire bus. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial Data. Bi-directional open-drain data line for the two-wire (I2C-compatible) interface; requires an external pull-up resistor to VCC. May be wire-ORed with other open-drain/open-collector devices on the bus. Input capacitance 8 pF typ. |
| 6 | SCL | input | Serial Clock Input. Positive edge clocks data into the EEPROM and negative edge clocks data out. Schmitt-trigger, filtered for noise suppression. Up to 1 MHz at 5V, 400 kHz at 1.8/2.5/2.7V. |
| 7 | WP | input | Write Protect. When tied to GND, normal read/write operations are allowed. When tied to VCC, the entire 64K array is write-protected in hardware. |
| 8 | VCC | power_in | Positive supply. Operating range 1.8V to 5.5V. Read Icc typ 0.4 mA, write Icc typ 2.0 mA at 5V/100 kHz; standby current 2 µA max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HX24C64DRGHX24C64DRG4HX24C64DRGPGHX24C64DRGDGKRG
CAD (KiCad official)
- Symbol:
HX24C64DRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx24c64drg-etched.step/hx24c64drg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx24c64drg.step/hx24c64drg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (13 pp, sha256
94bde4c4e9bcef51, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX24C64DRG
**HANSCHIP semiconductor** · EEPROM · SOP-8
HX24C64DRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Hard-wired by the user to set one of up to eight unique device addresses on a shared two-wire bus. Compared against A0 bit in the device address word. |
| 2 | A1 | input | Device address input bit 1. Hard-wired to set part of the 3-bit device address that identifies this EEPROM on a multi-drop two-wire bus. |
| 3 | A2 | input | Device address input bit 2. Hard-wired to set part of the 3-bit device address. Up to eight HX24C64 devices may share one two-wire bus. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial Data. Bi-directional open-drain data line for the two-wire (I2C-compatible) interface; requires an external pull-up resistor to VCC. May be wire-ORed with other open-drain/open-collector devices on the bus. Input capacitance 8 pF typ. |
| 6 | SCL | input | Serial Clock Input. Positive edge clocks data into the EEPROM and negative edge clocks data out. Schmitt-trigger, filtered for noise suppression. Up to 1 MHz at 5V, 400 kHz at 1.8/2.5/2.7V. |
| 7 | WP | input | Write Protect. When tied to GND, normal read/write operations are allowed. When tied to VCC, the entire 64K array is write-protected in hardware. |
| 8 | VCC | power_in | Positive supply. Operating range 1.8V to 5.5V. Read Icc typ 0.4 mA, write Icc typ 2.0 mA at 5V/100 kHz; standby current 2 µA max. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HX24C64DRG`
- `HX24C64DRG4`
- `HX24C64DRGPG`
- `HX24C64DRGDGKRG`
## CAD (KiCad official)
- Symbol: `HX24C64DRG`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hx24c64drg-etched.step` / `hx24c64drg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx24c64drg.step` / `hx24c64drg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HANSCHIP semiconductor datasheet](docs/hx24c64drg-datasheet.pdf) (13 pp, sha256 `94bde4c4e9bcef51`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx24c64drg-datasheet.pdf)