main
Ray Publish 0.1.0 e348f05
{
  "slug": "hx232-s",
  "version": "0.1.0",
  "type": "component",
  "description": "ZHHXDZ RS232 ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "hx232-s",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hx232-s.kicad_sym",
    "hx232-s.kicad_mod",
    "hx232-s.glb",
    "hx232-s.step",
    "hx232-s.lbr",
    "docs/hero.png",
    "docs/hx232-s-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hx232-s-hero.glb",
    "hx232-s-hero.overlay.json",
    "hx232-s-etched.glb"
  ],
  "component": {
    "mpn": "HX232-S",
    "manufacturer": "ZHHXDZ",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921478420983808",
    "parts": {
      "symbol": "hx232-s.kicad_sym",
      "footprint": "hx232-s.kicad_mod",
      "model_3d": "hx232-s-hero.glb",
      "model_3d_plain": "hx232-s-etched.glb",
      "model_3d_step": "hx232-s-etched.step",
      "model_3d_step_plain": "hx232-s.step",
      "lbr": "hx232-s.lbr"
    },
    "distributor_links": {
      "lcsc": "C20625118"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T21:03:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive lead of the C1 charge-pump capacitor, which connects between C1+ and C1- and is specified with C1 to C4 = 1µF/16V in the electrical characteristics conditions."
      },
      {
        "number": "2",
        "name": "VS+",
        "type": "power_in",
        "description": "Positive charge-pump output for the storage capacitor only, which the converter description puts at about +10V unloaded and not regulated."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative lead of the C1 charge-pump capacitor, connected between C1+ and C1-."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive lead of the C2 charge-pump capacitor, which inverts the +10V to -10V on the V- output."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "Negative lead of the C2 charge-pump capacitor, connected between C2+ and C2-."
      },
      {
        "number": "6",
        "name": "VS-",
        "type": "power_in",
        "description": "Negative charge-pump output for the storage capacitor only, which the converter description puts at about -10V unloaded and not regulated."
      },
      {
        "number": "7",
        "name": "T2OUT",
        "type": "output",
        "description": "RS-232 line driver 2 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description."
      },
      {
        "number": "8",
        "name": "R2IN",
        "type": "input",
        "description": "RS-232 line receiver 2 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor."
      },
      {
        "number": "9",
        "name": "R2OUT",
        "type": "output",
        "description": "Logic-level data output of receiver 2 to the UART."
      },
      {
        "number": "10",
        "name": "T2IN",
        "type": "input",
        "description": "Logic-level data input of driver 2 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC."
      },
      {
        "number": "11",
        "name": "T1IN",
        "type": "input",
        "description": "Logic-level data input of driver 1 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC."
      },
      {
        "number": "12",
        "name": "R1OUT",
        "type": "output",
        "description": "Logic-level data output of receiver 1 to the UART."
      },
      {
        "number": "13",
        "name": "R1IN",
        "type": "input",
        "description": "RS-232 line receiver 1 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor."
      },
      {
        "number": "14",
        "name": "T1OUT",
        "type": "output",
        "description": "RS-232 line driver 1 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, to be connected to an external +5V supply (VCC = +5V ±5% in the electrical characteristics)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table on page 2 covers the whole HX232-S series (the text lists DIP16, SOP16, SOP16(W) and T; The datasheet gives the type of C1+, C1-, C2+ and C2- as a dash, not an ERC class. They are entered ; The datasheet names the charge-pump outputs VS+ and VS- in the pin table and V+ and V- in the text. "
        ],
        "pages_sent": 5,
        "cost_usd": 0.0351,
        "at": "2026-10-18T21:03:41"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921478420983808",
        "pages": 5,
        "sha256": "dffe44d9dc464236",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hx232-s.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hx232-s-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "02b4c04873d3b633870d6fb0cf9c498acb18b54665f0f5b149230e555cdfca7d",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}