Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX232-S

ZHHXDZ · RS232 ICs · SOP-16

HX232-S from ZHHXDZ, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of the C1 charge-pump capacitor, which connects between C1+ and C1- and is specified with C1 to C4 = 1µF/16V in the electrical characteristics conditions.
2 VS+ power_in Positive charge-pump output for the storage capacitor only, which the converter description puts at about +10V unloaded and not regulated.
3 C1- passive Negative lead of the C1 charge-pump capacitor, connected between C1+ and C1-.
4 C2+ passive Positive lead of the C2 charge-pump capacitor, which inverts the +10V to -10V on the V- output.
5 C2- passive Negative lead of the C2 charge-pump capacitor, connected between C2+ and C2-.
6 VS- power_in Negative charge-pump output for the storage capacitor only, which the converter description puts at about -10V unloaded and not regulated.
7 T2OUT output RS-232 line driver 2 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description.
8 R2IN input RS-232 line receiver 2 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor.
9 R2OUT output Logic-level data output of receiver 2 to the UART.
10 T2IN input Logic-level data input of driver 2 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC.
11 T1IN input Logic-level data input of driver 1 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC.
12 R1OUT output Logic-level data output of receiver 1 to the UART.
13 R1IN input RS-232 line receiver 1 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor.
14 T1OUT output RS-232 line driver 1 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description.
15 GND power_in Ground reference for the device.
16 VCC power_in Supply voltage, to be connected to an external +5V supply (VCC = +5V ±5% in the electrical characteristics).

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.3 6 V 2
Positive supply voltage (V+) V+ 14 V Note 1 2
Negative supply voltage (V-) V- -14 0.3 V Note 1 2
Input voltage, logic input VIN -0.3 V TIN 2
Input voltage, RS-232 receiver input VIN -30 30 V RIN 2
Output voltage, logic output VOUT -0.3 V ROUT 2
Driver/Receiver output continuous power dissipation (SOP16) P 660 mW SOP16, derate 8.70mW/°C above +70°C 2
Operating temperature range Totr -40 85 ℃ 2
Storage temperature range Tstg -45 125 ℃ 2
Lead temperature, soldering TLT 300 ℃ Soldering, 10s 2
Soldering temperature, reflow TST 225 ℃ Reflow 2
Soldering temperature, lead-free packages Tf 260 ℃ All other lead(Pb)-free packages 2
Soldering temperature, packages containing lead Tc 240 ℃ All other packages containing lead(Pb) 2
Output voltage swing -5 5 V All transmitter outputs loaded with 3kΩ to ground 3
VCC supply current 8 mA No load, TA = +25°C 3
Logic pullup current 1.5 µA VTIN = 0V 3
Receiver input voltage operating range -30 V 3
RS-232 input hysteresis 0.2 V VCC = +5V, no hysteresis in shutdown 3
RS-232 input resistance 3 kΩ TA = +25°C, VCC = +5V 3
TTL/CMOS output voltage low 0.4 V IOUT = 1.6mA (IOUT = 3.2mA) 3
TTL/CMOS output voltage high 3.5 V IOUT = - 1mA 3
Transition region slew rate 4 V/µs TA = +25°C, VCC = +5V 3
Transmitter output resistance 300 Ω VCC = V+ = V- = 0V, VOUT = ±2V 3
Transmitter output short-circuit current -10 10 mA 3

CAD (KiCad official)

  • Symbol: HX232-S
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: hx232-s-etched.step / hx232-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx232-s.step / hx232-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (5 pp, sha256 dffe44d9dc464236, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF