main
Ray
Publish 0.1.0
e348f05
HX232-S
ZHHXDZ · RS232 ICs · SOP-16
HX232-S from ZHHXDZ, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which connects between C1+ and C1- and is specified with C1 to C4 = 1µF/16V in the electrical characteristics conditions. |
| 2 | VS+ | power_in | Positive charge-pump output for the storage capacitor only, which the converter description puts at about +10V unloaded and not regulated. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor, connected between C1+ and C1-. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which inverts the +10V to -10V on the V- output. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor, connected between C2+ and C2-. |
| 6 | VS- | power_in | Negative charge-pump output for the storage capacitor only, which the converter description puts at about -10V unloaded and not regulated. |
| 7 | T2OUT | output | RS-232 line driver 2 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description. |
| 8 | R2IN | input | RS-232 line receiver 2 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor. |
| 9 | R2OUT | output | Logic-level data output of receiver 2 to the UART. |
| 10 | T2IN | input | Logic-level data input of driver 2 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC. |
| 11 | T1IN | input | Logic-level data input of driver 1 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC. |
| 12 | R1OUT | output | Logic-level data output of receiver 1 to the UART. |
| 13 | R1IN | input | RS-232 line receiver 1 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor. |
| 14 | T1OUT | output | RS-232 line driver 1 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage, to be connected to an external +5V supply (VCC = +5V ±5% in the electrical characteristics). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.3 | 6 | V | 2 | ||
| Positive supply voltage (V+) | V+ | 14 | V | Note 1 | 2 | ||
| Negative supply voltage (V-) | V- | -14 | 0.3 | V | Note 1 | 2 | |
| Input voltage, logic input | VIN | -0.3 | V | TIN | 2 | ||
| Input voltage, RS-232 receiver input | VIN | -30 | 30 | V | RIN | 2 | |
| Output voltage, logic output | VOUT | -0.3 | V | ROUT | 2 | ||
| Driver/Receiver output continuous power dissipation (SOP16) | P | 660 | mW | SOP16, derate 8.70mW/°C above +70°C | 2 | ||
| Operating temperature range | Totr | -40 | 85 | ℃ | 2 | ||
| Storage temperature range | Tstg | -45 | 125 | ℃ | 2 | ||
| Lead temperature, soldering | TLT | 300 | ℃ | Soldering, 10s | 2 | ||
| Soldering temperature, reflow | TST | 225 | ℃ | Reflow | 2 | ||
| Soldering temperature, lead-free packages | Tf | 260 | ℃ | All other lead(Pb)-free packages | 2 | ||
| Soldering temperature, packages containing lead | Tc | 240 | ℃ | All other packages containing lead(Pb) | 2 | ||
| Output voltage swing | -5 | 5 | V | All transmitter outputs loaded with 3kΩ to ground | 3 | ||
| VCC supply current | 8 | mA | No load, TA = +25°C | 3 | |||
| Logic pullup current | 1.5 | µA | VTIN = 0V | 3 | |||
| Receiver input voltage operating range | -30 | V | 3 | ||||
| RS-232 input hysteresis | 0.2 | V | VCC = +5V, no hysteresis in shutdown | 3 | |||
| RS-232 input resistance | 3 | kΩ | TA = +25°C, VCC = +5V | 3 | |||
| TTL/CMOS output voltage low | 0.4 | V | IOUT = 1.6mA (IOUT = 3.2mA) | 3 | |||
| TTL/CMOS output voltage high | 3.5 | V | IOUT = - 1mA | 3 | |||
| Transition region slew rate | 4 | V/µs | TA = +25°C, VCC = +5V | 3 | |||
| Transmitter output resistance | 300 | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 | |||
| Transmitter output short-circuit current | -10 | 10 | mA | 3 |
CAD (KiCad official)
- Symbol:
HX232-S - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
hx232-s-etched.step/hx232-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx232-s.step/hx232-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (5 pp, sha256
dffe44d9dc464236, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HX232-S
**ZHHXDZ** · RS232 ICs · SOP-16
HX232-S from ZHHXDZ, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which connects between C1+ and C1- and is specified with C1 to C4 = 1µF/16V in the electrical characteristics conditions. |
| 2 | VS+ | power_in | Positive charge-pump output for the storage capacitor only, which the converter description puts at about +10V unloaded and not regulated. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor, connected between C1+ and C1-. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which inverts the +10V to -10V on the V- output. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor, connected between C2+ and C2-. |
| 6 | VS- | power_in | Negative charge-pump output for the storage capacitor only, which the converter description puts at about -10V unloaded and not regulated. |
| 7 | T2OUT | output | RS-232 line driver 2 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description. |
| 8 | R2IN | input | RS-232 line receiver 2 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor. |
| 9 | R2OUT | output | Logic-level data output of receiver 2 to the UART. |
| 10 | T2IN | input | Logic-level data input of driver 2 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC. |
| 11 | T1IN | input | Logic-level data input of driver 1 from the UART, compatible with TTL and CMOS thresholds and with an internal 400kΩ pull-up to VCC. |
| 12 | R1OUT | output | Logic-level data output of receiver 1 to the UART. |
| 13 | R1IN | input | RS-232 line receiver 1 input from the remote RS-232 system, with input over voltages up to ±25V and a nominal 5kΩ terminating resistor. |
| 14 | T1OUT | output | RS-232 line driver 1 output to the remote RS-232 system, which swings about ±5V minimum loaded with 3kΩ and up to ±15V per the driver description. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage, to be connected to an external +5V supply (VCC = +5V ±5% in the electrical characteristics). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.3 | | 6 | V | | 2 |
| Positive supply voltage (V+) | V+ | | | 14 | V | Note 1 | 2 |
| Negative supply voltage (V-) | V- | -14 | | 0.3 | V | Note 1 | 2 |
| Input voltage, logic input | VIN | -0.3 | | | V | TIN | 2 |
| Input voltage, RS-232 receiver input | VIN | -30 | | 30 | V | RIN | 2 |
| Output voltage, logic output | VOUT | -0.3 | | | V | ROUT | 2 |
| Driver/Receiver output continuous power dissipation (SOP16) | P | | | 660 | mW | SOP16, derate 8.70mW/°C above +70°C | 2 |
| Operating temperature range | Totr | -40 | | 85 | ℃ | | 2 |
| Storage temperature range | Tstg | -45 | | 125 | ℃ | | 2 |
| Lead temperature, soldering | TLT | | | 300 | ℃ | Soldering, 10s | 2 |
| Soldering temperature, reflow | TST | | | 225 | ℃ | Reflow | 2 |
| Soldering temperature, lead-free packages | Tf | | | 260 | ℃ | All other lead(Pb)-free packages | 2 |
| Soldering temperature, packages containing lead | Tc | | | 240 | ℃ | All other packages containing lead(Pb) | 2 |
| Output voltage swing | | -5 | | 5 | V | All transmitter outputs loaded with 3kΩ to ground | 3 |
| VCC supply current | | 8 | | | mA | No load, TA = +25°C | 3 |
| Logic pullup current | | 1.5 | | | µA | VTIN = 0V | 3 |
| Receiver input voltage operating range | | -30 | | | V | | 3 |
| RS-232 input hysteresis | | 0.2 | | | V | VCC = +5V, no hysteresis in shutdown | 3 |
| RS-232 input resistance | | 3 | | | kΩ | TA = +25°C, VCC = +5V | 3 |
| TTL/CMOS output voltage low | | 0.4 | | | V | IOUT = 1.6mA (IOUT = 3.2mA) | 3 |
| TTL/CMOS output voltage high | | 3.5 | | | V | IOUT = - 1mA | 3 |
| Transition region slew rate | | 4 | | | V/µs | TA = +25°C, VCC = +5V | 3 |
| Transmitter output resistance | | 300 | | | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 |
| Transmitter output short-circuit current | | -10 | | 10 | mA | | 3 |
## CAD (KiCad official)
- Symbol: `HX232-S`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `hx232-s-etched.step` / `hx232-s-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hx232-s.step` / `hx232-s.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ZHHXDZ datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921478420983808) (5 pp, sha256 `dffe44d9dc464236`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hx232-s-datasheet.pdf)