Generated by kicad-footprint-generator · KiCad file format 20260206
HX13085-S
ZHHXDZ · RS-485 / RS-422 ICs · SOP-8
HX13085-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver data output, which is high when A-B is -50mV or more positive or when the receiver inputs are open or shorted, and low when A-B is -200mV. |
| 2 | RE | input | Receiver enable input: the receiver is active when RE is low, and RO is high-impedance when RE is high. |
| 3 | DE | input | Driver enable input: a high level enables the driver (transmit state), and when both DE and RE are low the chip is in receive state with the driver outputs in high-impedance. |
| 4 | DI | input | Driver data input: with DE high, a high DI drives A high and B low, and a low DI drives A low and B high. |
| 5 | GND | power_in | Ground reference; all voltages are referenced to this pin. |
| 6 | A | bidirectional | Driver differential output and receiver differential input (non-inverting bus line), which is high-impedance when the driver is disabled. |
| 7 | B | bidirectional | Driver differential output and receiver differential input (inverting bus line), which is high-impedance when the driver is disabled. |
| 8 | Vcc | power_in | Power supply, 5V ±5% (4.5V to 5.5V) as stated for the working voltage range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (working range) | Vcc | 4.5 | 5.5 | V | 2 | ||
| Differential output voltage change when DI changes | ΔVOD | 0.2 | V | 2 | |||
| Common-mode output voltage change when DI changes | ΔVOC | 0.2 | V | 2 | |||
| Input high voltage | VIH | 2 | V | DE, RE, DI | 2 | ||
| Input low voltage | VIL | 0.8 | V | DE, RE, DI | 2 | ||
| Input current (DE, RE, DI) | IIN1 | -2 | 2 | uA | DE, RE, DI | 2 | |
| Receiver differential input threshold voltage | VTH | -200 | -50 | mV | -7V≤VCM≤+12V | 2 | |
| Receiver differential threshold hysteresis | ΔVTH | 25 | mV | 2 | |||
| Receiver output high voltage | VOH | 4 | V | IO=-8mA | 2 | ||
| Receiver output low voltage | VOL | 0.4 | V | IO=8mA | 2 | ||
| Receiver output leakage current (tri-state) | IOZR | 1 | uA | 0.4V≤Vo≤2.4V | 2 | ||
| Receiver input resistance | RIN | 96 | kΩ | 2 | |||
| No load operating current | ICC | 480 | 600 | uA | RE=DI=GND or Vcc, DE=Vcc | 2 | |
| Receiver output short-circuit current | IOSR | 95 | mA | 0V≤VRO≤Vcc | 2 | ||
| ESD protection between A/B (human body model) | -15 | 15 | kV | Between A/B, human body mode | 2 | ||
| Driver enable to output high time | tDZH | 150 | nS | CL=100pF, Figure 4,6, S2 closed | 2 | ||
| Driver enable to output low time | tDZL | 150 | nS | CL=100pF, Figure 4,6, S1 closed | 2 | ||
| Driver high to off time | tDHZ | 100 | nS | CL=15pF, Figure 4,6, S1 closed | 2 | ||
| Driver low to off time | tDLZ | 100 | nS | CL=15pF, Figure 4,6, S2 closed | 2 | ||
| Driver rise and fall time | tDR, tDF | 25 | nS | Figure 3,5 | 2 | ||
| Receiver input to output delay (low to high) | tRPLH | 150 | nS | /VID/≥2.0V; rising and falling time≤15nS, Figure 7,9 | 2 | ||
| Receiver input to output delay (high to low) | tRPHL | 150 | nS | /VID/≥2.0V; rising and falling time≤15nS, Figure 7,9 | 2 | ||
| Receiver differential output skew | tRSKEW | -10 | 10 | nS | Figure 2,8 | 2 | |
| Receiver enable to output low time | tRZL | 50 | nS | CL=100pF, Figure 2,8 | 2 | ||
| Receiver enable to output high time | tRZH | 50 | nS | CL=100pF, Figure 2,8 | 2 | ||
| Receiver low to off time | tRLZ | 50 | nS | CL=100pF, Figure 2,8 | 2 | ||
| Receiver high to off time | tRHZ | 50 | nS | CL=100pF, Figure 2,8 | 2 | ||
| Storage temperature range | TSTG | -55 | 150 | ℃ | 2 | ||
| Operating temperature range | TOP | -40 | 85 | ℃ | 2 | ||
| Maximum operating temperature range | TMOP | -55 | 125 | ℃ | 2 | ||
| Power dissipation | PD | 470 | mW | SOP-8 (+70℃ or above) | 2 | ||
| Solder temperature | TL | 300 | ℃ | 10 seconds | 2 | ||
| Supply voltage (absolute maximum) | VCC | -0.5 | 6 | V | 2 | ||
| Control input voltage (DE, RE) | DE,RE | -0.3 | 6 | V | 2 | ||
| Drive input voltage | DI | -0.3 | 6 | V | 2 | ||
| Drive output voltage / receive input voltage (bus pins) | A,B | -7 | 12 | V | 2 | ||
| Receiving output voltage | RO | -0.3 | 6 | V | 2 |
CAD (KiCad official)
- Symbol:
HX13085-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx13085-s-etched.step/hx13085-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx13085-s.step/hx13085-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (4 pp, sha256
0b58dd5b292de8e7, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).