Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX13085-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX13085-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver data output, which is high when A-B is -50mV or more positive or when the receiver inputs are open or shorted, and low when A-B is -200mV.
2 RE input Receiver enable input: the receiver is active when RE is low, and RO is high-impedance when RE is high.
3 DE input Driver enable input: a high level enables the driver (transmit state), and when both DE and RE are low the chip is in receive state with the driver outputs in high-impedance.
4 DI input Driver data input: with DE high, a high DI drives A high and B low, and a low DI drives A low and B high.
5 GND power_in Ground reference; all voltages are referenced to this pin.
6 A bidirectional Driver differential output and receiver differential input (non-inverting bus line), which is high-impedance when the driver is disabled.
7 B bidirectional Driver differential output and receiver differential input (inverting bus line), which is high-impedance when the driver is disabled.
8 Vcc power_in Power supply, 5V ±5% (4.5V to 5.5V) as stated for the working voltage range.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (working range) Vcc 4.5 5.5 V 2
Differential output voltage change when DI changes ΔVOD 0.2 V 2
Common-mode output voltage change when DI changes ΔVOC 0.2 V 2
Input high voltage VIH 2 V DE, RE, DI 2
Input low voltage VIL 0.8 V DE, RE, DI 2
Input current (DE, RE, DI) IIN1 -2 2 uA DE, RE, DI 2
Receiver differential input threshold voltage VTH -200 -50 mV -7V≤VCM≤+12V 2
Receiver differential threshold hysteresis ΔVTH 25 mV 2
Receiver output high voltage VOH 4 V IO=-8mA 2
Receiver output low voltage VOL 0.4 V IO=8mA 2
Receiver output leakage current (tri-state) IOZR 1 uA 0.4V≤Vo≤2.4V 2
Receiver input resistance RIN 96 kΩ 2
No load operating current ICC 480 600 uA RE=DI=GND or Vcc, DE=Vcc 2
Receiver output short-circuit current IOSR 95 mA 0V≤VRO≤Vcc 2
ESD protection between A/B (human body model) -15 15 kV Between A/B, human body mode 2
Driver enable to output high time tDZH 150 nS CL=100pF, Figure 4,6, S2 closed 2
Driver enable to output low time tDZL 150 nS CL=100pF, Figure 4,6, S1 closed 2
Driver high to off time tDHZ 100 nS CL=15pF, Figure 4,6, S1 closed 2
Driver low to off time tDLZ 100 nS CL=15pF, Figure 4,6, S2 closed 2
Driver rise and fall time tDR, tDF 25 nS Figure 3,5 2
Receiver input to output delay (low to high) tRPLH 150 nS /VID/≥2.0V; rising and falling time≤15nS, Figure 7,9 2
Receiver input to output delay (high to low) tRPHL 150 nS /VID/≥2.0V; rising and falling time≤15nS, Figure 7,9 2
Receiver differential output skew tRSKEW -10 10 nS Figure 2,8 2
Receiver enable to output low time tRZL 50 nS CL=100pF, Figure 2,8 2
Receiver enable to output high time tRZH 50 nS CL=100pF, Figure 2,8 2
Receiver low to off time tRLZ 50 nS CL=100pF, Figure 2,8 2
Receiver high to off time tRHZ 50 nS CL=100pF, Figure 2,8 2
Storage temperature range TSTG -55 150 ℃ 2
Operating temperature range TOP -40 85 ℃ 2
Maximum operating temperature range TMOP -55 125 ℃ 2
Power dissipation PD 470 mW SOP-8 (+70℃ or above) 2
Solder temperature TL 300 ℃ 10 seconds 2
Supply voltage (absolute maximum) VCC -0.5 6 V 2
Control input voltage (DE, RE) DE,RE -0.3 6 V 2
Drive input voltage DI -0.3 6 V 2
Drive output voltage / receive input voltage (bus pins) A,B -7 12 V 2
Receiving output voltage RO -0.3 6 V 2

CAD (KiCad official)

  • Symbol: HX13085-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx13085-s-etched.step / hx13085-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx13085-s.step / hx13085-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (4 pp, sha256 0b58dd5b292de8e7, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF