component
HX1118D-3350RG
Public Made by Adomby adom
HANSCHIP semiconductor Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| hx1118d-3350rg-etched.glb | 7d ago |
| hx1118d-3350rg-etched.step | 7d ago |
| hx1118d-3350rg-hero.glb | 7d ago |
| hx1118d-3350rg-hero.overlay.json | 7d ago |
| hx1118d-3350rg.glb | 7d ago |
| hx1118d-3350rg.kicad_mod | 7d ago |
| hx1118d-3350rg.kicad_sym | 7d ago |
| hx1118d-3350rg.lbr | 7d ago |
| hx1118d-3350rg.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
HX1118D-3350RG
HANSCHIP semiconductor · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · ESOP-8
HX1118D-3350RG from HANSCHIP semiconductor, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/ADJ1 | power_in | Ground for regulator 1, which doubles as the ADJ pin for the adjustable output version; the datasheet gives no separate electrical limit for this pin. |
| 2 | VIN1 | power_in | Regulator 1 input voltage, with a recommended operating value of 12 V and an absolute maximum of 15 V. |
| 3 | GND/ADJ2 | power_in | Ground for regulator 2, which doubles as the ADJ pin for the adjustable output version; the datasheet gives no separate electrical limit for this pin. |
| 4 | VIN2 | power_in | Regulator 2 input voltage, with a recommended operating value of 12 V and an absolute maximum of 15 V. |
| 5 | VOUT2 | power_out | Regulator 2 output voltage; pins 5 and 6 are both listed as VOUT2 and are the same output. |
| 6 | VOUT2 | power_out | Regulator 2 output voltage; pins 5 and 6 are both listed as VOUT2 and are the same output. |
| 7 | VOUT1 | power_out | Regulator 1 output voltage; pins 7 and 8 are both listed as VOUT1 and are the same output. |
| 8 | VOUT1 | power_out | Regulator 1 output voltage; pins 7 and 8 are both listed as VOUT1 and are the same output. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输出电压 VOUT (HX1118-3.3 channel, 25°C row) | VOUT | 3.25 | 3.3 | 3.349 | V | IOUT=10mA,VIN=5V,TJ=25℃, 0≤IOUT≤1A,4.75V≤VIN≤10V | 6 |
| 输出电压 VOUT (HX1118-3.3 channel, full temperature row) | VOUT | 3.235 | 3.3 | 3.365 | V | 6 | |
| 输出电压 VOUT (HX1118-5.0 channel, 25°C row) | VOUT | 4.925 | 5 | 5.075 | V | IOUT=10mA,VIN=7V,TJ=25℃, 0≤ IOUT≤1A,6.5V≤VIN≤12V | 6 |
| 输出电压 VOUT (HX1118-5.0 channel, full temperature row) | VOUT | 4.9 | 5 | 5.1 | V | 6 | |
| 线性调整 Line regulation | Rline | 9 | 18 | mV | VINMIN ≤VIN≤ 12V,VOUT=Fixed/Adj, IOUT=10mA | 6 | |
| 负载调整 Load regulation | Rload | 10 | 18 | mV | 10mA≤IOUT≤ 1A,VOUT=Fixed/Adj | 6 | |
| 漏失电压 Dropout voltage (100mA) | Vdrop | 1 | 1.2 | V | IOUT=100mA | 6 | |
| 漏失电压 Dropout voltage (500mA) | Vdrop | 1.05 | 1.25 | V | IOUT=500mA | 6 | |
| 漏失电压 Dropout voltage (800mA) | Vdrop | 1.2 | 1.3 | V | IOUT=800mA | 6 | |
| 静态电流 Quiescent current | Iq | 5 | 10 | mA | 4.25V≤VIN≤ 6.5V | 6 | |
| 纹波抑制比 Ripple rejection | PSRR | 60 | 75 | dB | fRIPPLE=120Hz,(VIN-VOUT)=3V, VRIPPLE=1VPP | 6 | |
| 限流点 Current limit | Ilimit | 2.1 | 2.5 | A | 6 | ||
| 稳态输出电流 Steady-state output current (single channel) | IOC | 1 | A | 单路,VINMIN ≤VIN≤ 12V,TJ=25°C | 6 | ||
| 输入工作电压 Input voltage (absolute maximum) | VIN | 15 | V | 5 | |||
| 引脚温度 Lead temperature (soldering) | TLEAD | 260 | °C | 焊接 10 秒 | 5 | ||
| 工作结温范围 Operating junction temperature (absolute maximum) | TJ | 150 | °C | 5 | |||
| 储存温度 Storage temperature | TSTG | -65 | 150 | °C | 5 | ||
| ESD 能力 ESD capability | ESD | 2000 | V | 5 | |||
| 输入电压 Recommended input voltage | VIN | 12 | V | 5 | |||
| 工作结温范围 Recommended operating junction temperature | TJ | -40 | 125 | °C | 5 |
CAD (KiCad official)
- Symbol:
HX1118D-3350RG - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx1118d-3350rg-etched.step/hx1118d-3350rg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx1118d-3350rg.step/hx1118d-3350rg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (11 pp, sha256
731fcbf28cb13a5b, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).