main
Ray
Publish 0.1.0
9be85e0
HV9925SG-G
Microchip Tech · LED Drivers · ESOP-8
HV9925SG-G from Microchip Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RSENSE | input | Source terminal of the output switching MOSFET, connected to the current sense resistor whose voltage is compared against 0.47 V to set the peak current. |
| 2 | GND | power_in | Common connection for all circuits and the reference for the 7.5 V VDD regulator. |
| 3 | PWMD | input | PWM dimming input to the IC, with VIH of at least 2 V and VIL of at most 0.8 V, and a 200 kΩ typical pull-down. |
| 4 | VDD | power_in | Power supply pin for internal control circuits, rated at -0.3 V to +10 V and to be bypassed with a 0.1 µF low-impedance capacitor. |
| 5 | NC | unconnected | No connection. |
| 6 | DRAIN | output | Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range. |
| 7 | DRAIN | output | Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range. |
| 8 | DRAIN | output | Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | ESOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Undervoltage Upper Threshold | VUVLO,R | 4.8 | V | VDD Rising | 4 | ||
| Operating Supply Current | IDD | 300 | 500 | μA | VDD(EXT) = 8.5V | 4 | |
| VDRAIN Supply Voltage | VDRAIN | 20 | 400 | V | 4 | ||
| On-Resistance | RON | 100 | 200 | Ω | IDRAIN = 50 mA | 4 | |
| Output Capacitance | CDRAIN | 1 | 5 | pF | VDRAIN = 400V (Note 2) | 4 | |
| DRAIN Saturation Current | ISAT | 100 | 150 | mA | 4 | ||
| Threshold Voltage | VTH | 0.435 | 0.47 | 0.525 | V | 4 | |
| Leading Edge Blanking Delay | TBLANK | 200 | 300 | 400 | ns | Note 2 | 4 |
| Minimum On-Time | TON(MIN) | 650 | ns | 4 | |||
| Off-Time | TOFF | 8 | 10.5 | 13 | μs | 4 | |
| PWMD Input High Voltage | VPWMD,HI | 2 | V | 4 | |||
| PWMD Input Low Voltage | VPWMD,LO | 0.8 | V | 4 | |||
| PWMD Pull-Down Resistance | RPWMD | 100 | 200 | 300 | kΩ | VPWMD = 5V | 4 |
| Operating Ambient Temperature | TA | -40 | 85 | °C | 5 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 5 | ||
| Storage Temperature | TS | -65 | 150 | °C | 5 | ||
| Maximum Junction Temperature | TJ(ABSMAX) | 150 | °C | 5 | |||
| DRAIN-to-Source Breakdown Voltage | VDS(BR) | 475 | V | 4 | |||
| Supply Voltage | VDD | -0.3 | 10 | V | 4 | ||
| PWMD, RSENSE Voltage | -0.3 | 10 | V | 4 | |||
| Supply Current | IDD | 5 | mA | 4 | |||
| Junction Temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage Temperature | TS | -65 | 150 | °C | 4 | ||
| Power Dissipation at 25°C | 800 | mW | at 25°C (Note 1) | 4 | |||
| VDD Regulator Output | VDD | 7.5 | V | 4 | |||
| VDD Undervoltage Lockout Hysteresis | ΔVUVLO | 200 | mV | 4 | |||
| Overtemperature Trip Limit | TOT | 140 | °C | Note 2 | 4 | ||
| Temperature Hysteresis | TOTHYS | 60 | °C | Note 2 | 4 | ||
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | 84 | °C/W | Note 1: Mounted on JEDEC 2s2p test PCB | 5 | ||
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | 125 | °C/W | Note 2: Mounted on standard minimum pad | 5 | ||
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | 105 | °C/W | Note 3: Mounted on a 0.04 square inch pad of 1 oz copper | 5 | ||
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | 60 | °C/W | Note 4: Mounted on a 1 square inch pad of 1 oz copper | 5 |
CAD (KiCad official)
- Symbol:
HV9925SG-G - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
hv9925sg-g-etched.step/hv9925sg-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv9925sg-g.step/hv9925sg-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (20 pp, sha256
49a624470c497e75, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HV9925SG-G
**Microchip Tech** · LED Drivers · ESOP-8
HV9925SG-G from Microchip Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RSENSE | input | Source terminal of the output switching MOSFET, connected to the current sense resistor whose voltage is compared against 0.47 V to set the peak current. |
| 2 | GND | power_in | Common connection for all circuits and the reference for the 7.5 V VDD regulator. |
| 3 | PWMD | input | PWM dimming input to the IC, with VIH of at least 2 V and VIL of at most 0.8 V, and a 200 kΩ typical pull-down. |
| 4 | VDD | power_in | Power supply pin for internal control circuits, rated at -0.3 V to +10 V and to be bypassed with a 0.1 µF low-impedance capacitor. |
| 5 | NC | unconnected | No connection. |
| 6 | DRAIN | output | Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range. |
| 7 | DRAIN | output | Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range. |
| 8 | DRAIN | output | Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | ESOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Undervoltage Upper Threshold | VUVLO,R | 4.8 | | | V | VDD Rising | 4 |
| Operating Supply Current | IDD | | 300 | 500 | μA | VDD(EXT) = 8.5V | 4 |
| VDRAIN Supply Voltage | VDRAIN | 20 | | 400 | V | | 4 |
| On-Resistance | RON | | 100 | 200 | Ω | IDRAIN = 50 mA | 4 |
| Output Capacitance | CDRAIN | | 1 | 5 | pF | VDRAIN = 400V (Note 2) | 4 |
| DRAIN Saturation Current | ISAT | 100 | 150 | | mA | | 4 |
| Threshold Voltage | VTH | 0.435 | 0.47 | 0.525 | V | | 4 |
| Leading Edge Blanking Delay | TBLANK | 200 | 300 | 400 | ns | Note 2 | 4 |
| Minimum On-Time | TON(MIN) | | | 650 | ns | | 4 |
| Off-Time | TOFF | 8 | 10.5 | 13 | μs | | 4 |
| PWMD Input High Voltage | VPWMD,HI | 2 | | | V | | 4 |
| PWMD Input Low Voltage | VPWMD,LO | | | 0.8 | V | | 4 |
| PWMD Pull-Down Resistance | RPWMD | 100 | 200 | 300 | kΩ | VPWMD = 5V | 4 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 5 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 5 |
| Storage Temperature | TS | -65 | | 150 | °C | | 5 |
| Maximum Junction Temperature | TJ(ABSMAX) | | | 150 | °C | | 5 |
| DRAIN-to-Source Breakdown Voltage | VDS(BR) | | | 475 | V | | 4 |
| Supply Voltage | VDD | -0.3 | | 10 | V | | 4 |
| PWMD, RSENSE Voltage | | -0.3 | | 10 | V | | 4 |
| Supply Current | IDD | | | 5 | mA | | 4 |
| Junction Temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage Temperature | TS | -65 | | 150 | °C | | 4 |
| Power Dissipation at 25°C | | | | 800 | mW | at 25°C (Note 1) | 4 |
| VDD Regulator Output | VDD | | 7.5 | | V | | 4 |
| VDD Undervoltage Lockout Hysteresis | ΔVUVLO | | 200 | | mV | | 4 |
| Overtemperature Trip Limit | TOT | | 140 | | °C | Note 2 | 4 |
| Temperature Hysteresis | TOTHYS | | 60 | | °C | Note 2 | 4 |
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | | 84 | | °C/W | Note 1: Mounted on JEDEC 2s2p test PCB | 5 |
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | | 125 | | °C/W | Note 2: Mounted on standard minimum pad | 5 |
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | | 105 | | °C/W | Note 3: Mounted on a 0.04 square inch pad of 1 oz copper | 5 |
| Package Thermal Resistance, 8-lead SOIC with Heat Slug | θJA | | 60 | | °C/W | Note 4: Mounted on a 1 square inch pad of 1 oz copper | 5 |
## CAD (KiCad official)
- Symbol: `HV9925SG-G`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `hv9925sg-g-etched.step` / `hv9925sg-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv9925sg-g.step` / `hv9925sg-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/hv9925sg-g-datasheet.pdf) (20 pp, sha256 `49a624470c497e75`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hv9925sg-g-datasheet.pdf)