main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hv9925sg-g: viewers · Ray
hv9925sg-g-etched.glb Publish 0.1.0 · Ray
hv9925sg-g-etched.step hv9925sg-g: factory component page (tier=mfr) · Ray
hv9925sg-g-hero.glb hv9925sg-g: hero GLB from the etched model (keeps the MPN mark) · Ray
hv9925sg-g-hero.overlay.json Publish 0.1.0 · Ray
hv9925sg-g.glb Publish 0.1.0 · Ray
hv9925sg-g.kicad_mod Publish 0.1.0 · Ray
hv9925sg-g.kicad_sym Publish 0.1.0 · Ray
hv9925sg-g.lbr Publish 0.1.0 · Ray
hv9925sg-g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

HV9925SG-G

Microchip Tech · LED Drivers · ESOP-8

HV9925SG-G from Microchip Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RSENSE input Source terminal of the output switching MOSFET, connected to the current sense resistor whose voltage is compared against 0.47 V to set the peak current.
2 GND power_in Common connection for all circuits and the reference for the 7.5 V VDD regulator.
3 PWMD input PWM dimming input to the IC, with VIH of at least 2 V and VIL of at most 0.8 V, and a 200 kΩ typical pull-down.
4 VDD power_in Power supply pin for internal control circuits, rated at -0.3 V to +10 V and to be bypassed with a 0.1 µF low-impedance capacitor.
5 NC unconnected No connection.
6 DRAIN output Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range.
7 DRAIN output Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range.
8 DRAIN output Drain terminal of the internal 475 V output switching MOSFET and a linear regulator input, with a 20 V to 400 V supply range.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package ESOP-8
Category Nixie Tube Driver/LED Driver
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Undervoltage Upper Threshold VUVLO,R 4.8 V VDD Rising 4
Operating Supply Current IDD 300 500 μA VDD(EXT) = 8.5V 4
VDRAIN Supply Voltage VDRAIN 20 400 V 4
On-Resistance RON 100 200 Ω IDRAIN = 50 mA 4
Output Capacitance CDRAIN 1 5 pF VDRAIN = 400V (Note 2) 4
DRAIN Saturation Current ISAT 100 150 mA 4
Threshold Voltage VTH 0.435 0.47 0.525 V 4
Leading Edge Blanking Delay TBLANK 200 300 400 ns Note 2 4
Minimum On-Time TON(MIN) 650 ns 4
Off-Time TOFF 8 10.5 13 μs 4
PWMD Input High Voltage VPWMD,HI 2 V 4
PWMD Input Low Voltage VPWMD,LO 0.8 V 4
PWMD Pull-Down Resistance RPWMD 100 200 300 kΩ VPWMD = 5V 4
Operating Ambient Temperature TA -40 85 °C 5
Operating Junction Temperature TJ -40 125 °C 5
Storage Temperature TS -65 150 °C 5
Maximum Junction Temperature TJ(ABSMAX) 150 °C 5
DRAIN-to-Source Breakdown Voltage VDS(BR) 475 V 4
Supply Voltage VDD -0.3 10 V 4
PWMD, RSENSE Voltage -0.3 10 V 4
Supply Current IDD 5 mA 4
Junction Temperature TJ -40 150 °C 4
Storage Temperature TS -65 150 °C 4
Power Dissipation at 25°C 800 mW at 25°C (Note 1) 4
VDD Regulator Output VDD 7.5 V 4
VDD Undervoltage Lockout Hysteresis ΔVUVLO 200 mV 4
Overtemperature Trip Limit TOT 140 °C Note 2 4
Temperature Hysteresis TOTHYS 60 °C Note 2 4
Package Thermal Resistance, 8-lead SOIC with Heat Slug θJA 84 °C/W Note 1: Mounted on JEDEC 2s2p test PCB 5
Package Thermal Resistance, 8-lead SOIC with Heat Slug θJA 125 °C/W Note 2: Mounted on standard minimum pad 5
Package Thermal Resistance, 8-lead SOIC with Heat Slug θJA 105 °C/W Note 3: Mounted on a 0.04 square inch pad of 1 oz copper 5
Package Thermal Resistance, 8-lead SOIC with Heat Slug θJA 60 °C/W Note 4: Mounted on a 1 square inch pad of 1 oz copper 5

CAD (KiCad official)

  • Symbol: HV9925SG-G
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: hv9925sg-g-etched.step / hv9925sg-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv9925sg-g.step / hv9925sg-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (20 pp, sha256 49a624470c497e75, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF