main
Ray Publish 0.1.0 b744854

HV9911NG-G-M901

Microchip Tech · LED Drivers · SOIC-16

HV9911NG-G-M901 from Microchip Tech, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input of the 250V high-voltage linear regulator.
2 VDD power_in Power supply pin for all internal circuits that must be bypassed to GND with a low ESR capacitor of at least 0.1 µF.
3 GATE output Output gate driver for an external N-channel power MOSFET.
4 GND power_in Ground return for all circuits; this pin must be connected to the return path from the input.
5 CS input Senses the drain current of the external power FET and includes a built-in 100 ns (minimum) blanking time.
6 SC passive Slope compensation for current sense; a resistor between SC and GND programs the slope compensation, and the pin can be left open in constant Off-time mode.
7 RT passive Sets the switching frequency with a resistor to GND (constant frequency mode) or the off-time with a resistor to GATE (constant Off-time mode).
8 SYNC bidirectional I/O pin that can be connected to the sync pins of other HV9911 circuits so the oscillators lock to the highest-frequency oscillator.
9 CLIM input Provides a programmable input current limit for the converter, set by a resistor divider from the REF pin.
10 REF power_out Provides a 2% accurate reference voltage and must be bypassed with at least a 10 nF-0.22 µF capacitor to GND.
11 FAULT output Pulled to ground during an output short-circuit or output overvoltage condition; can drive an external MOSFET to disconnect the load in boost converters.
12 OVP input Overvoltage protection input; when the voltage exceeds 1.25V the gate output is turned off and FAULT goes low, and the IC turns on again when power is recycled.
13 PWMD input Disables switching when pulled to GND or left open; applying an external TTL high level resumes switching.
14 COMP passive Connection for a compensation network between COMP and GND to achieve stable closed-loop control.
15 IREF input Sets the output current level; the current reference is set using a resistor divider from the REF pin.
16 FDBK input Provides output current feedback to the controller through a current sense resistor.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-16
Category Nixie Tube Driver/LED Driver
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input DC Supply Voltage Range VINDC 250 V DC input voltage (Note 1) 5
Shutdown Mode Supply Current IINSD 1 1.5 mA PWMD connected to GND, VIN = 24V (Note 1) 5
Internally Regulated Voltage VDD 7.25 7.75 8.25 V VIN = 9V-250V, IDD(EXT) = 0, PWMD connected to GND (Note 1) 5
VDD Undervoltage Lockout Threshold UVLO 6.65 6.9 7.2 V VDD Rising 5
Steady State External Voltage that can be applied at the VDD Pin VDD(EXT) 12 V Note 3 5
REF Pin Voltage VREF 1.225 1.25 1.275 V REF bypassed with a 0.1 µF capacitor to GND, IREF = 0, VDD = 7.75V, PWMD = GND (Note 1) 5
Line Regulation of Reference Voltage VREFLINE 0 20 mV REF bypassed with a 0.1 µF capacitor to GND, IREF = 0, VDD = 7.25V-12V, PWMD = GND 5
Load Regulation of Reference Voltage VREFLOAD 0 10 mV REF bypassed with a 0.1 µF capacitor to GND, IREF = 0µ-500µ, PWMD = GND 6
PWMD Input Low Voltage VPWMD(LO) 0.8 V VDD = 7.25V-12V (Note 1) 6
PWMD Input High Voltage VPWMD(HI) 2 V VDD = 7.25V-12V (Note 1) 6
PWMD Pull-down Resistance RPWMD 50 100 150 kΩ VPWMD = 5V 6
Gate Short-circuit Current ISOURCE 0.2 A VGATE = 0V, VDD = 7.75V 6
Gate Sinking Current ISINK 0.4 A VGATE = 7.75V, VDD = 7.75V 6
Gate Output Rise Time TRISE 50 85 ns CGATE = 1 nF, VDD = 7.75V 6
Gate Output Fall Time TFALL 25 45 ns CGATE = 1 nF, VDD = 7.75V 6
IC Shutdown Voltage (OVP) VOVP 1.215 1.25 1.285 V VDD = 7.25V-12V, OVP rising (Note 1) 6
Leading Edge Blanking TBLANK 100 375 ns 6
Delay to Output of COMP Comparator TDELAY1 180 ns COMP = VDD, CLIM = REF, VCS = 0 mV to 600 mV (step up) 6
Delay to Output of CLIMIT Comparator TDELAY2 180 ns COMP = VDD, CLIM = 300 mV, VCS = 0 mV to 400 mV (step up) 6
Comparator Offset Voltage VOFFSET -10 10 mV 6
Open-loop DC Gain AV 66 dB Output open 6
Input Common Mode Range VCM -0.3 3 V Note 4 6
Output Voltage Range (transconductance opamp) VO 0.7 6.75 , VDD = 7.75V (Note 4) 6
Transconductance gm 340 435 530 µA/V 6
Input Offset Voltage (transconductance opamp) VOFFSET -2 4 mV 6
Input Bias Current IBIAS 0.5 1 nA Note 4 6
Oscillator Frequency (RT = 909 kΩ) fOSC1 88 100 112 kHz RT = 909 kΩ (Note 1) 6
Oscillator Frequency (RT = 261 kΩ) fOSC2 308 350 392 kHz RT = 261 kΩ (Note 1) 6
Sync Output Current IOUTSYNC 10 20 µA 6
Sync Input Current IINSYNC 0 200 µA VSYNC < 0.1V 6
Propagation Time for Short-circuit Detection TOFF 250 ns IREF = 200 mV, FDBK = 450 mV, FAULT goes from high to low 7
Fault Output Rise Time TRISE, FAULT 300 ns 1 nF capacitor at FAULT pin 7
Fault Output Fall Time TFALL, FAULT 200 ns 1 nF capacitor at FAULT pin 7
Amplifier Gain at IREF Pin GFAULT 1.8 2 2.2 , IREF = 200 mV 7
Current sourced out of SC Pin ISLOPE 0 100 µA 7
Internal Current Mirror Ratio GSLOPE 1.8 2 2.2 , ISLOPE = 50 µA, RCSENSE = 1 kΩ 7
Operating Ambient Temperature TA -40 85 °C 7
Maximum Junction Temperature TJ(MAX) 125 °C 7
Storage Temperature Ts -65 150 °C 7
VIN to GND -0.5 250 V 5
VDD to GND -0.3 13.5 V 5
CS to GND -0.3 V 5
PWMD to GND -0.3 V 5
Gate to GND -0.3 V 5
All Other Pins to GND -0.3 V 5
Continuous Power Dissipation 1000 mW TA = +25°C; derate 10 mW/°C above +25°C 5
Package Thermal Resistance, junction to ambient (16-lead SOIC) JA 83 °C/W 16-lead SOIC 7

CAD (KiCad official)

  • Symbol: HV9911NG-G-M901
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: hv9911ng-g-m901-etched.step / hv9911ng-g-m901-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv9911ng-g-m901.step / hv9911ng-g-m901.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 659df4c291d46da7, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF