Generated by kicad-footprint-generator · KiCad file format 20260206
HV9911NG-G-M901
Microchip Tech · LED Drivers · SOIC-16
HV9911NG-G-M901 from Microchip Tech, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input of the 250V high-voltage linear regulator. |
| 2 | VDD | power_in | Power supply pin for all internal circuits that must be bypassed to GND with a low ESR capacitor of at least 0.1 µF. |
| 3 | GATE | output | Output gate driver for an external N-channel power MOSFET. |
| 4 | GND | power_in | Ground return for all circuits; this pin must be connected to the return path from the input. |
| 5 | CS | input | Senses the drain current of the external power FET and includes a built-in 100 ns (minimum) blanking time. |
| 6 | SC | passive | Slope compensation for current sense; a resistor between SC and GND programs the slope compensation, and the pin can be left open in constant Off-time mode. |
| 7 | RT | passive | Sets the switching frequency with a resistor to GND (constant frequency mode) or the off-time with a resistor to GATE (constant Off-time mode). |
| 8 | SYNC | bidirectional | I/O pin that can be connected to the sync pins of other HV9911 circuits so the oscillators lock to the highest-frequency oscillator. |
| 9 | CLIM | input | Provides a programmable input current limit for the converter, set by a resistor divider from the REF pin. |
| 10 | REF | power_out | Provides a 2% accurate reference voltage and must be bypassed with at least a 10 nF-0.22 µF capacitor to GND. |
| 11 | FAULT | output | Pulled to ground during an output short-circuit or output overvoltage condition; can drive an external MOSFET to disconnect the load in boost converters. |
| 12 | OVP | input | Overvoltage protection input; when the voltage exceeds 1.25V the gate output is turned off and FAULT goes low, and the IC turns on again when power is recycled. |
| 13 | PWMD | input | Disables switching when pulled to GND or left open; applying an external TTL high level resumes switching. |
| 14 | COMP | passive | Connection for a compensation network between COMP and GND to achieve stable closed-loop control. |
| 15 | IREF | input | Sets the output current level; the current reference is set using a resistor divider from the REF pin. |
| 16 | FDBK | input | Provides output current feedback to the controller through a current sense resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-16 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input DC Supply Voltage Range | VINDC | 250 | V | DC input voltage (Note 1) | 5 | ||
| Shutdown Mode Supply Current | IINSD | 1 | 1.5 | mA | PWMD connected to GND, VIN = 24V (Note 1) | 5 | |
| Internally Regulated Voltage | VDD | 7.25 | 7.75 | 8.25 | V | VIN = 9V-250V, IDD(EXT) = 0, PWMD connected to GND (Note 1) | 5 |
| VDD Undervoltage Lockout Threshold | UVLO | 6.65 | 6.9 | 7.2 | V | VDD Rising | 5 |
| Steady State External Voltage that can be applied at the VDD Pin | VDD(EXT) | 12 | V | Note 3 | 5 | ||
| REF Pin Voltage | VREF | 1.225 | 1.25 | 1.275 | V | REF bypassed with a 0.1 µF capacitor to GND, IREF = 0, VDD = 7.75V, PWMD = GND (Note 1) | 5 |
| Line Regulation of Reference Voltage | VREFLINE | 0 | 20 | mV | REF bypassed with a 0.1 µF capacitor to GND, IREF = 0, VDD = 7.25V-12V, PWMD = GND | 5 | |
| Load Regulation of Reference Voltage | VREFLOAD | 0 | 10 | mV | REF bypassed with a 0.1 µF capacitor to GND, IREF = 0µ-500µ, PWMD = GND | 6 | |
| PWMD Input Low Voltage | VPWMD(LO) | 0.8 | V | VDD = 7.25V-12V (Note 1) | 6 | ||
| PWMD Input High Voltage | VPWMD(HI) | 2 | V | VDD = 7.25V-12V (Note 1) | 6 | ||
| PWMD Pull-down Resistance | RPWMD | 50 | 100 | 150 | kΩ | VPWMD = 5V | 6 |
| Gate Short-circuit Current | ISOURCE | 0.2 | A | VGATE = 0V, VDD = 7.75V | 6 | ||
| Gate Sinking Current | ISINK | 0.4 | A | VGATE = 7.75V, VDD = 7.75V | 6 | ||
| Gate Output Rise Time | TRISE | 50 | 85 | ns | CGATE = 1 nF, VDD = 7.75V | 6 | |
| Gate Output Fall Time | TFALL | 25 | 45 | ns | CGATE = 1 nF, VDD = 7.75V | 6 | |
| IC Shutdown Voltage (OVP) | VOVP | 1.215 | 1.25 | 1.285 | V | VDD = 7.25V-12V, OVP rising (Note 1) | 6 |
| Leading Edge Blanking | TBLANK | 100 | 375 | ns | 6 | ||
| Delay to Output of COMP Comparator | TDELAY1 | 180 | ns | COMP = VDD, CLIM = REF, VCS = 0 mV to 600 mV (step up) | 6 | ||
| Delay to Output of CLIMIT Comparator | TDELAY2 | 180 | ns | COMP = VDD, CLIM = 300 mV, VCS = 0 mV to 400 mV (step up) | 6 | ||
| Comparator Offset Voltage | VOFFSET | -10 | 10 | mV | 6 | ||
| Open-loop DC Gain | AV | 66 | dB | Output open | 6 | ||
| Input Common Mode Range | VCM | -0.3 | 3 | V | Note 4 | 6 | |
| Output Voltage Range (transconductance opamp) | VO | 0.7 | 6.75 | , | VDD = 7.75V (Note 4) | 6 | |
| Transconductance | gm | 340 | 435 | 530 | µA/V | 6 | |
| Input Offset Voltage (transconductance opamp) | VOFFSET | -2 | 4 | mV | 6 | ||
| Input Bias Current | IBIAS | 0.5 | 1 | nA | Note 4 | 6 | |
| Oscillator Frequency (RT = 909 kΩ) | fOSC1 | 88 | 100 | 112 | kHz | RT = 909 kΩ (Note 1) | 6 |
| Oscillator Frequency (RT = 261 kΩ) | fOSC2 | 308 | 350 | 392 | kHz | RT = 261 kΩ (Note 1) | 6 |
| Sync Output Current | IOUTSYNC | 10 | 20 | µA | 6 | ||
| Sync Input Current | IINSYNC | 0 | 200 | µA | VSYNC < 0.1V | 6 | |
| Propagation Time for Short-circuit Detection | TOFF | 250 | ns | IREF = 200 mV, FDBK = 450 mV, FAULT goes from high to low | 7 | ||
| Fault Output Rise Time | TRISE, FAULT | 300 | ns | 1 nF capacitor at FAULT pin | 7 | ||
| Fault Output Fall Time | TFALL, FAULT | 200 | ns | 1 nF capacitor at FAULT pin | 7 | ||
| Amplifier Gain at IREF Pin | GFAULT | 1.8 | 2 | 2.2 | , | IREF = 200 mV | 7 |
| Current sourced out of SC Pin | ISLOPE | 0 | 100 | µA | 7 | ||
| Internal Current Mirror Ratio | GSLOPE | 1.8 | 2 | 2.2 | , | ISLOPE = 50 µA, RCSENSE = 1 kΩ | 7 |
| Operating Ambient Temperature | TA | -40 | 85 | °C | 7 | ||
| Maximum Junction Temperature | TJ(MAX) | 125 | °C | 7 | |||
| Storage Temperature | Ts | -65 | 150 | °C | 7 | ||
| VIN to GND | -0.5 | 250 | V | 5 | |||
| VDD to GND | -0.3 | 13.5 | V | 5 | |||
| CS to GND | -0.3 | V | 5 | ||||
| PWMD to GND | -0.3 | V | 5 | ||||
| Gate to GND | -0.3 | V | 5 | ||||
| All Other Pins to GND | -0.3 | V | 5 | ||||
| Continuous Power Dissipation | 1000 | mW | TA = +25°C; derate 10 mW/°C above +25°C | 5 | |||
| Package Thermal Resistance, junction to ambient (16-lead SOIC) | JA | 83 | °C/W | 16-lead SOIC | 7 |
CAD (KiCad official)
- Symbol:
HV9911NG-G-M901 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
hv9911ng-g-m901-etched.step/hv9911ng-g-m901-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv9911ng-g-m901.step/hv9911ng-g-m901.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
659df4c291d46da7, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).