main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hv9861ang-g: viewers · Ray
hv9861ang-g-etched.glb Publish 0.1.0 · Ray
hv9861ang-g-etched.step hv9861ang-g: factory component page (tier=mfr) · Ray
hv9861ang-g-hero.glb hv9861ang-g: hero GLB from the etched model (keeps the MPN mark) · Ray
hv9861ang-g-hero.overlay.json Publish 0.1.0 · Ray
hv9861ang-g.glb Publish 0.1.0 · Ray
hv9861ang-g.kicad_mod Publish 0.1.0 · Ray
hv9861ang-g.kicad_sym Publish 0.1.0 · Ray
hv9861ang-g.lbr Publish 0.1.0 · Ray
hv9861ang-g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

HV9861ANG-G

Microchip Tech · LED Drivers · SOIC-16

HV9861ANG-G from Microchip Tech, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input of the 15 to 450 V linear regulator; continuous voltage at VIN is limited by package power dissipation.
2 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.
3 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.
4 CS input Current sense pin that senses the FET current through an external sense resistor; the hiccup threshold VCSH is 410 to 510 mV and the absolute maximum rating is -0.3 V to 5.0 V.
5 GND power_in Ground return for all internal circuitry; must be electrically connected to the power-train ground.
6 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.
7 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.
8 GATE output Gate driver output for an external N-channel MOSFET; the external gate charge should be below 25 nC for switching frequencies up to 100 kHz and below 15 nC above 100 kHz.
9 PWMD input PWM dimming input; pulling it to GND turns the gate driver off and pulling it high lets it operate normally, with VIH of at least 2.2 V and VIL of at most 0.8 V.
10 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.
11 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.
12 VDD power_in Power supply pin for all internal circuits, regulated to 7.25 to 8.20 V and bypassed with a low-ESR capacitor of at least 0.1 µF to GND; the device can also be powered through VDD with a voltage above 7.5 V but below 12 V.
13 LD input Linear-dimming input that sets the current sense threshold while below 1.5 V; the GATE output is disabled when LD falls below 150 mV and recovers at 200 mV.
14 RT passive A timing resistor connected between this pin and GND programs the GATE off-time, with 30 kΩ ≤ RT ≤ 1.0 MΩ, and it must be wired to GND rather than GATE.
15 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.
16 NC unconnected No connection (NC) pin for the 16-lead SOIC per Table 2-1.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-16
Category Nixie Tube Driver/LED Driver
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input DC Supply Voltage Range VINDC 15 450 V DC Input Voltage (Note 3) 3
Shut-down Mode Supply Current IINSD 0.5 1.1 mA Pin PWMD to GND (Note 3) 3
Internally Regulated Voltage VDD 7.25 7.5 8.2 V 500 pF at GATE; RT = 226 kΩ 3
Line Regulation of VDD ΔVDD, line 1 V VIN = 15 - 450V, 500 pF at GATE; RT = 226 kΩ 3
Load Regulation of VDD ΔVDD, load 100 mV IDD(ext) = 0 - 1 mA, 500 pF at GATE; RT = 226 kΩ 3
VDD Under-voltage Lockout Threshold UVLO 6.45 V VIN rising (Note 3) 3
VDD Under-voltage Lockout Hysteresis ΔUVLO 500 mV VIN falling 3
VDD Voltage Margin ΔVDD(UV) 500 mV ΔVDD(UV) = VDD - UVLO (Note 3) 3
Maximum Input Current (limited by UVLO) IIN,MAX 3.5 mA VIN = 15V, TA = 25°C (Note 4) 3
Maximum Input Current (limited by UVLO) IIN,MAX 1.5 mA VIN = 15V, TA = 125°C (Note 4) 3
PWMD Input Low Voltage VEN(lo) 0.8 V VIN = 15 - 450V (Note 3) 3
PWMD Input High Voltage VEN(hi) 2.2 V VIN = 15 - 450V (Note 3) 3
Internal Pull-down Current at PWMD IEN 8 15 μA VPWMD = 0.8V 3
Current Sense Reference Voltage VCST 262 280 mV 4
LD-to-CS Voltage Ratio AV(LD) 0.175 0.182 , 4
LD-to-CS Voltage Offset AV • VLD(OFFSET) -15 12 mV VOFFSET = VCS - (AV(LD) • VLD); VLD = 1.2V 4
CS Threshold Temperature Regulation ΔVCS(TEMP) 5 mV Note 4 4
LD Input Voltage, Shutdown VLD(OFF) 150 mV VLD falling 4
LD Input Voltage, Enable VLD(EN) 200 mV VLD rising 4
Current Sense Blanking Interval TBLANK 140 290 ns Note 3 4
Minimum On-time TON(MIN) 760 ns VCS = VCST + 30 mV 4
Maximum Steady-state Duty Cycle DMAX 80 % Reduction in output LED current may occur beyond this duty cycle (Note 1) 4
Hiccup Threshold Voltage VCSH 410 510 mV Note 3 4
Current Limit Delay CS-to-GATE TDELAY 150 ns VCS = VCSH + 30 mV 4
Short Circuit Hiccup Time THICCUP 400 850 μs 4
Minimum On-time (Short Circuit) TON(MIN)SC 430 ns VCS = 4V 4
Off-time TOFF 32 40 48 μs RT = 1 MΩ 4
Off-time TOFF 8 10 12 μs RT = 226 kΩ 4
Sourcing Current ISOURCE 0.165 A VGATE = 0V, VDD = 7.5V 4
Sinking Current ISINK 0.165 A VGATE = VDD, VDD = 7.5V 4
Output Rise Time tRISE 30 50 ns CGATE = 500 pF, VDD = 7.5V 4
Output Fall Time tFALL 30 50 ns CGATE = 500 pF, VDD = 7.5V 4
Shut-down Temperature TSD 128 140 °C Note 4 4
Over-Temperature Hysteresis ΔTSD 20 °C Note 4 4
VIN to GND (absolute maximum) VIN -0.5 470 V 3
VDD to GND (absolute maximum) VDD 12 V 3
CS, RT to GND (absolute maximum) CS, RT -0.3 5 V to GND 3
Operating temperature (ambient) TA -40 125 °C 3
Storage temperature TSTG -65 150 °C 3
Thermal resistance, junction-to-ambient, 16-lead SOIC JA 83 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 10

CAD (KiCad official)

  • Symbol: HV9861ANG-G
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: hv9861ang-g-etched.step / hv9861ang-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv9861ang-g.step / hv9861ang-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 fb73b244792e85c2, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF