3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHV9861ANG-G
Microchip Tech · LED Drivers · SOIC-16
HV9861ANG-G from Microchip Tech, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input of the 15 to 450 V linear regulator; continuous voltage at VIN is limited by package power dissipation. |
| 2 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
| 3 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
| 4 | CS | input | Current sense pin that senses the FET current through an external sense resistor; the hiccup threshold VCSH is 410 to 510 mV and the absolute maximum rating is -0.3 V to 5.0 V. |
| 5 | GND | power_in | Ground return for all internal circuitry; must be electrically connected to the power-train ground. |
| 6 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
| 7 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
| 8 | GATE | output | Gate driver output for an external N-channel MOSFET; the external gate charge should be below 25 nC for switching frequencies up to 100 kHz and below 15 nC above 100 kHz. |
| 9 | PWMD | input | PWM dimming input; pulling it to GND turns the gate driver off and pulling it high lets it operate normally, with VIH of at least 2.2 V and VIL of at most 0.8 V. |
| 10 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
| 11 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
| 12 | VDD | power_in | Power supply pin for all internal circuits, regulated to 7.25 to 8.20 V and bypassed with a low-ESR capacitor of at least 0.1 µF to GND; the device can also be powered through VDD with a voltage above 7.5 V but below 12 V. |
| 13 | LD | input | Linear-dimming input that sets the current sense threshold while below 1.5 V; the GATE output is disabled when LD falls below 150 mV and recovers at 200 mV. |
| 14 | RT | passive | A timing resistor connected between this pin and GND programs the GATE off-time, with 30 kΩ ≤ RT ≤ 1.0 MΩ, and it must be wired to GND rather than GATE. |
| 15 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
| 16 | NC | unconnected | No connection (NC) pin for the 16-lead SOIC per Table 2-1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-16 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input DC Supply Voltage Range | VINDC | 15 | 450 | V | DC Input Voltage (Note 3) | 3 | |
| Shut-down Mode Supply Current | IINSD | 0.5 | 1.1 | mA | Pin PWMD to GND (Note 3) | 3 | |
| Internally Regulated Voltage | VDD | 7.25 | 7.5 | 8.2 | V | 500 pF at GATE; RT = 226 kΩ | 3 |
| Line Regulation of VDD | ΔVDD, line | 1 | V | VIN = 15 - 450V, 500 pF at GATE; RT = 226 kΩ | 3 | ||
| Load Regulation of VDD | ΔVDD, load | 100 | mV | IDD(ext) = 0 - 1 mA, 500 pF at GATE; RT = 226 kΩ | 3 | ||
| VDD Under-voltage Lockout Threshold | UVLO | 6.45 | V | VIN rising (Note 3) | 3 | ||
| VDD Under-voltage Lockout Hysteresis | ΔUVLO | 500 | mV | VIN falling | 3 | ||
| VDD Voltage Margin | ΔVDD(UV) | 500 | mV | ΔVDD(UV) = VDD - UVLO (Note 3) | 3 | ||
| Maximum Input Current (limited by UVLO) | IIN,MAX | 3.5 | mA | VIN = 15V, TA = 25°C (Note 4) | 3 | ||
| Maximum Input Current (limited by UVLO) | IIN,MAX | 1.5 | mA | VIN = 15V, TA = 125°C (Note 4) | 3 | ||
| PWMD Input Low Voltage | VEN(lo) | 0.8 | V | VIN = 15 - 450V (Note 3) | 3 | ||
| PWMD Input High Voltage | VEN(hi) | 2.2 | V | VIN = 15 - 450V (Note 3) | 3 | ||
| Internal Pull-down Current at PWMD | IEN | 8 | 15 | μA | VPWMD = 0.8V | 3 | |
| Current Sense Reference Voltage | VCST | 262 | 280 | mV | 4 | ||
| LD-to-CS Voltage Ratio | AV(LD) | 0.175 | 0.182 | , | 4 | ||
| LD-to-CS Voltage Offset | AV • VLD(OFFSET) | -15 | 12 | mV | VOFFSET = VCS - (AV(LD) • VLD); VLD = 1.2V | 4 | |
| CS Threshold Temperature Regulation | ΔVCS(TEMP) | 5 | mV | Note 4 | 4 | ||
| LD Input Voltage, Shutdown | VLD(OFF) | 150 | mV | VLD falling | 4 | ||
| LD Input Voltage, Enable | VLD(EN) | 200 | mV | VLD rising | 4 | ||
| Current Sense Blanking Interval | TBLANK | 140 | 290 | ns | Note 3 | 4 | |
| Minimum On-time | TON(MIN) | 760 | ns | VCS = VCST + 30 mV | 4 | ||
| Maximum Steady-state Duty Cycle | DMAX | 80 | % | Reduction in output LED current may occur beyond this duty cycle (Note 1) | 4 | ||
| Hiccup Threshold Voltage | VCSH | 410 | 510 | mV | Note 3 | 4 | |
| Current Limit Delay CS-to-GATE | TDELAY | 150 | ns | VCS = VCSH + 30 mV | 4 | ||
| Short Circuit Hiccup Time | THICCUP | 400 | 850 | μs | 4 | ||
| Minimum On-time (Short Circuit) | TON(MIN)SC | 430 | ns | VCS = 4V | 4 | ||
| Off-time | TOFF | 32 | 40 | 48 | μs | RT = 1 MΩ | 4 |
| Off-time | TOFF | 8 | 10 | 12 | μs | RT = 226 kΩ | 4 |
| Sourcing Current | ISOURCE | 0.165 | A | VGATE = 0V, VDD = 7.5V | 4 | ||
| Sinking Current | ISINK | 0.165 | A | VGATE = VDD, VDD = 7.5V | 4 | ||
| Output Rise Time | tRISE | 30 | 50 | ns | CGATE = 500 pF, VDD = 7.5V | 4 | |
| Output Fall Time | tFALL | 30 | 50 | ns | CGATE = 500 pF, VDD = 7.5V | 4 | |
| Shut-down Temperature | TSD | 128 | 140 | °C | Note 4 | 4 | |
| Over-Temperature Hysteresis | ΔTSD | 20 | °C | Note 4 | 4 | ||
| VIN to GND (absolute maximum) | VIN | -0.5 | 470 | V | 3 | ||
| VDD to GND (absolute maximum) | VDD | 12 | V | 3 | |||
| CS, RT to GND (absolute maximum) | CS, RT | -0.3 | 5 | V | to GND | 3 | |
| Operating temperature (ambient) | TA | -40 | 125 | °C | 3 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 3 | ||
| Thermal resistance, junction-to-ambient, 16-lead SOIC | JA | 83 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 10 |
CAD (KiCad official)
- Symbol:
HV9861ANG-G - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
hv9861ang-g-etched.step/hv9861ang-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv9861ang-g.step/hv9861ang-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
fb73b244792e85c2, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).