main
Ray
Publish 0.1.0
36d99ee
HV509K6-G
Microchip Tech · Other Lighting Drivers · QFN-32-EP(5x5)
HV509K6-G from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVOUT12 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 2 | HVOUT11 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 3 | HVOUT10 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 4 | HVOUT9 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 5 | HVOUT8 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 6 | HVOUT7 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 7 | HVOUT6 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 8 | HVOUT5 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 9 | HVOUT4 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 10 | HVOUT3 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 11 | HVOUT2 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 12 | HVOUT1 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 13 | NC | unconnected | No connect pin; not used by the device. |
| 14 | VPP | power_in | High voltage supply, 50V to 200V operating (absolute maximum 215V); the exposed heat slug is at this potential. |
| 15 | GND | power_in | Logic ground; all voltages are referenced to device ground. |
| 16 | NC | unconnected | No connect pin; not used by the device. |
| 17 | DIN | input | Serial data input to the 16-bit shift register, sampled on the low-to-high CLK transition; logic input levels are referenced to VDD (VIH 0.9VDD to VDD, VIL 0 to 0.1VDD). |
| 18 | NC | unconnected | No connect pin; not used by the device. |
| 19 | CLK | input | Clock input for the shift register; data shifts on the low-to-high transition, with clock frequency up to 500kHz. |
| 20 | VDD | power_in | Logic supply voltage, 2.0V to 5.5V (absolute maximum -0.5V to 7.0V). |
| 21 | POL | input | Polarity bar input logic that controls the output states together with the latch data. |
| 22 | LE | input | Latch enable bar input logic; data transfers to the 16-bit latch when LE is low and is stored when LE is high. |
| 23 | NC | unconnected | No connect pin; not used by the device. |
| 24 | DOUT | output | Serial data output buffer for cascading multiple devices, connected to DIN of the next HV509. |
| 25 | NC | unconnected | No connect pin; not used by the device. |
| 26 | VBIAS | power_in | Level translator bias and gate drive supply for the output N-channel MOSFETs, 2.6V to 6.6V; higher VBIAS increases the output sink current. |
| 27 | HVGND | power_in | High voltage ground reference for the high voltage outputs and backplane driver. |
| 28 | BP | output | High voltage backplane driver output, sourcing and sinking ±1.0mA. |
| 29 | HVOUT16 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 30 | HVOUT15 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 31 | HVOUT14 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 32 | HVOUT13 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-32-EP(5x5) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VDD | 2 | 3 | 5.5 | V | 2 | |
| Level translator supply voltage | VBIAS | 2.6 | 6.6 | V | 2 | ||
| Positive high voltage supply | VPP | 50 | 200 | V | 2 | ||
| Operating temperature | TA | 0 | 70 | °C | 2 | ||
| Low-level input voltage | VIL | 0 | V | 2 | |||
| Logic supply, VDD | VDD | -0.5 | 7 | V | 2 | ||
| Translator supply voltage | VBIAS | -0.5 | 7 | V | 2 | ||
| High voltage supply | VPP | 215 | V | 2 | |||
| Logic input levels | -0.5 | V | 2 | ||||
| Operating junction temperature | -40 | 125 | °C | 2 | |||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| VDD supply current | IDD | 1 | mA | fCLK = 500kHz | 3 | ||
| Quiescent VDD supply current | IDDQ | 10 | µA | All logic inputs = VDD or 0V | 3 | ||
| VBIAS supply current | IBIAS | 100 | µA | All HVOUTS switching at 1kHz. Peak IBIAS = 200mA with all channels switching | 3 | ||
| Quiescent VBIAS current | IBIASQ | 10 | µA | No HVOUT switching | 3 | ||
| Quiescent VPP supply current | IPPQ | 100 | µA | VPP = 200V, outputs are static | 3 | ||
| High-level logic input current | IIH | 10 | µA | VIH = VDD | 3 | ||
| Low-level logic input current | IIL | -10 | µA | VIL = 0V | 3 | ||
| Low level output HVOUT & BP | VOL | 12 | V | IHVOUT = 1.0mA, VBIAS = 5.4V, VPP = +50 to +200V | 3 | ||
| Low level output DOUT | VOL | 1 | V | IDOUT = 1.0mA | 3 | ||
| Logic input capacitance | CDIN | 10 | pF | 3 | |||
| Logic output capacitance | CDOUT | 10 | pF | 3 | |||
| Clock frequency | fCLK | 0 | 500 | kHz | 3 | ||
| Clock high / low pulse width | tC | 1 | µs | 3 | |||
| Data setup time before clock rises | tSU | 50 | ns | 3 | |||
| Data hold time after clock rises | tH | 50 | ns | 3 | |||
| LE from CLK setup time | tCLE | 15 | ns | 3 | |||
| LE pulse width | tWLE | 100 | ns | 3 | |||
| Clock negative edge to DOUT delay | tDD | 150 | ns | CLDOUT = 50pF, (CLDOUT includes CDIN and CDOUT) | 3 | ||
| Delay time from inputs for HVOUT / BP to start rise/fall | tPHV | 500 | ns | VPP = 200V, VBIAS = 5.4V | 3 | ||
| HVOUTPUT / BP rise time | tOR | 300 | µs | CL = 1500pF, VPP = 200V | 3 | ||
| HVOUTPUT / BP fall time | tOF | 300 | µs | CL = 1500pF, VBIAS = 5.4V, VPP = 200V | 3 |
CAD (KiCad official)
- Symbol:
HV509K6-G - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
hv509k6-g-etched.step/hv509k6-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv509k6-g.step/hv509k6-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (8 pp, sha256
6d244ab486bbc0a6, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HV509K6-G
**Microchip Tech** · Other Lighting Drivers · QFN-32-EP(5x5)
HV509K6-G from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVOUT12 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 2 | HVOUT11 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 3 | HVOUT10 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 4 | HVOUT9 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 5 | HVOUT8 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 6 | HVOUT7 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 7 | HVOUT6 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 8 | HVOUT5 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 9 | HVOUT4 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 10 | HVOUT3 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 11 | HVOUT2 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 12 | HVOUT1 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 13 | NC | unconnected | No connect pin; not used by the device. |
| 14 | VPP | power_in | High voltage supply, 50V to 200V operating (absolute maximum 215V); the exposed heat slug is at this potential. |
| 15 | GND | power_in | Logic ground; all voltages are referenced to device ground. |
| 16 | NC | unconnected | No connect pin; not used by the device. |
| 17 | DIN | input | Serial data input to the 16-bit shift register, sampled on the low-to-high CLK transition; logic input levels are referenced to VDD (VIH 0.9VDD to VDD, VIL 0 to 0.1VDD). |
| 18 | NC | unconnected | No connect pin; not used by the device. |
| 19 | CLK | input | Clock input for the shift register; data shifts on the low-to-high transition, with clock frequency up to 500kHz. |
| 20 | VDD | power_in | Logic supply voltage, 2.0V to 5.5V (absolute maximum -0.5V to 7.0V). |
| 21 | POL | input | Polarity bar input logic that controls the output states together with the latch data. |
| 22 | LE | input | Latch enable bar input logic; data transfers to the 16-bit latch when LE is low and is stored when LE is high. |
| 23 | NC | unconnected | No connect pin; not used by the device. |
| 24 | DOUT | output | Serial data output buffer for cascading multiple devices, connected to DIN of the next HV509. |
| 25 | NC | unconnected | No connect pin; not used by the device. |
| 26 | VBIAS | power_in | Level translator bias and gate drive supply for the output N-channel MOSFETs, 2.6V to 6.6V; higher VBIAS increases the output sink current. |
| 27 | HVGND | power_in | High voltage ground reference for the high voltage outputs and backplane driver. |
| 28 | BP | output | High voltage backplane driver output, sourcing and sinking ±1.0mA. |
| 29 | HVOUT16 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 30 | HVOUT15 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 31 | HVOUT14 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 32 | HVOUT13 | output | High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-32-EP(5x5) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VDD | 2 | 3 | 5.5 | V | | 2 |
| Level translator supply voltage | VBIAS | 2.6 | | 6.6 | V | | 2 |
| Positive high voltage supply | VPP | 50 | | 200 | V | | 2 |
| Operating temperature | TA | 0 | | 70 | °C | | 2 |
| Low-level input voltage | VIL | 0 | | | V | | 2 |
| Logic supply, VDD | VDD | -0.5 | | 7 | V | | 2 |
| Translator supply voltage | VBIAS | -0.5 | | 7 | V | | 2 |
| High voltage supply | VPP | | | 215 | V | | 2 |
| Logic input levels | | -0.5 | | | V | | 2 |
| Operating junction temperature | | -40 | | 125 | °C | | 2 |
| Storage temperature range | | -65 | | 150 | °C | | 2 |
| VDD supply current | IDD | | | 1 | mA | fCLK = 500kHz | 3 |
| Quiescent VDD supply current | IDDQ | | | 10 | µA | All logic inputs = VDD or 0V | 3 |
| VBIAS supply current | IBIAS | | | 100 | µA | All HVOUTS switching at 1kHz. Peak IBIAS = 200mA with all channels switching | 3 |
| Quiescent VBIAS current | IBIASQ | | | 10 | µA | No HVOUT switching | 3 |
| Quiescent VPP supply current | IPPQ | | | 100 | µA | VPP = 200V, outputs are static | 3 |
| High-level logic input current | IIH | | | 10 | µA | VIH = VDD | 3 |
| Low-level logic input current | IIL | | | -10 | µA | VIL = 0V | 3 |
| Low level output HVOUT & BP | VOL | | | 12 | V | IHVOUT = 1.0mA, VBIAS = 5.4V, VPP = +50 to +200V | 3 |
| Low level output DOUT | VOL | | | 1 | V | IDOUT = 1.0mA | 3 |
| Logic input capacitance | CDIN | | | 10 | pF | | 3 |
| Logic output capacitance | CDOUT | | | 10 | pF | | 3 |
| Clock frequency | fCLK | 0 | | 500 | kHz | | 3 |
| Clock high / low pulse width | tC | 1 | | | µs | | 3 |
| Data setup time before clock rises | tSU | 50 | | | ns | | 3 |
| Data hold time after clock rises | tH | 50 | | | ns | | 3 |
| LE from CLK setup time | tCLE | 15 | | | ns | | 3 |
| LE pulse width | tWLE | 100 | | | ns | | 3 |
| Clock negative edge to DOUT delay | tDD | | | 150 | ns | CLDOUT = 50pF, (CLDOUT includes CDIN and CDOUT) | 3 |
| Delay time from inputs for HVOUT / BP to start rise/fall | tPHV | | | 500 | ns | VPP = 200V, VBIAS = 5.4V | 3 |
| HVOUTPUT / BP rise time | tOR | | | 300 | µs | CL = 1500pF, VPP = 200V | 3 |
| HVOUTPUT / BP fall time | tOF | | | 300 | µs | CL = 1500pF, VBIAS = 5.4V, VPP = 200V | 3 |
## CAD (KiCad official)
- Symbol: `HV509K6-G`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `hv509k6-g-etched.step` / `hv509k6-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv509k6-g.step` / `hv509k6-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/hv509k6-g-datasheet.pdf) (8 pp, sha256 `6d244ab486bbc0a6`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hv509k6-g-datasheet.pdf)