Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HV509K6-G

Microchip Tech · Other Lighting Drivers · QFN-32-EP(5x5)

HV509K6-G from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HVOUT12 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
2 HVOUT11 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
3 HVOUT10 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
4 HVOUT9 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
5 HVOUT8 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
6 HVOUT7 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
7 HVOUT6 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
8 HVOUT5 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
9 HVOUT4 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
10 HVOUT3 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
11 HVOUT2 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
12 HVOUT1 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
13 NC unconnected No connect pin; not used by the device.
14 VPP power_in High voltage supply, 50V to 200V operating (absolute maximum 215V); the exposed heat slug is at this potential.
15 GND power_in Logic ground; all voltages are referenced to device ground.
16 NC unconnected No connect pin; not used by the device.
17 DIN input Serial data input to the 16-bit shift register, sampled on the low-to-high CLK transition; logic input levels are referenced to VDD (VIH 0.9VDD to VDD, VIL 0 to 0.1VDD).
18 NC unconnected No connect pin; not used by the device.
19 CLK input Clock input for the shift register; data shifts on the low-to-high transition, with clock frequency up to 500kHz.
20 VDD power_in Logic supply voltage, 2.0V to 5.5V (absolute maximum -0.5V to 7.0V).
21 POL input Polarity bar input logic that controls the output states together with the latch data.
22 LE input Latch enable bar input logic; data transfers to the 16-bit latch when LE is low and is stored when LE is high.
23 NC unconnected No connect pin; not used by the device.
24 DOUT output Serial data output buffer for cascading multiple devices, connected to DIN of the next HV509.
25 NC unconnected No connect pin; not used by the device.
26 VBIAS power_in Level translator bias and gate drive supply for the output N-channel MOSFETs, 2.6V to 6.6V; higher VBIAS increases the output sink current.
27 HVGND power_in High voltage ground reference for the high voltage outputs and backplane driver.
28 BP output High voltage backplane driver output, sourcing and sinking ±1.0mA.
29 HVOUT16 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
30 HVOUT15 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
31 HVOUT14 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
32 HVOUT13 output High voltage push-pull output driven from the VPP supply (up to 200V), designed to source and sink ±1.0mA.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-32-EP(5x5)
Category Nixie Tube Driver/LED Driver
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic supply voltage VDD 2 3 5.5 V 2
Level translator supply voltage VBIAS 2.6 6.6 V 2
Positive high voltage supply VPP 50 200 V 2
Operating temperature TA 0 70 °C 2
Low-level input voltage VIL 0 V 2
Logic supply, VDD VDD -0.5 7 V 2
Translator supply voltage VBIAS -0.5 7 V 2
High voltage supply VPP 215 V 2
Logic input levels -0.5 V 2
Operating junction temperature -40 125 °C 2
Storage temperature range -65 150 °C 2
VDD supply current IDD 1 mA fCLK = 500kHz 3
Quiescent VDD supply current IDDQ 10 µA All logic inputs = VDD or 0V 3
VBIAS supply current IBIAS 100 µA All HVOUTS switching at 1kHz. Peak IBIAS = 200mA with all channels switching 3
Quiescent VBIAS current IBIASQ 10 µA No HVOUT switching 3
Quiescent VPP supply current IPPQ 100 µA VPP = 200V, outputs are static 3
High-level logic input current IIH 10 µA VIH = VDD 3
Low-level logic input current IIL -10 µA VIL = 0V 3
Low level output HVOUT & BP VOL 12 V IHVOUT = 1.0mA, VBIAS = 5.4V, VPP = +50 to +200V 3
Low level output DOUT VOL 1 V IDOUT = 1.0mA 3
Logic input capacitance CDIN 10 pF 3
Logic output capacitance CDOUT 10 pF 3
Clock frequency fCLK 0 500 kHz 3
Clock high / low pulse width tC 1 µs 3
Data setup time before clock rises tSU 50 ns 3
Data hold time after clock rises tH 50 ns 3
LE from CLK setup time tCLE 15 ns 3
LE pulse width tWLE 100 ns 3
Clock negative edge to DOUT delay tDD 150 ns CLDOUT = 50pF, (CLDOUT includes CDIN and CDOUT) 3
Delay time from inputs for HVOUT / BP to start rise/fall tPHV 500 ns VPP = 200V, VBIAS = 5.4V 3
HVOUTPUT / BP rise time tOR 300 µs CL = 1500pF, VPP = 200V 3
HVOUTPUT / BP fall time tOF 300 µs CL = 1500pF, VBIAS = 5.4V, VPP = 200V 3

CAD (KiCad official)

  • Symbol: HV509K6-G
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: hv509k6-g-etched.step / hv509k6-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv509k6-g.step / hv509k6-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (8 pp, sha256 6d244ab486bbc0a6, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF