# HV1C337M0607PZ

**Honor Elec** · Polymer Aluminum Capacitors · CP_Elec_6.3x7.7

HV1C337M0607PZ from Honor Elec, in a CP_Elec_6.3x7.7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end). |
| 2 | - | passive | Negative terminal. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Honor Elec |
| Package | CP_Elec_6.3x7.7 |
| Category | Capacitors |
| Pins | 2 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Capacitance tolerance (code M) |  | -20 |  | 20 | % | 120 Hz, +20°C | 1 |
| Dissipation factor (tanδ) | tanδ |  |  | 0.12 | % | 20°C, 120 Hz | 3 |
| Leakage current (LC) | LC |  |  | 1056 | uA | +20°C, rated voltage applied, after 2 minutes | 3 |
| Equivalent series resistance (ESR) | ESR |  |  | 35 | mΩ | 20°C, 100 kHz | 3 |
| Rated ripple current (RC) | RC |  |  | 2550 | mArms | 105°C, 100 kHz | 3 |
| Operating temperature range |  | -55 |  | 105 | °C |  | 1 |
| Surge voltage (16 V rating) |  |  |  | 18.4 | V | 105°C, 1000 Ω series resistor, 30 s charge / 5 min discharge, 1000 cycles | 11 |
| DC voltage plus peak AC voltage |  |  |  | 16 | V | Must not exceed rated voltage; no reverse charging | 10 |
| Negative ripple voltage at low DC bias |  | -10 |  |  | % of rated voltage | When DC voltage is low | 17 |
| Reverse transient voltage (power cut-off) |  |  |  | 20 | % of rated voltage | Transition phenomenon when power source is cut off | 17 |
| Capacitance change after endurance |  | -20 |  | 20 | % | 105°C, 2000 h at rated voltage; within ±20% of initial value | 11 |
| ESR after endurance | ESR |  |  | 150 | % of specified value | 105°C, 2000 h at rated voltage | 11 |
| Dissipation factor after endurance | tanδ |  |  | 150 | % of specified value | 105°C, 2000 h at rated voltage | 11 |
| ESR ratio Z(-55°C)/Z(20°C) | Z(-55)/Z(20) |  |  | 2.5 |  | Temperature step -55°C±3°C, 2 hours | 12 |
| ESR ratio Z(+105°C)/Z(20°C) | Z(105)/Z(20) |  |  | 1.25 |  | Temperature step 105°C±3°C, 2 hours | 12 |
| Leakage current ratio LC(105°C)/LC(SPEC) | LC(105)/LC(SPEC) |  |  | 12.5 |  | Temperature step 105°C±3°C, 2 hours; LC(SPEC) is initial specified value | 12 |
| Capacitance change after vibration |  | -5 |  | 5 | % | 10-55 Hz, 0.75 mm amplitude, X/Y/Z, 2 h per direction | 13 |
| Capacitance change after solder heat |  | -5 |  | 5 | % | Solder bath 260±5°C for 10±1 s, or iron 400±10°C for 3+1/-0 s | 14 |
| Reflow peak temperature |  |  |  | 255 | °C | Lead-free reflow; peak 255°C for ≤30 s (230-255°C range) | 14 |
| Preheat temperature |  |  |  | 200 | °C | Preheat ≤90 s (170-200°C range) | 14 |
| Solder bath temperature |  |  |  | 260 | °C | Tin groove method, 10±1 s | 13 |
| Soldering iron temperature |  |  |  | 400 | °C | Soldering iron method, 3+1/-0 s | 13 |
| Rated capacitance | C |  | 330 |  | uF | 120 Hz, +20°C | 3 |
| Rated working voltage |  |  | 16 |  | V | Voltage code 1C | 3 |
| Body length L | L | -0.3 | 7.7 | 0.3 | mm | Size code 0607 (6.3×7.7) | 8 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | pins have no broken and loose 12> 可焊性试验 Solderability test 焊料： 约 25%松香/乙醇溶液，焊料 Sn-Ag-Cu | 13 |

## CAD (KiCad official)

- Symbol: `HV1C337M0607PZ`
- Footprint: `Capacitor_SMD:CP_Elec_6.3x7.7`
- 3D model: CP_Elec_6.3x7.7 (KiCad packages3D, STEP)
- 3D model files: `hv1c337m0607pz-etched.step` / `hv1c337m0607pz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hv1c337m0607pz.step` / `hv1c337m0607pz.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Honor Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757297232372875264) (20 pp, sha256 `86964f0a7151ff28`, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/hv1c337m0607pz-datasheet.pdf)