component
HV1C337M0607PZ
Public Made by Adomby adom
Honor Elec Polymer Aluminum Capacitors, SMD,D6.3xL7.7mm. Polarised capacitor: pin 1 is + by the KiCad polarised-footprint convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHV1C337M0607PZ
Honor Elec · Polymer Aluminum Capacitors · CP_Elec_6.3x7.7
HV1C337M0607PZ from Honor Elec, in a CP_Elec_6.3x7.7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end). |
| 2 | - | passive | Negative terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Honor Elec |
| Package | CP_Elec_6.3x7.7 |
| Category | Capacitors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Capacitance tolerance (code M) | -20 | 20 | % | 120 Hz, +20°C | 1 | ||
| Dissipation factor (tanδ) | tanδ | 0.12 | % | 20°C, 120 Hz | 3 | ||
| Leakage current (LC) | LC | 1056 | uA | +20°C, rated voltage applied, after 2 minutes | 3 | ||
| Equivalent series resistance (ESR) | ESR | 35 | mΩ | 20°C, 100 kHz | 3 | ||
| Rated ripple current (RC) | RC | 2550 | mArms | 105°C, 100 kHz | 3 | ||
| Operating temperature range | -55 | 105 | °C | 1 | |||
| Surge voltage (16 V rating) | 18.4 | V | 105°C, 1000 Ω series resistor, 30 s charge / 5 min discharge, 1000 cycles | 11 | |||
| DC voltage plus peak AC voltage | 16 | V | Must not exceed rated voltage; no reverse charging | 10 | |||
| Negative ripple voltage at low DC bias | -10 | % of rated voltage | When DC voltage is low | 17 | |||
| Reverse transient voltage (power cut-off) | 20 | % of rated voltage | Transition phenomenon when power source is cut off | 17 | |||
| Capacitance change after endurance | -20 | 20 | % | 105°C, 2000 h at rated voltage; within ±20% of initial value | 11 | ||
| ESR after endurance | ESR | 150 | % of specified value | 105°C, 2000 h at rated voltage | 11 | ||
| Dissipation factor after endurance | tanδ | 150 | % of specified value | 105°C, 2000 h at rated voltage | 11 | ||
| ESR ratio Z(-55°C)/Z(20°C) | Z(-55)/Z(20) | 2.5 | Temperature step -55°C±3°C, 2 hours | 12 | |||
| ESR ratio Z(+105°C)/Z(20°C) | Z(105)/Z(20) | 1.25 | Temperature step 105°C±3°C, 2 hours | 12 | |||
| Leakage current ratio LC(105°C)/LC(SPEC) | LC(105)/LC(SPEC) | 12.5 | Temperature step 105°C±3°C, 2 hours; LC(SPEC) is initial specified value | 12 | |||
| Capacitance change after vibration | -5 | 5 | % | 10-55 Hz, 0.75 mm amplitude, X/Y/Z, 2 h per direction | 13 | ||
| Capacitance change after solder heat | -5 | 5 | % | Solder bath 260±5°C for 10±1 s, or iron 400±10°C for 3+1/-0 s | 14 | ||
| Reflow peak temperature | 255 | °C | Lead-free reflow; peak 255°C for ≤30 s (230-255°C range) | 14 | |||
| Preheat temperature | 200 | °C | Preheat ≤90 s (170-200°C range) | 14 | |||
| Solder bath temperature | 260 | °C | Tin groove method, 10±1 s | 13 | |||
| Soldering iron temperature | 400 | °C | Soldering iron method, 3+1/-0 s | 13 | |||
| Rated capacitance | C | 330 | uF | 120 Hz, +20°C | 3 | ||
| Rated working voltage | 16 | V | Voltage code 1C | 3 | |||
| Body length L | L | -0.3 | 7.7 | 0.3 | mm | Size code 0607 (6.3×7.7) | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | pins have no broken and loose 12> 可焊性试验 Solderability test 焊料： 约 25%松香/乙醇溶液，焊料 Sn-Ag-Cu | 13 |
CAD (KiCad official)
- Symbol:
HV1C337M0607PZ - Footprint:
Capacitor_SMD:CP_Elec_6.3x7.7 - 3D model: CP_Elec_6.3x7.7 (KiCad packages3D, STEP)
- 3D model files:
hv1c337m0607pz-etched.step/hv1c337m0607pz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hv1c337m0607pz.step/hv1c337m0607pz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Honor Elec datasheet (20 pp, sha256
86964f0a7151ff28, retrieved 2026-11-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).