main
Ray
Publish 0.1.0
4cb5233
HT8377ARTZ
HTCSEMI · Operational Amplifier · SOT-23-5
HT8377ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output whose voltage range extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Ground pin, connect to the most negative supply. |
| 3 | INP | input | Non-inverting input of the amplifier, with a voltage range from 0 to VDD. |
| 4 | INN | input | Inverting input of the amplifier, with the same voltage range as INP. |
| 5 | VDD | power_in | Positive power supply pin, 2.5V to 5.5V operating range (5V listed in the pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply (absolute maximum) | VDD | 6 | V | 2 | |||
| Operating ambient temperature range (absolute maximum) | TA | -40 | 125 | ℃ | 2 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 2 | ||
| Power supply (recommended operating) | VDD | 2.5 | 5.5 | V | 2 | ||
| Operating ambient temperature range (recommended operating) | TA | -40 | 125 | ℃ | 2 | ||
| Operating Supply Voltage | VCC | 2.5 | 5 | 5.5 | V | 3 | |
| Input Offset Voltage | VOS | -1 | 0.5 | 1 | mV | 3 | |
| Common mode Input voltage | Vin_cm | 0 | V | 3 | |||
| Quiescent Current per Amplifier | IQ | 150 | 330 | uA | 3 | ||
| Input Resistance | RIN | 100 | GΩ | 3 | |||
| Output Voltage from supply Swing | VOL | 10 | mV | 3 | |||
| Common Mode Rejection Ratio | CMRR | 100 | dB | 3 | |||
| Output short-circuit current | ISC | 80 | mA | 3 | |||
| Phase Margin | PM | 65 | ° | 3 | |||
| Gain Margin | GM | -10 | dB | 3 | |||
| Gain-Bandwidth Product | GBWP | 6 | MHz | 3 | |||
| Output Current | Iout | 50 | mA | 3 | |||
| Settling time | ts | 0.46 | µs | 1.5V to 3.5V, Unity Gain, 0.1% | 3 | ||
| Slew Rate | SR | 3.7 | µs | 3 | |||
| Total Harmonic Distortion and Noise | THD+Noise | 0.0007 | % | f=1KHz | 3 | ||
| Input Voltage Noise Density | en | 25 | nV/√Hz | f=1KHz | 3 | ||
| Input Capacitance Differential | CIN | 1.5 | pF | 3 | |||
| Input Capacitance Common Mode | CIN | 3 | pF | 3 | |||
| Input offset voltage temp drift | VOS_TC | 4 | µV/℃ | 3 | |||
| Power supply rejection ratio | PSRR | 100 | dB | 1Hz | 3 | ||
| Power supply rejection ratio | PSRR | 72 | dB | 1KHz | 3 |
CAD (KiCad official)
- Symbol:
HT8377ARTZ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ht8377artz-etched.step/ht8377artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht8377artz.step/ht8377artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (6 pp, sha256
d34da976af5cccf5, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT8377ARTZ
**HTCSEMI** · Operational Amplifier · SOT-23-5
HT8377ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output whose voltage range extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Ground pin, connect to the most negative supply. |
| 3 | INP | input | Non-inverting input of the amplifier, with a voltage range from 0 to VDD. |
| 4 | INN | input | Inverting input of the amplifier, with the same voltage range as INP. |
| 5 | VDD | power_in | Positive power supply pin, 2.5V to 5.5V operating range (5V listed in the pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply (absolute maximum) | VDD | | | 6 | V | | 2 |
| Operating ambient temperature range (absolute maximum) | TA | -40 | | 125 | ℃ | | 2 |
| Storage temperature | TSTG | -65 | | 150 | ℃ | | 2 |
| Power supply (recommended operating) | VDD | 2.5 | | 5.5 | V | | 2 |
| Operating ambient temperature range (recommended operating) | TA | -40 | | 125 | ℃ | | 2 |
| Operating Supply Voltage | VCC | 2.5 | 5 | 5.5 | V | | 3 |
| Input Offset Voltage | VOS | -1 | 0.5 | 1 | mV | | 3 |
| Common mode Input voltage | Vin_cm | 0 | | | V | | 3 |
| Quiescent Current per Amplifier | IQ | | 150 | 330 | uA | | 3 |
| Input Resistance | RIN | 100 | | | GΩ | | 3 |
| Output Voltage from supply Swing | VOL | | 10 | | mV | | 3 |
| Common Mode Rejection Ratio | CMRR | | 100 | | dB | | 3 |
| Output short-circuit current | ISC | | 80 | | mA | | 3 |
| Phase Margin | PM | | 65 | | ° | | 3 |
| Gain Margin | GM | | -10 | | dB | | 3 |
| Gain-Bandwidth Product | GBWP | | 6 | | MHz | | 3 |
| Output Current | Iout | | 50 | | mA | | 3 |
| Settling time | ts | | 0.46 | | µs | 1.5V to 3.5V, Unity Gain, 0.1% | 3 |
| Slew Rate | SR | | 3.7 | | µs | | 3 |
| Total Harmonic Distortion and Noise | THD+Noise | | 0.0007 | | % | f=1KHz | 3 |
| Input Voltage Noise Density | en | | 25 | | nV/√Hz | f=1KHz | 3 |
| Input Capacitance Differential | CIN | | 1.5 | | pF | | 3 |
| Input Capacitance Common Mode | CIN | | 3 | | pF | | 3 |
| Input offset voltage temp drift | VOS_TC | | 4 | | µV/℃ | | 3 |
| Power supply rejection ratio | PSRR | | 100 | | dB | 1Hz | 3 |
| Power supply rejection ratio | PSRR | | 72 | | dB | 1KHz | 3 |
## CAD (KiCad official)
- Symbol: `HT8377ARTZ`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ht8377artz-etched.step` / `ht8377artz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht8377artz.step` / `ht8377artz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht8377artz-datasheet.pdf) (6 pp, sha256 `d34da976af5cccf5`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht8377artz-datasheet.pdf)