main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ht8377artz: viewers rendered from the public page · Ray
ht8377artz-etched.glb ht8377artz: factory component page (tier=lcsc) · Ray
ht8377artz-etched.step ht8377artz: factory component page (tier=lcsc) · Ray
ht8377artz-hero.glb ht8377artz: hero GLB from the etched model (keeps the MPN mark) · Ray
ht8377artz-hero.overlay.json ht8377artz: hero GLB from the etched model (keeps the MPN mark) · Ray
ht8377artz.glb Publish 0.1.0 · Ray
ht8377artz.kicad_mod Publish 0.1.0 · Ray
ht8377artz.kicad_sym Publish 0.1.0 · Ray
ht8377artz.lbr Publish 0.1.0 · Ray
ht8377artz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

HT8377ARTZ

HTCSEMI · Operational Amplifier · SOT-23-5

HT8377ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output whose voltage range extends to within millivolts of each supply rail.
2 GND power_in Ground pin, connect to the most negative supply.
3 INP input Non-inverting input of the amplifier, with a voltage range from 0 to VDD.
4 INN input Inverting input of the amplifier, with the same voltage range as INP.
5 VDD power_in Positive power supply pin, 2.5V to 5.5V operating range (5V listed in the pin table).

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply (absolute maximum) VDD 6 V 2
Operating ambient temperature range (absolute maximum) TA -40 125 ℃ 2
Storage temperature TSTG -65 150 ℃ 2
Power supply (recommended operating) VDD 2.5 5.5 V 2
Operating ambient temperature range (recommended operating) TA -40 125 ℃ 2
Operating Supply Voltage VCC 2.5 5 5.5 V 3
Input Offset Voltage VOS -1 0.5 1 mV 3
Common mode Input voltage Vin_cm 0 V 3
Quiescent Current per Amplifier IQ 150 330 uA 3
Input Resistance RIN 100 GΩ 3
Output Voltage from supply Swing VOL 10 mV 3
Common Mode Rejection Ratio CMRR 100 dB 3
Output short-circuit current ISC 80 mA 3
Phase Margin PM 65 ° 3
Gain Margin GM -10 dB 3
Gain-Bandwidth Product GBWP 6 MHz 3
Output Current Iout 50 mA 3
Settling time ts 0.46 µs 1.5V to 3.5V, Unity Gain, 0.1% 3
Slew Rate SR 3.7 µs 3
Total Harmonic Distortion and Noise THD+Noise 0.0007 % f=1KHz 3
Input Voltage Noise Density en 25 nV/√Hz f=1KHz 3
Input Capacitance Differential CIN 1.5 pF 3
Input Capacitance Common Mode CIN 3 pF 3
Input offset voltage temp drift VOS_TC 4 µV/℃ 3
Power supply rejection ratio PSRR 100 dB 1Hz 3
Power supply rejection ratio PSRR 72 dB 1KHz 3

CAD (KiCad official)

  • Symbol: HT8377ARTZ
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ht8377artz-etched.step / ht8377artz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht8377artz.step / ht8377artz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (6 pp, sha256 d34da976af5cccf5, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF